A

AuthorizationExceptionClass in namespace Illuminate\Auth\Access
$ GateEvaluated#abilityProperty in class GateEvaluated

The ability being evaluated.

$ GateEvaluated#argumentsProperty in class GateEvaluated

The arguments given during evaluation.

$ Gate#abilitiesProperty in class Gate

All of the defined abilities.

$ Gate#afterCallbacksProperty in class Gate

All of the registered after callbacks.

Gate::after() — Method in class Gate

Register a callback to run after all Gate checks.

Gate::allows() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::any() — Method in class Gate

Determine if any one of the given abilities should be granted for the current user.

Gate::authorize() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::abilities() — Method in class Gate

Get all of the defined abilities.

HandlesAuthorization::allow() — Method in class HandlesAuthorization

Create a new access response.

$ Response#allowedProperty in class Response

Indicates whether the response was allowed.

Response::allow() — Method in class Response

Create a new "allow" Response.

Response::allowed() — Method in class Response

Determine if the response was allowed.

Response::authorize() — Method in class Response

Throw authorization exception if response was denied.

AuthManagerClass in namespace Illuminate\Auth
$ AuthManager#appProperty in class AuthManager

The application instance.

AuthServiceProviderClass in namespace Illuminate\Auth
AuthenticatableClass in namespace Illuminate\Auth
AuthenticationExceptionClass in namespace Illuminate\Auth
AttemptingClass in namespace Illuminate\Auth\Events
AuthenticatedClass in namespace Illuminate\Auth\Events
$ GenericUser#attributesProperty in class GenericUser

All of the user's attributes.

GuardHelpers::authenticate() — Method in class GuardHelpers

Determine if the current user is authenticated. If not, throw an exception.

AuthenticateClass in namespace Illuminate\Auth\Middleware
$ Authenticate#authProperty in class Authenticate

The authentication factory instance.

Authenticate::authenticate() — Method in class Authenticate

Determine if the user is logged in to any of the given guards.

AuthenticateWithBasicAuthClass in namespace Illuminate\Auth\Middleware
$ AuthenticateWithBasicAuth#authProperty in class AuthenticateWithBasicAuth

The guard factory instance.

AuthorizeClass in namespace Illuminate\Auth\Middleware
$ PasswordBrokerManager#appProperty in class PasswordBrokerManager

The application instance.

SessionGuard::attemptBasic() — Method in class SessionGuard

Attempt to authenticate using basic authentication.

SessionGuard::attempt() — Method in class SessionGuard

Attempt to authenticate a user using the given credentials.

SessionGuard::attemptWhen() — Method in class SessionGuard

Attempt to authenticate a user with credentials and additional callbacks.

SessionGuard::attempting() — Method in class SessionGuard

Register an authentication attempt event listener.

BroadcastController::authenticate() — Method in class BroadcastController

Authenticate the request for channel access.

$ BroadcastManager#appProperty in class BroadcastManager

The application instance.

AblyBroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ AblyBroadcaster#ablyProperty in class AblyBroadcaster

The AblyRest SDK instance.

AblyBroadcaster::auth() — Method in class AblyBroadcaster

Authenticate the incoming request for a given channel.

LogBroadcaster::auth() — Method in class LogBroadcaster

Authenticate the incoming request for a given channel.

NullBroadcaster::auth() — Method in class NullBroadcaster

Authenticate the incoming request for a given channel.

PusherBroadcaster::auth() — Method in class PusherBroadcaster

Authenticate the incoming request for a given channel.

RedisBroadcaster::auth() — Method in class RedisBroadcaster

Authenticate the incoming request for a given channel.

Batch::add() — Method in class Batch

Add additional jobs to the batch.

Batch::allowsFailures() — Method in class Batch

Determine if the batch allows jobs to fail without cancelling the batch.

PendingBatch::add() — Method in class PendingBatch

Add jobs to the batch.

PendingBatch::allowFailures() — Method in class PendingBatch

Indicate that the batch should not be cancelled when a job within the batch fails.

PendingBatch::allowsFailures() — Method in class PendingBatch

Determine if the pending batch allows jobs to fail without cancelling the batch.

$ Queueable#afterCommitProperty in class Queueable

Indicates whether the job should be dispatched after all database transactions have committed.

Queueable::allOnConnection() — Method in class Queueable

Set the desired connection for the chain.

Queueable::allOnQueue() — Method in class Queueable

Set the desired queue for the chain.

Queueable::afterCommit() — Method in class Queueable

Indicate that the job should be dispatched after all database transactions have committed.

UpdatedBatchJobCounts::allJobsHaveRanExactlyOnce() — Method in class UpdatedBatchJobCounts

Determine if all jobs have run exactly once.

ApcStoreClass in namespace Illuminate\Cache
$ ApcStore#apcProperty in class ApcStore

The APC wrapper instance.

ApcWrapperClass in namespace Illuminate\Cache
$ ApcWrapper#apcuProperty in class ApcWrapper

Indicates if APCu is supported.

ArrayLockClass in namespace Illuminate\Cache
ArrayLock::acquire() — Method in class ArrayLock

Attempt to acquire the lock.

ArrayStoreClass in namespace Illuminate\Cache
CacheLock::acquire() — Method in class CacheLock

Attempt to acquire the lock.

$ CacheManager#appProperty in class CacheManager

The application instance.

DatabaseLock::acquire() — Method in class DatabaseLock

Attempt to acquire the lock.

DatabaseStore::add() — Method in class DatabaseStore

Store an item in the cache if the key doesn't exist.

DynamoDbLock::acquire() — Method in class DynamoDbLock

Attempt to acquire the lock.

DynamoDbStore::add() — Method in class DynamoDbStore

Store an item in the cache if the key doesn't exist.

FileStore::add() — Method in class FileStore

Store an item in the cache if the key doesn't exist.

Lock::acquire() — Method in class Lock

Attempt to acquire the lock.

MemcachedLock::acquire() — Method in class MemcachedLock

Attempt to acquire the lock.

MemcachedStore::add() — Method in class MemcachedStore

Store an item in the cache if the key doesn't exist.

NoLock::acquire() — Method in class NoLock

Attempt to acquire the lock.

RateLimiter::attempt() — Method in class RateLimiter

Attempts to execute a callback if it's not limited.

RateLimiter::attempts() — Method in class RateLimiter

Get the number of attempts for the given key.

RateLimiter::availableIn() — Method in class RateLimiter

Get the number of seconds until the "key" is accessible again.

RedisLock::acquire() — Method in class RedisLock

Attempt to acquire the lock.

RedisStore::add() — Method in class RedisStore

Store an item in the cache if the key doesn't exist.

Repository::add() — Method in class Repository

Store an item in the cache if the key does not exist.

Repository::all() — Method in class Repository

Get all of the configuration items for the application.

ApplicationClass in namespace Illuminate\Console
Application::artisanBinary() — Method in class Application

Determine the proper Artisan executable.

Application::add() — Method in class Application

Add a command to the console.

Application::addToParent() — Method in class Application

Add the command to the parent instance.

InteractsWithIO::argument() — Method in class InteractsWithIO

Get the value of a command argument.

InteractsWithIO::arguments() — Method in class InteractsWithIO

Get all of the arguments passed to the command.

InteractsWithIO::ask() — Method in class InteractsWithIO

Prompt the user for input.

InteractsWithIO::anticipate() — Method in class InteractsWithIO

Prompt the user for input with auto completion.

InteractsWithIO::askWithCompletion() — Method in class InteractsWithIO

Prompt the user for input with auto completion.

InteractsWithIO::alert() — Method in class InteractsWithIO

Write a string in an alert box.

ArtisanStartingClass in namespace Illuminate\Console\Events
$ ArtisanStarting#artisanProperty in class ArtisanStarting

The Artisan application instance.

GeneratorCommand::alreadyExists() — Method in class GeneratorCommand

Determine if the class already exists.

$ Event#afterCallbacksProperty in class Event

The array of callbacks to be run after the event is finished.

Event::appendOutputTo() — Method in class Event

Append the output of the command to a given location.

Event::after() — Method in class Event

Register a callback to be called after the operation.

ManagesFrequencies::at() — Method in class ManagesFrequencies

Schedule the command at a given time.

BoundMethod::addDependencyForCallParameter() — Method in class BoundMethod

Get the dependency for the given call parameter.

$ Container#aliasesProperty in class Container

The registered type aliases.

$ Container#abstractAliasesProperty in class Container

The registered aliases keyed by the abstract name.

$ Container#afterResolvingCallbacksProperty in class Container

All of the after resolving callbacks by class type.

Container::addContextualBinding() — Method in class Container

Add a contextual binding to the container.

Container::alias() — Method in class Container

Alias a type to a different name.

Container::afterResolving() — Method in class Container

Register a new after resolving callback for all types.

Util::arrayWrap() — Method in class Util

If the given value is not an array and not null, wrap it in one.

AuthorizableClass in namespace Illuminate\Contracts\Auth\Access
Gate::after() — Method in class Gate

Register a callback to run after all Gate checks.

Gate::allows() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::any() — Method in class Gate

Determine if any one of the given abilities should be granted for the current user.

Gate::authorize() — Method in class Gate

Determine if the given ability should be granted for the current user.

Gate::abilities() — Method in class Gate

Get all of the defined abilities.

AuthenticatableClass in namespace Illuminate\Contracts\Auth
AuthenticatesRequestsClass in namespace Illuminate\Contracts\Auth\Middleware
StatefulGuard::attempt() — Method in class StatefulGuard

Attempt to authenticate a user using the given credentials.

Broadcaster::auth() — Method in class Broadcaster

Authenticate the incoming request for a given channel.

Repository::add() — Method in class Repository

Store an item in the cache if the key does not exist.

Repository::all() — Method in class Repository

Get all of the configuration items for the application.

ApplicationClass in namespace Illuminate\Contracts\Console
Kernel::all() — Method in class Kernel

Get all of the commands registered with the console.

Container::alias() — Method in class Container

Alias a type to a different name.

Container::addContextualBinding() — Method in class Container

Add a contextual binding to the container.

Container::afterResolving() — Method in class Container

Register a new after resolving callback.

Builder::addSelect() — Method in class Builder

Add a new select column to the query.

Builder::addNestedWhereQuery() — Method in class Builder

Add another query builder as a nested where to the query builder.

Builder::addBinding() — Method in class Builder

Add a binding to the query.

Filesystem::append() — Method in class Filesystem

Append to a file.

Filesystem::allFiles() — Method in class Filesystem

Get all of the files from the given directory (recursive).

Filesystem::allDirectories() — Method in class Filesystem

Get all (recursive) of the directories within a given directory.

ApplicationClass in namespace Illuminate\Contracts\Foundation
CursorPaginator::appends() — Method in class CursorPaginator

Add a set of query string values to the paginator.

Paginator::appends() — Method in class Paginator

Add a set of query string values to the paginator.

Job::attempts() — Method in class Job

Get the number of times the job has been attempted.

UrlGenerator::asset() — Method in class UrlGenerator

Generate the URL to an application asset.

UrlGenerator::action() — Method in class UrlGenerator

Get the URL to a controller action.

Session::all() — Method in class Session

Get all of the session data.

ArrayableClass in namespace Illuminate\Contracts\Support
MessageBag::add() — Method in class MessageBag

Add a message to the bag.

MessageBag::all() — Method in class MessageBag

Get all of the messages for every key in the bag.

Loader::addNamespace() — Method in class Loader

Add a new namespace to the loader.

Loader::addJsonPath() — Method in class Loader

Add a new JSON path to the loader.

Validator::after() — Method in class Validator

Add an after validation callback.

Factory::addNamespace() — Method in class Factory

Add a new namespace to the loader.

AddQueuedCookiesToResponseClass in namespace Illuminate\Cookie\Middleware
Manager::addConnection() — Method in class Manager

Register a connection with the manager.

ManagesTransactions::afterCommit() — Method in class ManagesTransactions

Execute the callback after a transaction commits.

Connection::affectingStatement() — Method in class Connection

Run an SQL statement and get the number of rows affected.

ConnectionInterface::affectingStatement() — Method in class ConnectionInterface

Run an SQL statement and get the number of rows affected.

ConnectionResolver::addConnection() — Method in class ConnectionResolver

Add a connection to the resolver.

PostgresConnector::addSslOptions() — Method in class PostgresConnector

Add the SSL options to the DSN.

$ DatabaseManager#appProperty in class DatabaseManager

The application instance.

DatabaseManager::availableDrivers() — Method in class DatabaseManager

Get all of the drivers that are actually available.

DatabaseTransactionRecord::addCallback() — Method in class DatabaseTransactionRecord

Register a callback to be executed after committing.

DatabaseTransactionsManager::addCallback() — Method in class DatabaseTransactionsManager

Register a transaction callback.

Builder::addUpdatedAtColumn() — Method in class Builder

Add the "updated at" column to an array of values.

Builder::addTimestampsToUpsertValues() — Method in class Builder

Add timestamps to the inserted values.

Builder::addUpdatedAtToUpsertColumns() — Method in class Builder

Add the "updated at" column to the updated columns.

Builder::applyScopes() — Method in class Builder

Apply the scopes to the Eloquent builder instance and return it.

Builder::addNewWheresWithinGroup() — Method in class Builder

Nest where conditions by slicing them at the given where count.

Builder::addNestedWiths() — Method in class Builder

Parse the nested relationships in a relation.

ArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsCollectionClass in namespace Illuminate\Database\Eloquent\Casts
AsEncryptedArrayObjectClass in namespace Illuminate\Database\Eloquent\Casts
AsEncryptedCollectionClass in namespace Illuminate\Database\Eloquent\Casts
Collection::append() — Method in class Collection

Append an attribute across the entire collection.

DecoratesQueryBuilder::addSelect() — Method in class DecoratesQueryBuilder

{@inheritdoc}

DecoratesQueryBuilder::addNestedWhereQuery() — Method in class DecoratesQueryBuilder

{@inheritdoc}

DecoratesQueryBuilder::avg() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::average() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::aggregate() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::addBinding() — Method in class DecoratesQueryBuilder
$ HasAttributes#attributesProperty in class HasAttributes

The model's attributes.

$ HasAttributes#appendsProperty in class HasAttributes

The accessors to append to the model's array form.

HasAttributes::attributesToArray() — Method in class HasAttributes

Convert the model's attributes to an array.

HasAttributes::addDateAttributesToArray() — Method in class HasAttributes

Add the date attributes to the attributes array.

HasAttributes::addMutatedAttributesToArray() — Method in class HasAttributes

Add the mutated attributes to the attributes array.

HasAttributes::addCastAttributesToArray() — Method in class HasAttributes

Add the casted attributes to the attributes array.

HasAttributes::asJson() — Method in class HasAttributes

Encode the given value as JSON.

HasAttributes::asDecimal() — Method in class HasAttributes

Return a decimal as string.

HasAttributes::asDate() — Method in class HasAttributes

Return a timestamp as DateTime object with time set to 00:00:00.

HasAttributes::asDateTime() — Method in class HasAttributes

Return a timestamp as DateTime object.

HasAttributes::asTimestamp() — Method in class HasAttributes

Return a timestamp as unix timestamp.

HasAttributes::append() — Method in class HasAttributes

Append attributes to query when building a query.

HasEvents::addObservableEvents() — Method in class HasEvents

Add an observable event name.

HasGlobalScopes::addGlobalScope() — Method in class HasGlobalScopes

Register a new global scope on the model.

QueriesRelationships::addHasWhere() — Method in class QueriesRelationships

Add the "has" condition where clause to the query.

QueriesRelationships::addWhereCountQuery() — Method in class QueriesRelationships

Add a sub-query count clause to this query.

BelongsToRelationship::attributesFor() — Method in class BelongsToRelationship

Get the parent model attributes and resolvers for the given child model.

$ Factory#afterMakingProperty in class Factory

The "after making" callbacks that will be applied to the model.

$ Factory#afterCreatingProperty in class Factory

The "after creating" callbacks that will be applied to the model.

Factory::afterMaking() — Method in class Factory

Add a new "after making" callback to the model definition.

Factory::afterCreating() — Method in class Factory

Add a new "after creating" callback to the model definition.

Factory::appNamespace() — Method in class Factory

Get the application namespace for the application.

Model::all() — Method in class Model

Get all of the models from the database.

BelongsTo::addConstraints() — Method in class BelongsTo

Set the base constraints on the relation query.

BelongsTo::addEagerConstraints() — Method in class BelongsTo

Set the constraints for an eager load of the relation.

BelongsTo::associate() — Method in class BelongsTo

Associate the model instance to the given parent.

$ BelongsToMany#accessorProperty in class BelongsToMany

The name of the accessor to use for the "pivot" relationship.

BelongsToMany::addConstraints() — Method in class BelongsToMany

Set the base constraints on the relation query.

BelongsToMany::addWhereConstraints() — Method in class BelongsToMany

Set the where clause for the relation query.

BelongsToMany::addEagerConstraints() — Method in class BelongsToMany

Set the constraints for an eager load of the relation.

BelongsToMany::as() — Method in class BelongsToMany

Specify the custom pivot accessor to use for the relationship.

BelongsToMany::aliasedPivotColumns() — Method in class BelongsToMany

Get the pivot columns for the relation.

BelongsToMany::allRelatedIds() — Method in class BelongsToMany

Get all of the IDs for the related models.

AsPivotClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
CanBeOneOfMany::addOneOfManySubQueryConstraints() — Method in class CanBeOneOfMany

Add constraints for inner join subselect for one of many relationships.

CanBeOneOfMany::addOneOfManyJoinSubQueryConstraints() — Method in class CanBeOneOfMany

Add join query constraints for one of many relationships.

CanBeOneOfMany::addOneOfManyJoinSubQuery() — Method in class CanBeOneOfMany

Add the join subquery to the given query on the given column and the relationship's foreign key.

InteractsWithPivotTable::attachNew() — Method in class InteractsWithPivotTable

Attach all of the records that aren't in the given current records.

InteractsWithPivotTable::attach() — Method in class InteractsWithPivotTable

Attach a model to the parent.

InteractsWithPivotTable::attachUsingCustomClass() — Method in class InteractsWithPivotTable

Attach a model to the parent using a custom class.

InteractsWithPivotTable::addTimestampsToAttachment() — Method in class InteractsWithPivotTable

Set the creation and update timestamps on an attach record.

HasManyThrough::addConstraints() — Method in class HasManyThrough

Set the base constraints on the relation query.

HasManyThrough::addEagerConstraints() — Method in class HasManyThrough

Set the constraints for an eager load of the relation.

HasOne::addOneOfManySubQueryConstraints() — Method in class HasOne

Add constraints for inner join subselect for one of many relationships.

HasOne::addOneOfManyJoinSubQueryConstraints() — Method in class HasOne

Add join query constraints for one of many relationships.

HasOneOrMany::addConstraints() — Method in class HasOneOrMany

Set the base constraints on the relation query.

HasOneOrMany::addEagerConstraints() — Method in class HasOneOrMany

Set the constraints for an eager load of the relation.

MorphOne::addOneOfManySubQueryConstraints() — Method in class MorphOne

Add constraints for inner join subselect for one of many relationships.

MorphOne::addOneOfManyJoinSubQueryConstraints() — Method in class MorphOne

Add join query constraints for one of many relationships.

MorphOneOrMany::addConstraints() — Method in class MorphOneOrMany

Set the base constraints on the relation query.

MorphOneOrMany::addEagerConstraints() — Method in class MorphOneOrMany

Set the constraints for an eager load of the relation.

MorphTo::addSelect() — Method in class MorphTo

{@inheritdoc}

MorphTo::addEagerConstraints() — Method in class MorphTo

Set the constraints for an eager load of the relation.

MorphTo::associate() — Method in class MorphTo

Associate the model instance to the given parent.

MorphToMany::addWhereConstraints() — Method in class MorphToMany

Set the where clause for the relation query.

MorphToMany::addEagerConstraints() — Method in class MorphToMany

Set the constraints for an eager load of the relation.

MorphToMany::aliasedPivotColumns() — Method in class MorphToMany

Get the pivot columns for the relation.

Relation::addConstraints() — Method in class Relation

Set the base constraints on the relation query.

Relation::addEagerConstraints() — Method in class Relation

Set the constraints for an eager load of the relation.

Scope::apply() — Method in class Scope

Apply the scope to a given Eloquent query builder.

SoftDeletingScope::apply() — Method in class SoftDeletingScope

Apply the scope to a given Eloquent query builder.

SoftDeletingScope::addRestore() — Method in class SoftDeletingScope

Add the restore extension to the builder.

SoftDeletingScope::addWithTrashed() — Method in class SoftDeletingScope

Add the with-trashed extension to the builder.

SoftDeletingScope::addWithoutTrashed() — Method in class SoftDeletingScope

Add the without-trashed extension to the builder.

SoftDeletingScope::addOnlyTrashed() — Method in class SoftDeletingScope

Add the only-trashed extension to the builder.

MigrationCreator::afterCreate() — Method in class MigrationCreator

Register a post migration create hook.

$ Builder#aggregateProperty in class Builder

An aggregate function and column to be run.

Builder::addSelect() — Method in class Builder

Add a new select column to the query.

Builder::addArrayOfWheres() — Method in class Builder

Add an array of where clauses to the query.

Builder::addDateBasedWhere() — Method in class Builder

Add a date based (year, month, day, time) statement to the query.

Builder::addNestedWhereQuery() — Method in class Builder

Add another query builder as a nested where to the query builder.

Builder::addWhereExistsQuery() — Method in class Builder

Add an exists clause to the query.

Builder::addDynamic() — Method in class Builder

Add a single dynamic where clause statement to the query.

Builder::applyBeforeQueryCallbacks() — Method in class Builder

Invoke the "before query" modification callbacks.

Builder::avg() — Method in class Builder

Retrieve the average of the values of a given column.

Builder::average() — Method in class Builder

Alias for the "avg" method.

Builder::aggregate() — Method in class Builder

Execute an aggregate function on the database.

Builder::addBinding() — Method in class Builder
$ Blueprint#afterProperty in class Blueprint

The column to add new columns after.

Blueprint::addImpliedCommands() — Method in class Blueprint

Add the commands that are implied by the blueprint's state.

Blueprint::addFluentIndexes() — Method in class Blueprint

Add the index commands fluently specified on columns.

Blueprint::addFluentCommands() — Method in class Blueprint

Add the fluent commands specified on any columns.

Blueprint::addColumn() — Method in class Blueprint

Add a new column to the blueprint.

Blueprint::addColumnDefinition() — Method in class Blueprint

Add a new column definition to the blueprint.

Blueprint::after() — Method in class Blueprint

Add the columns from the callback after the given column.

Blueprint::addCommand() — Method in class Blueprint

Add a new command to the blueprint.

Blueprint::autoIncrementingStartingValues() — Method in class Blueprint

Get the auto-increment column starting values.

ColumnDefinition::after() — Method in class ColumnDefinition
ColumnDefinition::always() — Method in class ColumnDefinition
ColumnDefinition::autoIncrement() — Method in class ColumnDefinition
Grammar::addModifiers() — Method in class Grammar

Add the column modifiers to the definition.

SQLiteGrammar::addForeignKeys() — Method in class SQLiteGrammar

Get the foreign key syntax for a table creation statement.

SQLiteGrammar::addPrimaryKeys() — Method in class SQLiteGrammar

Get the primary key syntax for a table creation statement.

MySqlSchemaState::appendMigrationData() — Method in class MySqlSchemaState

Append the migration data to the schema dump.

SqliteSchemaState::appendMigrationData() — Method in class SqliteSchemaState

Append the migration data to the schema dump.

Dispatcher::addInterfaceListeners() — Method in class Dispatcher

Add the listeners for the event's interfaces to the given array.

AwsS3V3AdapterClass in namespace Illuminate\Filesystem
Filesystem::append() — Method in class Filesystem

Append to a file.

Filesystem::allFiles() — Method in class Filesystem

Get all of the files from the given directory (recursive).

$ FilesystemAdapter#adapterProperty in class FilesystemAdapter

The Flysystem adapter implementation.

FilesystemAdapter::assertExists() — Method in class FilesystemAdapter

Assert that the given file exists.

FilesystemAdapter::assertMissing() — Method in class FilesystemAdapter

Assert that the given file does not exist.

FilesystemAdapter::append() — Method in class FilesystemAdapter

Append to a file.

FilesystemAdapter::allFiles() — Method in class FilesystemAdapter

Get all of the files from the given directory (recursive).

FilesystemAdapter::allDirectories() — Method in class FilesystemAdapter

Get all (recursive) of the directories within a given directory.

$ FilesystemManager#appProperty in class FilesystemManager

The application instance.

AliasLoaderClass in namespace Illuminate\Foundation
$ AliasLoader#aliasesProperty in class AliasLoader

The array of class aliases.

AliasLoader::alias() — Method in class AliasLoader

Add an alias to the loader.

ApplicationClass in namespace Illuminate\Foundation
$ Application#appPathProperty in class Application

The custom application path defined by the developer.

$ Application#absoluteCachePathPrefixesProperty in class Application

The prefixes of absolute cache paths for use during normalization.

Application::afterLoadingEnvironment() — Method in class Application

Register a callback to run after loading the environment.

Application::afterBootstrapping() — Method in class Application

Register a callback to run after a bootstrapper.

Application::addAbsoluteCachePathPrefix() — Method in class Application

Add new prefix to list of absolute path prefixes.

Application::abort() — Method in class Application

Throw an HttpException with the given data.

Application::addDeferredServices() — Method in class Application

Add an array of services to the application's deferred services.

AuthorizableClass in namespace Illuminate\Foundation\Auth\Access
AuthorizesRequestsClass in namespace Illuminate\Foundation\Auth\Access
AuthorizesRequests::authorize() — Method in class AuthorizesRequests

Authorize a given action for the current user.

AuthorizesRequests::authorizeForUser() — Method in class AuthorizesRequests

Authorize a given action for a user.

AuthorizesRequests::authorizeResource() — Method in class AuthorizesRequests

Authorize a resource action based on the incoming request.

EmailVerificationRequest::authorize() — Method in class EmailVerificationRequest

Determine if the user is authorized to make this request.

$ HandleExceptions#appProperty in class HandleExceptions

The application instance.

$ PendingDispatch#afterResponseProperty in class PendingDispatch

Indicates if the job should be dispatched immediately after sending the response.

PendingDispatch::allOnConnection() — Method in class PendingDispatch

Set the desired connection for the chain.

PendingDispatch::allOnQueue() — Method in class PendingDispatch

Set the desired queue for the chain.

PendingDispatch::afterCommit() — Method in class PendingDispatch

Indicate that the job should be dispatched after all database transactions have committed.

PendingDispatch::afterResponse() — Method in class PendingDispatch

Indicate that the job should be dispatched after the response is sent to the browser.

EventListCommand::addListenersOnDispatcher() — Method in class EventListCommand

Adds the event / listeners on the dispatcher object to the given list.

EventMakeCommand::alreadyExists() — Method in class EventMakeCommand

Determine if the class already exists.

ExceptionMakeCommand::alreadyExists() — Method in class ExceptionMakeCommand

Determine if the class already exists.

$ Kernel#appProperty in class Kernel

The application implementation.

$ Kernel#artisanProperty in class Kernel

The Artisan application instance.

Kernel::all() — Method in class Kernel

Get all of the commands registered with the console.

ListenerMakeCommand::alreadyExists() — Method in class ListenerMakeCommand

Determine if the class already exists.

RouteListCommand::asJson() — Method in class RouteListCommand

Convert the given routes to JSON.

FormRequest::attributes() — Method in class FormRequest

Get custom attributes for validator errors.

$ Kernel#appProperty in class Kernel

The application implementation.

Kernel::appendMiddlewareToGroup() — Method in class Kernel

Append the given middleware to the given middleware group.

Kernel::appendToMiddlewarePriority() — Method in class Kernel

Append the given middleware to the middleware priority list.

$ PreventRequestsDuringMaintenance#appProperty in class PreventRequestsDuringMaintenance

The application implementation.

$ VerifyCsrfToken#appProperty in class VerifyCsrfToken

The application instance.

$ VerifyCsrfToken#addHttpCookieProperty in class VerifyCsrfToken

Indicates whether the XSRF-TOKEN cookie should be set on the response.

VerifyCsrfToken::addCookieToResponse() — Method in class VerifyCsrfToken

Add the CSRF token to the response cookies.

PackageManifest::aliases() — Method in class PackageManifest

Get all of the aliases for all packages.

$ ProviderRepository#appProperty in class ProviderRepository

The application implementation.

ArtisanServiceProviderClass in namespace Illuminate\Foundation\Providers
AuthServiceProviderClass in namespace Illuminate\Foundation\Support\Providers
InteractsWithAuthentication::actingAs() — Method in class InteractsWithAuthentication

Set the currently logged in user for the application.

InteractsWithAuthentication::assertAuthenticated() — Method in class InteractsWithAuthentication

Assert that the user is authenticated.

InteractsWithAuthentication::assertGuest() — Method in class InteractsWithAuthentication

Assert that the user is not authenticated.

InteractsWithAuthentication::assertAuthenticatedAs() — Method in class InteractsWithAuthentication

Assert that the user is authenticated as the given user.

InteractsWithAuthentication::assertCredentials() — Method in class InteractsWithAuthentication

Assert that the given credentials are valid.

InteractsWithAuthentication::assertInvalidCredentials() — Method in class InteractsWithAuthentication

Assert that the given credentials are invalid.

InteractsWithConsole::artisan() — Method in class InteractsWithConsole

Call artisan command and return code.

InteractsWithDatabase::assertDatabaseHas() — Method in class InteractsWithDatabase

Assert that a given where condition exists in the database.

InteractsWithDatabase::assertDatabaseMissing() — Method in class InteractsWithDatabase

Assert that a given where condition does not exist in the database.

InteractsWithDatabase::assertDatabaseCount() — Method in class InteractsWithDatabase

Assert the count of table entries.

InteractsWithDatabase::assertDeleted() — Method in class InteractsWithDatabase

Assert the given record has been deleted.

InteractsWithDatabase::assertSoftDeleted() — Method in class InteractsWithDatabase

Assert the given record has been "soft deleted".

InteractsWithDatabase::assertNotSoftDeleted() — Method in class InteractsWithDatabase

Assert the given record has not been "soft deleted".

InteractsWithDatabase::assertModelExists() — Method in class InteractsWithDatabase

Assert the given model exists in the database.

InteractsWithDatabase::assertModelMissing() — Method in class InteractsWithDatabase

Assert the given model does not exist in the database.

$ TestCase#appProperty in class TestCase

The Illuminate application instance.

$ TestCase#afterApplicationCreatedCallbacksProperty in class TestCase

The callbacks that should be run after the application is created.

TestCase::afterApplicationCreated() — Method in class TestCase

Register a callback to be run after the application is created.

AbstractHasherClass in namespace Illuminate\Hashing
Argon2IdHasherClass in namespace Illuminate\Hashing
Argon2IdHasher::algorithm() — Method in class Argon2IdHasher

Get the algorithm that should be used for hashing.

ArgonHasherClass in namespace Illuminate\Hashing
ArgonHasher::algorithm() — Method in class ArgonHasher

Get the algorithm that should be used for hashing.

Factory::assertSent() — Method in class Factory

Assert that a request / response pair was recorded matching a given truth test.

Factory::assertSentInOrder() — Method in class Factory

Assert that the given request was sent in the given order.

Factory::assertNotSent() — Method in class Factory

Assert that a request / response pair was not recorded matching a given truth test.

Factory::assertNothingSent() — Method in class Factory

Assert that no request / response pair was recorded.

Factory::assertSentCount() — Method in class Factory

Assert how many requests have been recorded.

Factory::assertSequencesAreEmpty() — Method in class Factory

Assert that every created response sequence is empty.

Factory::accept() — Method in class Factory
Factory::acceptJson() — Method in class Factory
Factory::asForm() — Method in class Factory
Factory::asJson() — Method in class Factory
Factory::asMultipart() — Method in class Factory
Factory::async() — Method in class Factory
Factory::attach() — Method in class Factory
$ PendingRequest#asyncProperty in class PendingRequest

Whether the requests should be asynchronous.

PendingRequest::asJson() — Method in class PendingRequest

Indicate the request contains JSON.

PendingRequest::asForm() — Method in class PendingRequest

Indicate the request contains form parameters.

PendingRequest::attach() — Method in class PendingRequest

Attach a file to the request.

PendingRequest::asMultipart() — Method in class PendingRequest

Indicate the request is a multi-part form request.

PendingRequest::acceptJson() — Method in class PendingRequest

Indicate that JSON should be returned by the server.

PendingRequest::accept() — Method in class PendingRequest

Indicate the type of content that should be returned by the server.

PendingRequest::async() — Method in class PendingRequest

Toggle asynchronicity in requests.

Pool::as() — Method in class Pool

Add a request to the pool with a key.

Pool::asyncRequest() — Method in class Pool

Retrieve a new async pending request.

InteractsWithContentTypes::accepts() — Method in class InteractsWithContentTypes

Determines whether the current requests accepts a given content type.

InteractsWithContentTypes::acceptsAnyContentType() — Method in class InteractsWithContentTypes

Determine if the current request accepts any content type.

InteractsWithContentTypes::acceptsJson() — Method in class InteractsWithContentTypes

Determines whether a request accepts JSON.

InteractsWithContentTypes::acceptsHtml() — Method in class InteractsWithContentTypes

Determines whether a request accepts HTML.

InteractsWithInput::anyFilled() — Method in class InteractsWithInput

Determine if the request contains a non-empty value for any of the given inputs.

InteractsWithInput::all() — Method in class InteractsWithInput

Get all of the input and files for the request.

InteractsWithInput::allFiles() — Method in class InteractsWithInput

Get an array of all of the files on the request.

$ TrustHosts#appProperty in class TrustHosts

The application instance.

TrustHosts::allSubdomainsOfApplicationUrl() — Method in class TrustHosts

Get a regular expression matching the application URL and all of its subdomains.

Request::ajax() — Method in class Request

Determine if the request is the result of an AJAX call.

ConditionallyLoadsAttributes::attributes() — Method in class ConditionallyLoadsAttributes

Merge the given attributes.

AnonymousResourceCollectionClass in namespace Illuminate\Http\Resources\Json
$ JsonResource#additionalProperty in class JsonResource

The additional meta data that should be added to the resource response.

JsonResource::additional() — Method in class JsonResource

Add additional meta data to the resource response.

$ LogManager#appProperty in class LogManager

The application instance.

LogManager::alert() — Method in class LogManager

Action must be taken immediately.

Logger::alert() — Method in class Logger

Log an alert message to the logs.

$ MailManager#appProperty in class MailManager

The application instance.

$ Mailable#attachmentsProperty in class Mailable

The attachments for the message.

$ Mailable#assertionableRenderStringsProperty in class Mailable

The rendered mailable views for testing / assertions.

Mailable::addressesToArray() — Method in class Mailable

Convert the given recipient arguments to an array.

Mailable::attach() — Method in class Mailable

Attach a file to the message.

Mailable::attachFromStorage() — Method in class Mailable

Attach a file to the message from storage.

Mailable::attachFromStorageDisk() — Method in class Mailable

Attach a file to the message from storage.

Mailable::attachData() — Method in class Mailable

Attach in-memory data as an attachment.

Mailable::assertSeeInHtml() — Method in class Mailable

Assert that the given text is present in the HTML email body.

Mailable::assertDontSeeInHtml() — Method in class Mailable

Assert that the given text is not present in the HTML email body.

Mailable::assertSeeInText() — Method in class Mailable

Assert that the given text is present in the plain-text email body.

Mailable::assertDontSeeInText() — Method in class Mailable

Assert that the given text is not present in the plain-text email body.

Mailer::alwaysFrom() — Method in class Mailer

Set the global from address and name.

Mailer::alwaysReplyTo() — Method in class Mailer

Set the global reply-to address and name.

Mailer::alwaysReturnPath() — Method in class Mailer

Set the global return path address.

Mailer::alwaysTo() — Method in class Mailer

Set the global to address and name.

Mailer::addContent() — Method in class Mailer

Add the content to a given message.

Message::addAddresses() — Method in class Message

Add a recipient to the message.

Message::attach() — Method in class Message

Attach a file to the message.

Message::attachData() — Method in class Message

Attach in-memory data as an attachment.

ArrayTransportClass in namespace Illuminate\Mail\Transport
ActionClass in namespace Illuminate\Notifications
AnonymousNotifiableClass in namespace Illuminate\Notifications
MailChannel::additionalMessageData() — Method in class MailChannel

Get additional meta-data to pass along with the view data.

MailChannel::addressMessage() — Method in class MailChannel

Address the mail message.

MailChannel::addSender() — Method in class MailChannel

Add the "from" and "reply to" addresses to the message.

MailChannel::addAttachments() — Method in class MailChannel

Add the attachments to the message.

$ MailMessage#attachmentsProperty in class MailMessage

The attachments for the message.

MailMessage::attach() — Method in class MailMessage

Attach a file to the message.

MailMessage::attachData() — Method in class MailMessage

Attach in-memory data as an attachment.

MailMessage::arrayOfAddresses() — Method in class MailMessage

Determine if the given "address" is actually an array of addresses.

$ SimpleMessage#actionTextProperty in class SimpleMessage

The text / label for the action.

$ SimpleMessage#actionUrlProperty in class SimpleMessage

The action URL.

SimpleMessage::action() — Method in class SimpleMessage

Configure the "call to action" button.

AbstractCursorPaginatorClass in namespace Illuminate\Pagination
AbstractCursorPaginator::appends() — Method in class AbstractCursorPaginator

Add a set of query string values to the paginator.

AbstractCursorPaginator::appendArray() — Method in class AbstractCursorPaginator

Add an array of query string values.

AbstractCursorPaginator::addQuery() — Method in class AbstractCursorPaginator

Add a query string value to the paginator.

AbstractPaginatorClass in namespace Illuminate\Pagination
AbstractPaginator::appends() — Method in class AbstractPaginator

Add a set of query string values to the paginator.

AbstractPaginator::appendArray() — Method in class AbstractPaginator

Add an array of query string values.

AbstractPaginator::addQuery() — Method in class AbstractPaginator

Add a query string value to the paginator.

Manager::addConnection() — Method in class Manager

Register a connection with the manager.

DatabaseFailedJobProvider::all() — Method in class DatabaseFailedJobProvider

Get a list of all of the failed jobs.

DatabaseUuidFailedJobProvider::all() — Method in class DatabaseUuidFailedJobProvider

Get a list of all of the failed jobs.

$ DynamoDbFailedJobProvider#applicationNameProperty in class DynamoDbFailedJobProvider

The application name.

DynamoDbFailedJobProvider::all() — Method in class DynamoDbFailedJobProvider

Get a list of all of the failed jobs.

FailedJobProviderInterface::all() — Method in class FailedJobProviderInterface

Get a list of all of the failed jobs.

NullFailedJobProvider::all() — Method in class NullFailedJobProvider

Get a list of all of the failed jobs.

InteractsWithQueue::attempts() — Method in class InteractsWithQueue

Get the number of times the job has been attempted.

BeanstalkdJob::attempts() — Method in class BeanstalkdJob

Get the number of times the job has been attempted.

DatabaseJob::attempts() — Method in class DatabaseJob

Get the number of times the job has been attempted.

RedisJob::attempts() — Method in class RedisJob

Get the number of times the job has been attempted.

SqsJob::attempts() — Method in class SqsJob

Get the number of times the job has been attempted.

SyncJob::attempts() — Method in class SyncJob

Get the number of times the job has been attempted.

Listener::artisanBinary() — Method in class Listener

Get the Artisan binary.

Listener::addEnvironment() — Method in class Listener

Add the environment option to the given command.

$ QueueManager#appProperty in class QueueManager

The application instance.

QueueManager::after() — Method in class QueueManager

Register an event listener for the after job event.

QueueManager::addConnector() — Method in class QueueManager

Add a queue connection resolver.

ConcurrencyLimiter::acquire() — Method in class ConcurrencyLimiter

Attempt to acquire the lock.

DurationLimiter::acquire() — Method in class DurationLimiter

Attempt to acquire the lock.

DurationLimiterBuilder::allow() — Method in class DurationLimiterBuilder

Set the maximum number of locks that can be obtained per time window.

$ RedisManager#appProperty in class RedisManager

The application instance.

AbstractRouteCollectionClass in namespace Illuminate\Routing
AbstractRouteCollection::addToSymfonyRoutesCollection() — Method in class AbstractRouteCollection

Add a route to the SymfonyRouteCollection instance.

$ CompiledRouteCollection#attributesProperty in class CompiledRouteCollection

An array of the route attributes keyed by name.

CompiledRouteCollection::add() — Method in class CompiledRouteCollection

Add a Route instance to the collection.

CreatesRegularExpressionRouteConstraints::assignExpressionToParameters() — Method in class CreatesRegularExpressionRouteConstraints

Apply the given regular expression to the given parameters.

ThrottleRequests::addHeaders() — Method in class ThrottleRequests

Add the limit header information to the given response.

Redirector::away() — Method in class Redirector

Create a new redirect response to an external URL (no validation).

Redirector::action() — Method in class Redirector

Create a new redirect response to a controller action.

ResourceRegistrar::addResourceIndex() — Method in class ResourceRegistrar

Add the index method for a resourceful route.

ResourceRegistrar::addResourceCreate() — Method in class ResourceRegistrar

Add the create method for a resourceful route.

ResourceRegistrar::addResourceStore() — Method in class ResourceRegistrar

Add the store method for a resourceful route.

ResourceRegistrar::addResourceShow() — Method in class ResourceRegistrar

Add the show method for a resourceful route.

ResourceRegistrar::addResourceEdit() — Method in class ResourceRegistrar

Add the edit method for a resourceful route.

ResourceRegistrar::addResourceUpdate() — Method in class ResourceRegistrar

Add the update method for a resourceful route.

ResourceRegistrar::addResourceDestroy() — Method in class ResourceRegistrar

Add the destroy method for a resourceful route.

$ Route#actionProperty in class Route

The route action array.

Route::allowsTrashedBindings() — Method in class Route

Determines if the route allows "trashed" models to be retrieved when resolving implicit model bindings.

Route::addGroupNamespaceToStringUses() — Method in class Route

Parse a string based action for the "uses" fluent method.

$ RouteCollection#allRoutesProperty in class RouteCollection

A flattened array of all of the routes.

$ RouteCollection#actionListProperty in class RouteCollection

A look-up table of routes by controller action.

RouteCollection::add() — Method in class RouteCollection

Add a Route instance to the collection.

RouteCollection::addToCollections() — Method in class RouteCollection

Add the given route to the arrays of routes.

RouteCollection::addLookups() — Method in class RouteCollection

Add the route to any look-up tables if necessary.

RouteCollection::addToActionList() — Method in class RouteCollection

Add a route to the controller action dictionary.

RouteCollectionInterface::add() — Method in class RouteCollectionInterface

Add a Route instance to the collection.

RouteDependencyResolverTrait::alreadyInParameters() — Method in class RouteDependencyResolverTrait

Determine if an object of the given class is in a list of parameters.

$ RouteRegistrar#attributesProperty in class RouteRegistrar

The attributes to pass on to the router.

$ RouteRegistrar#allowedAttributesProperty in class RouteRegistrar

The attributes that can be set through this class.

$ RouteRegistrar#aliasesProperty in class RouteRegistrar

The attributes that are aliased.

RouteRegistrar::attribute() — Method in class RouteRegistrar

Set the value for a given attribute.

RouteRegistrar::apiResource() — Method in class RouteRegistrar

Route an API resource to a controller.

RouteRegistrar::any() — Method in class RouteRegistrar
RouteRegistrar::as() — Method in class RouteRegistrar
RouteUrlGenerator::addPortToDomain() — Method in class RouteUrlGenerator

Add the port to the domain if necessary.

RouteUrlGenerator::addQueryString() — Method in class RouteUrlGenerator

Add a query string to the URI.

Router::any() — Method in class Router

Register a new route responding to all verbs.

Router::apiResources() — Method in class Router

Register an array of API resource controllers.

Router::apiResource() — Method in class Router

Route an API resource to a controller.

Router::addRoute() — Method in class Router

Add a route to the underlying route collection.

Router::actionReferencesController() — Method in class Router

Determine if the action is routing to a controller.

Router::addWhereClausesToRoute() — Method in class Router

Add the necessary where clauses to the route based on its initial registration.

Router::aliasMiddleware() — Method in class Router

Register a short-hand name for a middleware.

$ UrlGenerator#assetRootProperty in class UrlGenerator

The asset root URL.

UrlGenerator::asset() — Method in class UrlGenerator

Generate the URL to an application asset.

UrlGenerator::assetFrom() — Method in class UrlGenerator

Generate the URL to an asset from a custom root domain such as CDN, etc.

UrlGenerator::action() — Method in class UrlGenerator

Get the URL to a controller action.

ArraySessionHandlerClass in namespace Illuminate\Session
DatabaseSessionHandler::addUserInformation() — Method in class DatabaseSessionHandler

Add the user information to the session payload.

DatabaseSessionHandler::addRequestInformation() — Method in class DatabaseSessionHandler

Add the request information to the session payload.

AuthenticateSessionClass in namespace Illuminate\Session\Middleware
$ AuthenticateSession#authProperty in class AuthenticateSession

The authentication factory implementation.

StartSession::addCookieToResponse() — Method in class StartSession

Add the session cookie to the application response.

$ Store#attributesProperty in class Store

The session attributes.

Store::ageFlashData() — Method in class Store

Age the flash data for the session.

Store::all() — Method in class Store

Get all of the session data.

AggregateServiceProviderClass in namespace Illuminate\Support
ArrClass in namespace Illuminate\Support
Arr::accessible() — Method in class Arr

Determine whether the given value is array accessible.

Arr::add() — Method in class Arr

Add an element to an array using "dot" notation if it doesn't exist.

Collection::all() — Method in class Collection
Collection::avg() — Method in class Collection

Get the average value of a given key.

Collection::add() — Method in class Collection

Add an item to the collection.

ConfigurationUrlParser::addDriverAlias() — Method in class ConfigurationUrlParser

Add the given driver alias to the driver aliases array.

Enumerable::all() — Method in class Enumerable

Get all items in the enumerable.

Enumerable::average() — Method in class Enumerable

Alias for the "avg" method.

Enumerable::avg() — Method in class Enumerable

Get the average value of a given key.

AppClass in namespace Illuminate\Support\Facades
App::abort() — Method in class App
ArtisanClass in namespace Illuminate\Support\Facades
Artisan::all() — Method in class Artisan
AuthClass in namespace Illuminate\Support\Facades
Auth::attempt() — Method in class Auth
Blade::aliasComponent() — Method in class Blade
Blade::aliasInclude() — Method in class Blade
Broadcast::auth() — Method in class Broadcast
Bus::assertDispatched() — Method in class Bus
Bus::assertDispatchedTimes() — Method in class Bus
Bus::assertNotDispatched() — Method in class Bus
Bus::assertDispatchedAfterResponse() — Method in class Bus
Bus::assertDispatchedAfterResponseTimes() — Method in class Bus
Bus::assertNotDispatchedAfterResponse() — Method in class Bus
Bus::assertBatched() — Method in class Bus
Bus::assertChained() — Method in class Bus
Cache::add() — Method in class Cache
Config::all() — Method in class Config
DB::affectingStatement() — Method in class DB
DB::afterCommit() — Method in class DB
Event::assertDispatched() — Method in class Event
Event::assertDispatchedTimes() — Method in class Event
Event::assertNotDispatched() — Method in class Event
Event::assertNothingDispatched() — Method in class Event
Event::assertListening() — Method in class Event
$ Facade#appProperty in class Facade

The application instance being facaded.

File::allFiles() — Method in class File
File::append() — Method in class File
Gate::authorize() — Method in class Gate
Gate::after() — Method in class Gate
Gate::abilities() — Method in class Gate
Gate::allows() — Method in class Gate
Gate::any() — Method in class Gate
Http::accept() — Method in class Http
Http::acceptJson() — Method in class Http
Http::asForm() — Method in class Http
Http::asJson() — Method in class Http
Http::asMultipart() — Method in class Http
Http::async() — Method in class Http
Http::attach() — Method in class Http
Http::assertSent() — Method in class Http
Http::assertSentInOrder() — Method in class Http
Http::assertNotSent() — Method in class Http
Http::assertNothingSent() — Method in class Http
Http::assertSentCount() — Method in class Http
Http::assertSequencesAreEmpty() — Method in class Http
Log::alert() — Method in class Log
Mail::assertNotQueued() — Method in class Mail
Mail::assertNotSent() — Method in class Mail
Mail::assertNothingQueued() — Method in class Mail
Mail::assertNothingSent() — Method in class Mail
Mail::assertQueued() — Method in class Mail
Mail::assertSent() — Method in class Mail
Notification::assertNotSentTo() — Method in class Notification
Notification::assertNothingSent() — Method in class Notification
Notification::assertSentTo() — Method in class Notification
Notification::assertSentToTimes() — Method in class Notification
Notification::assertTimesSent() — Method in class Notification
Queue::assertNotPushed() — Method in class Queue
Queue::assertNothingPushed() — Method in class Queue
Queue::assertPushed() — Method in class Queue
Queue::assertPushedOn() — Method in class Queue
Queue::assertPushedWithChain() — Method in class Queue
RateLimiter::attempts() — Method in class RateLimiter
RateLimiter::availableIn() — Method in class RateLimiter
RateLimiter::attempt() — Method in class RateLimiter
Redirect::action() — Method in class Redirect
Redirect::away() — Method in class Redirect
Request::all() — Method in class Request
Request::allFiles() — Method in class Request
Request::accepts() — Method in class Request
Request::acceptsAnyContentType() — Method in class Request
Request::acceptsHtml() — Method in class Request
Request::acceptsJson() — Method in class Request
Request::ajax() — Method in class Request
Request::anyFilled() — Method in class Request
Route::apiResource() — Method in class Route
Route::any() — Method in class Route
Route::as() — Method in class Route
Route::apiResources() — Method in class Route
Session::all() — Method in class Session
Storage::assertExists() — Method in class Storage
Storage::assertMissing() — Method in class Storage
Storage::allDirectories() — Method in class Storage
Storage::allFiles() — Method in class Storage
Storage::append() — Method in class Storage
URL::action() — Method in class URL
URL::asset() — Method in class URL
View::addNamespace() — Method in class View
View::addExtension() — Method in class View
$ Fluent#attributesProperty in class Fluent

All of the attributes set on the fluent instance.

InteractsWithTime::availableAt() — Method in class InteractsWithTime

Get the "available at" UNIX timestamp.

LazyCollection::all() — Method in class LazyCollection

Get all items in the enumerable.

LazyCollection::avg() — Method in class LazyCollection

Get the average value of a given key.

MessageBag::add() — Method in class MessageBag

Add a message to the message bag.

MessageBag::addIf() — Method in class MessageBag

Add a message to the message bag if the given conditional is "true".

MessageBag::all() — Method in class MessageBag

Get all of the messages for every key in the message bag.

MessageBag::any() — Method in class MessageBag

Determine if the message bag has any messages.

$ ServiceProvider#appProperty in class ServiceProvider

The application instance.

ServiceProvider::addPublishGroup() — Method in class ServiceProvider

Add a publish group / tag to the service provider.

Str::after() — Method in class Str

Return the remainder of a string after the first occurrence of a given value.

Str::afterLast() — Method in class Str

Return the remainder of a string after the last occurrence of a given value.

Str::ascii() — Method in class Str

Transliterate a UTF-8 value to ASCII.

Stringable::after() — Method in class Stringable

Return the remainder of a string after the first occurrence of a given value.

Stringable::afterLast() — Method in class Stringable

Return the remainder of a string after the last occurrence of a given value.

Stringable::append() — Method in class Stringable

Append the given values to the string.

Stringable::ascii() — Method in class Stringable

Transliterate a UTF-8 value to ASCII.

BusFake::assertDispatched() — Method in class BusFake

Assert if a job was dispatched based on a truth-test callback.

BusFake::assertDispatchedTimes() — Method in class BusFake

Assert if a job was pushed a number of times.

BusFake::assertNotDispatched() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertDispatchedSync() — Method in class BusFake

Assert if a job was explicitly dispatched synchronously based on a truth-test callback.

BusFake::assertDispatchedSyncTimes() — Method in class BusFake

Assert if a job was pushed synchronously a number of times.

BusFake::assertNotDispatchedSync() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertDispatchedAfterResponse() — Method in class BusFake

Assert if a job was dispatched after the response was sent based on a truth-test callback.

BusFake::assertDispatchedAfterResponseTimes() — Method in class BusFake

Assert if a job was pushed after the response was sent a number of times.

BusFake::assertNotDispatchedAfterResponse() — Method in class BusFake

Determine if a job was dispatched based on a truth-test callback.

BusFake::assertChained() — Method in class BusFake

Assert if a chain of jobs was dispatched.

BusFake::assertDispatchedWithoutChain() — Method in class BusFake

Assert if a job was dispatched with an empty chain based on a truth-test callback.

BusFake::assertDispatchedWithChainOfObjects() — Method in class BusFake

Assert if a job was dispatched with chained jobs based on a truth-test callback.

BusFake::assertDispatchedWithChainOfClasses() — Method in class BusFake

Assert if a job was dispatched with chained jobs based on a truth-test callback.

BusFake::assertBatched() — Method in class BusFake

Assert if a batch was dispatched based on a truth-test callback.

EventFake::assertListening() — Method in class EventFake

Assert if an event has a listener attached to it.

EventFake::assertDispatched() — Method in class EventFake

Assert if an event was dispatched based on a truth-test callback.

EventFake::assertDispatchedTimes() — Method in class EventFake

Assert if an event was dispatched a number of times.

EventFake::assertNotDispatched() — Method in class EventFake

Determine if an event was dispatched based on a truth-test callback.

EventFake::assertNothingDispatched() — Method in class EventFake

Assert that no events were dispatched.

MailFake::assertSent() — Method in class MailFake

Assert if a mailable was sent based on a truth-test callback.

MailFake::assertSentTimes() — Method in class MailFake

Assert if a mailable was sent a number of times.

MailFake::assertNotOutgoing() — Method in class MailFake

Determine if a mailable was not sent or queued to be sent based on a truth-test callback.

MailFake::assertNotSent() — Method in class MailFake

Determine if a mailable was not sent based on a truth-test callback.

MailFake::assertNothingOutgoing() — Method in class MailFake

Assert that no mailables were sent or queued to be sent.

MailFake::assertNothingSent() — Method in class MailFake

Assert that no mailables were sent.

MailFake::assertQueued() — Method in class MailFake

Assert if a mailable was queued based on a truth-test callback.

MailFake::assertQueuedTimes() — Method in class MailFake

Assert if a mailable was queued a number of times.

MailFake::assertNotQueued() — Method in class MailFake

Determine if a mailable was not queued based on a truth-test callback.

MailFake::assertNothingQueued() — Method in class MailFake

Assert that no mailables were queued.

NotificationFake::assertSentTo() — Method in class NotificationFake

Assert if a notification was sent based on a truth-test callback.

NotificationFake::assertSentToTimes() — Method in class NotificationFake

Assert if a notification was sent a number of times.

NotificationFake::assertNotSentTo() — Method in class NotificationFake

Determine if a notification was sent based on a truth-test callback.

NotificationFake::assertNothingSent() — Method in class NotificationFake

Assert that no notifications were sent.

NotificationFake::assertTimesSent() — Method in class NotificationFake

Assert the total amount of times a notification was sent.

QueueFake::assertPushed() — Method in class QueueFake

Assert if a job was pushed based on a truth-test callback.

QueueFake::assertPushedTimes() — Method in class QueueFake

Assert if a job was pushed a number of times.

QueueFake::assertPushedOn() — Method in class QueueFake

Assert if a job was pushed based on a truth-test callback.

QueueFake::assertPushedWithChain() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertPushedWithoutChain() — Method in class QueueFake

Assert if a job was pushed with an empty chain based on a truth-test callback.

QueueFake::assertPushedWithChainOfObjects() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertPushedWithChainOfClasses() — Method in class QueueFake

Assert if a job was pushed with chained jobs based on a truth-test callback.

QueueFake::assertNotPushed() — Method in class QueueFake

Determine if a job was pushed based on a truth-test callback.

QueueFake::assertNothingPushed() — Method in class QueueFake

Assert that no jobs were pushed.

$ EnumeratesValues#averageProperty in class EnumeratesValues
$ EnumeratesValues#avgProperty in class EnumeratesValues
EnumeratesValues::average() — Method in class EnumeratesValues

Alias for the "avg" method.

ValidatedInput::all() — Method in class ValidatedInput

Get the raw, underlying input array.

ViewErrorBag::any() — Method in class ViewErrorBag

Determine if the default message bag has any messages.

AssertClass in namespace Illuminate\Testing
Assert::assertArraySubset() — Method in class Assert

Asserts that an array has a specified subset.

Assert::assertFileDoesNotExist() — Method in class Assert

Asserts that a file does not exist.

Assert::assertDirectoryDoesNotExist() — Method in class Assert

Asserts that a directory does not exist.

Assert::assertMatchesRegularExpression() — Method in class Assert

Asserts that a string matches a given regular expression.

AssertableJsonStringClass in namespace Illuminate\Testing
AssertableJsonString::assertCount() — Method in class AssertableJsonString

Assert that the response JSON has the expected count of items at the given key.

AssertableJsonString::assertExact() — Method in class AssertableJsonString

Assert that the response has the exact given JSON.

AssertableJsonString::assertSimilar() — Method in class AssertableJsonString

Assert that the response has the similar JSON as given.

AssertableJsonString::assertFragment() — Method in class AssertableJsonString

Assert that the response contains the given JSON fragment.

AssertableJsonString::assertMissing() — Method in class AssertableJsonString

Assert that the response does not contain the given JSON fragment.

AssertableJsonString::assertMissingExact() — Method in class AssertableJsonString

Assert that the response does not contain the exact JSON fragment.

AssertableJsonString::assertPath() — Method in class AssertableJsonString

Assert that the expected value and type exists at the given path in the response.

AssertableJsonString::assertStructure() — Method in class AssertableJsonString

Assert that the response has a given JSON structure.

AssertableJsonString::assertSubset() — Method in class AssertableJsonString

Assert that the response is a superset of the given JSON.

AssertableJsonString::assertJsonMessage() — Method in class AssertableJsonString

Get the assertion message for assertJson.

ArraySubsetClass in namespace Illuminate\Testing\Constraints
$ CountInDatabase#actualCountProperty in class CountInDatabase

The actual table entries count that will be checked against the expected count.

AssertableJsonClass in namespace Illuminate\Testing\Fluent
$ ParallelRunner#applicationResolverProperty in class ParallelRunner

The application resolver callback.

$ PendingCommand#appProperty in class PendingCommand

The application instance.

PendingCommand::assertExitCode() — Method in class PendingCommand

Assert that the command has the given exit code.

TestComponent::assertSee() — Method in class TestComponent

Assert that the given string is contained within the rendered component.

TestComponent::assertSeeInOrder() — Method in class TestComponent

Assert that the given strings are contained in order within the rendered component.

TestComponent::assertSeeText() — Method in class TestComponent

Assert that the given string is contained within the rendered component text.

TestComponent::assertSeeTextInOrder() — Method in class TestComponent

Assert that the given strings are contained in order within the rendered component text.

TestComponent::assertDontSee() — Method in class TestComponent

Assert that the given string is not contained within the rendered component.

TestComponent::assertDontSeeText() — Method in class TestComponent

Assert that the given string is not contained within the rendered component text.

TestResponse::assertSuccessful() — Method in class TestResponse

Assert that the response has a successful status code.

TestResponse::assertOk() — Method in class TestResponse

Assert that the response has a 200 status code.

TestResponse::assertCreated() — Method in class TestResponse

Assert that the response has a 201 status code.

TestResponse::assertNoContent() — Method in class TestResponse

Assert that the response has the given status code and no content.

TestResponse::assertNotFound() — Method in class TestResponse

Assert that the response has a not found status code.

TestResponse::assertForbidden() — Method in class TestResponse

Assert that the response has a forbidden status code.

TestResponse::assertUnauthorized() — Method in class TestResponse

Assert that the response has an unauthorized status code.

TestResponse::assertUnprocessable() — Method in class TestResponse

Assert that the response has a 422 status code.

TestResponse::assertStatus() — Method in class TestResponse

Assert that the response has the given status code.

TestResponse::assertRedirect() — Method in class TestResponse

Assert whether the response is redirecting to a given URI.

TestResponse::assertRedirectToSignedRoute() — Method in class TestResponse

Assert whether the response is redirecting to a given signed route.

TestResponse::assertHeader() — Method in class TestResponse

Asserts that the response contains the given header and equals the optional value.

TestResponse::assertHeaderMissing() — Method in class TestResponse

Asserts that the response does not contain the given header.

TestResponse::assertLocation() — Method in class TestResponse

Assert that the current location header matches the given URI.

TestResponse::assertDownload() — Method in class TestResponse

Assert that the response offers a file download.

TestResponse::assertPlainCookie() — Method in class TestResponse

Asserts that the response contains the given cookie and equals the optional value.

TestResponse::assertCookie() — Method in class TestResponse

Asserts that the response contains the given cookie and equals the optional value.

TestResponse::assertCookieExpired() — Method in class TestResponse

Asserts that the response contains the given cookie and is expired.

TestResponse::assertCookieNotExpired() — Method in class TestResponse

Asserts that the response contains the given cookie and is not expired.

TestResponse::assertCookieMissing() — Method in class TestResponse

Asserts that the response does not contain the given cookie.

TestResponse::assertSee() — Method in class TestResponse

Assert that the given string or array of strings are contained within the response.

TestResponse::assertSeeInOrder() — Method in class TestResponse

Assert that the given strings are contained in order within the response.

TestResponse::assertSeeText() — Method in class TestResponse

Assert that the given string or array of strings are contained within the response text.

TestResponse::assertSeeTextInOrder() — Method in class TestResponse

Assert that the given strings are contained in order within the response text.

TestResponse::assertDontSee() — Method in class TestResponse

Assert that the given string or array of strings are not contained within the response.

TestResponse::assertDontSeeText() — Method in class TestResponse

Assert that the given string or array of strings are not contained within the response text.

TestResponse::assertJson() — Method in class TestResponse

Assert that the response is a superset of the given JSON.

TestResponse::assertJsonPath() — Method in class TestResponse

Assert that the expected value and type exists at the given path in the response.

TestResponse::assertExactJson() — Method in class TestResponse

Assert that the response has the exact given JSON.

TestResponse::assertSimilarJson() — Method in class TestResponse

Assert that the response has the similar JSON as given.

TestResponse::assertJsonFragment() — Method in class TestResponse

Assert that the response contains the given JSON fragment.

TestResponse::assertJsonMissing() — Method in class TestResponse

Assert that the response does not contain the given JSON fragment.

TestResponse::assertJsonMissingExact() — Method in class TestResponse

Assert that the response does not contain the exact JSON fragment.

TestResponse::assertJsonStructure() — Method in class TestResponse

Assert that the response has a given JSON structure.

TestResponse::assertJsonCount() — Method in class TestResponse

Assert that the response JSON has the expected count of items at the given key.

TestResponse::assertJsonValidationErrors() — Method in class TestResponse

Assert that the response has the given JSON validation errors.

TestResponse::assertJsonMissingValidationErrors() — Method in class TestResponse

Assert that the response has no JSON validation errors for the given keys.

TestResponse::assertViewIs() — Method in class TestResponse

Assert that the response view equals the given value.

TestResponse::assertViewHas() — Method in class TestResponse

Assert that the response view has a given piece of bound data.

TestResponse::assertViewHasAll() — Method in class TestResponse

Assert that the response view has a given list of bound data.

TestResponse::assertViewMissing() — Method in class TestResponse

Assert that the response view is missing a piece of bound data.

TestResponse::assertValid() — Method in class TestResponse

Assert that the given keys do not have validation errors.

TestResponse::assertInvalid() — Method in class TestResponse

Assert that the response has the given validation errors.

TestResponse::assertSessionHas() — Method in class TestResponse

Assert that the session has a given value.

TestResponse::assertSessionHasAll() — Method in class TestResponse

Assert that the session has a given list of values.

TestResponse::assertSessionHasInput() — Method in class TestResponse

Assert that the session has a given value in the flashed input array.

TestResponse::assertSessionHasErrors() — Method in class TestResponse

Assert that the session has the given errors.

TestResponse::assertSessionDoesntHaveErrors() — Method in class TestResponse

Assert that the session is missing the given errors.

TestResponse::assertSessionHasNoErrors() — Method in class TestResponse

Assert that the session has no errors.

TestResponse::assertSessionHasErrorsIn() — Method in class TestResponse

Assert that the session has the given errors.

TestResponse::assertSessionMissing() — Method in class TestResponse

Assert that the session does not have a given key.

TestView::assertSee() — Method in class TestView

Assert that the given string is contained within the view.

TestView::assertSeeInOrder() — Method in class TestView

Assert that the given strings are contained in order within the view.

TestView::assertSeeText() — Method in class TestView

Assert that the given string is contained within the view text.

TestView::assertSeeTextInOrder() — Method in class TestView

Assert that the given strings are contained in order within the view text.

TestView::assertDontSee() — Method in class TestView

Assert that the given string is not contained within the view.

TestView::assertDontSeeText() — Method in class TestView

Assert that the given string is not contained within the view text.

ArrayLoaderClass in namespace Illuminate\Translation
ArrayLoader::addNamespace() — Method in class ArrayLoader

Add a new namespace to the loader.

ArrayLoader::addJsonPath() — Method in class ArrayLoader

Add a new JSON path to the loader.

ArrayLoader::addMessages() — Method in class ArrayLoader

Add messages to the loader.

FileLoader::addNamespace() — Method in class FileLoader

Add a new namespace to the loader.

FileLoader::addJsonPath() — Method in class FileLoader

Add a new JSON path to the loader.

Translator::addLines() — Method in class Translator

Add translation lines to the given locale.

Translator::addNamespace() — Method in class Translator

Add a new namespace to the loader.

Translator::addJsonPath() — Method in class Translator

Add a new JSON path to the loader.

ValidatesAttributes::anyFailingRequired() — Method in class ValidatesAttributes

Determine if any of the given attributes fail the required test.

ValidatesAttributes::allFailingRequired() — Method in class ValidatesAttributes

Determine if all of the given attributes fail the required test.

DatabasePresenceVerifier::addConditions() — Method in class DatabasePresenceVerifier

Add the given conditions to the query.

DatabasePresenceVerifier::addWhere() — Method in class DatabasePresenceVerifier

Add a "where" clause to the given query.

Factory::addExtensions() — Method in class Factory

Add the extensions to a validator instance.

$ Validator#afterProperty in class Validator

All of the registered "after" callbacks.

Validator::after() — Method in class Validator

Add an after validation callback.

Validator::addFailure() — Method in class Validator

Add a failed rule and error message to the collection.

Validator::attributesThatHaveMessages() — Method in class Validator

Generate an array of all attributes that have messages.

Validator::attributes() — Method in class Validator

Get the data under validation.

Validator::addRules() — Method in class Validator

Parse the given rules and merge them into current rules.

Validator::addExtensions() — Method in class Validator

Register an array of custom validator extensions.

Validator::addImplicitExtensions() — Method in class Validator

Register an array of custom implicit validator extensions.

Validator::addDependentExtensions() — Method in class Validator

Register an array of custom dependent validator extensions.

Validator::addExtension() — Method in class Validator

Register a custom validator extension.

Validator::addImplicitExtension() — Method in class Validator

Register a custom implicit validator extension.

Validator::addDependentExtension() — Method in class Validator

Register a custom dependent validator extension.

Validator::addReplacers() — Method in class Validator

Register an array of custom validator message replacers.

Validator::addReplacer() — Method in class Validator

Register a custom validator message replacer.

Validator::addCustomAttributes() — Method in class Validator

Add custom attributes to the validator.

Validator::addCustomValues() — Method in class Validator

Add the custom values for the validator.

AnonymousComponentClass in namespace Illuminate\View
AppendableAttributeValueClass in namespace Illuminate\View
BladeCompiler::appendFilePath() — Method in class BladeCompiler

Append the file path to the compiled string.

BladeCompiler::addFooters() — Method in class BladeCompiler

Add the stored footers onto the given content.

BladeCompiler::aliasComponent() — Method in class BladeCompiler

Register a component alias directive.

BladeCompiler::aliasInclude() — Method in class BladeCompiler

Register an include alias directive.

$ ComponentTagCompiler#aliasesProperty in class ComponentTagCompiler

The component class aliases.

ComponentTagCompiler::attributesToString() — Method in class ComponentTagCompiler

Convert an array of attributes to a string.

CompilesEchos::addBladeCompilerVariable() — Method in class CompilesEchos

Add an instance of the blade echo handler to the start of the compiled string.

CompilesEchos::applyEchoHandler() — Method in class CompilesEchos

Apply the echo handler for the value if it exists.

$ Component#attributesProperty in class Component

The component attributes.

$ ComponentAttributeBag#attributesProperty in class ComponentAttributeBag

The raw array of attributes.

$ ComponentSlot#attributesProperty in class ComponentSlot

The slot attribute bag.

ManagesEvents::addViewEvent() — Method in class ManagesEvents

Add an event for a given view.

ManagesEvents::addClassEvent() — Method in class ManagesEvents

Register a class based view composer.

ManagesEvents::addEventListener() — Method in class ManagesEvents

Add a listener to the event dispatcher.

ManagesLayouts::appendSection() — Method in class ManagesLayouts

Stop injecting content into a section and append it.

ManagesLoops::addLoop() — Method in class ManagesLoops

Add new loop to the stack.

Factory::addLocation() — Method in class Factory

Add a location to the array of view locations.

Factory::addNamespace() — Method in class Factory

Add a new namespace to the loader.

Factory::addExtension() — Method in class Factory

Register a valid view extension and its engine.

FileViewFinder::addLocation() — Method in class FileViewFinder

Add a location to the finder.

FileViewFinder::addNamespace() — Method in class FileViewFinder

Add a namespace hint to the finder.

FileViewFinder::addExtension() — Method in class FileViewFinder

Register an extension with the view finder.

ViewFinderInterface::addLocation() — Method in class ViewFinderInterface

Add a location to the finder.

ViewFinderInterface::addNamespace() — Method in class ViewFinderInterface

Add a namespace hint to the finder.

ViewFinderInterface::addExtension() — Method in class ViewFinderInterface

Add a valid view extension to the finder.

B

$ Gate#beforeCallbacksProperty in class Gate

All of the registered before callbacks.

Gate::buildAbilityCallback() — Method in class Gate

Create the ability callback for a callback string.

Gate::before() — Method in class Gate

Register a callback to run before all Gate checks.

ResetPassword::buildMailMessage() — Method in class ResetPassword

Get the reset password notification mail message for the given URL.

VerifyEmail::buildMailMessage() — Method in class VerifyEmail

Get the verify email notification mail message for the given URL.

$ PasswordBrokerManager#brokersProperty in class PasswordBrokerManager

The array of created "drivers".

PasswordBrokerManager::broker() — Method in class PasswordBrokerManager

Attempt to get the broker from the local cache.

SessionGuard::basic() — Method in class SessionGuard

Attempt to authenticate using HTTP Basic Auth.

SessionGuard::basicCredentials() — Method in class SessionGuard

Get the credential array for an HTTP Basic request.

BroadcastControllerClass in namespace Illuminate\Broadcasting
BroadcastEventClass in namespace Illuminate\Broadcasting
BroadcastExceptionClass in namespace Illuminate\Broadcasting
BroadcastManagerClass in namespace Illuminate\Broadcasting
BroadcastServiceProviderClass in namespace Illuminate\Broadcasting
AblyBroadcaster::broadcast() — Method in class AblyBroadcaster

Broadcast the given event.

BroadcasterClass in namespace Illuminate\Broadcasting\Broadcasters
$ Broadcaster#bindingRegistrarProperty in class Broadcaster

The binding registrar instance.

Broadcaster::binder() — Method in class Broadcaster

Get the model binding registrar instance.

LogBroadcaster::broadcast() — Method in class LogBroadcaster

Broadcast the given event.

NullBroadcaster::broadcast() — Method in class NullBroadcaster

Broadcast the given event.

PusherBroadcaster::broadcast() — Method in class PusherBroadcaster

Broadcast the given event.

RedisBroadcaster::broadcast() — Method in class RedisBroadcaster

Broadcast the given event.

RedisBroadcaster::broadcastMultipleChannelsScript() — Method in class RedisBroadcaster

Get the Lua script for broadcasting to multiple channels.

$ InteractsWithBroadcasting#broadcastConnectionProperty in class InteractsWithBroadcasting

The broadcaster connection to use to broadcast the event.

InteractsWithBroadcasting::broadcastVia() — Method in class InteractsWithBroadcasting

Broadcast the event using a specific broadcaster.

InteractsWithBroadcasting::broadcastConnections() — Method in class InteractsWithBroadcasting

Get the broadcaster connections the event should be broadcast on.

InteractsWithSockets::broadcastToEveryone() — Method in class InteractsWithSockets

Broadcast the event to everyone.

BatchClass in namespace Illuminate\Bus
BatchFactoryClass in namespace Illuminate\Bus
BatchRepositoryClass in namespace Illuminate\Bus
BatchableClass in namespace Illuminate\Bus
$ Batchable#batchIdProperty in class Batchable

The batch ID (if applicable).

Batchable::batch() — Method in class Batchable

Get the batch instance for the job, if applicable.

Batchable::batching() — Method in class Batchable

Determine if the batch is still active and processing.

BusServiceProviderClass in namespace Illuminate\Bus
Dispatcher::batch() — Method in class Dispatcher

Create a new batch of queueable jobs.

BatchDispatchedClass in namespace Illuminate\Bus\Events
$ BatchDispatched#batchProperty in class BatchDispatched

The batch instance.

Queueable::beforeCommit() — Method in class Queueable

Indicate that the job should not wait until database transactions have been committed before dispatching.

Lock::block() — Method in class Lock

Attempt to acquire the lock for the given number of seconds.

Lock::betweenBlockedAttemptsSleepFor() — Method in class Lock

Specify the number of milliseconds to sleep in between blocked lock acquisition attempts.

Limit::by() — Method in class Limit

Set the key of the rate limit.

$ Application#bootstrappersProperty in class Application

The console application bootstrappers.

Application::bootstrap() — Method in class Application

Bootstrap the console application.

BufferedConsoleOutputClass in namespace Illuminate\Console
$ BufferedConsoleOutput#bufferProperty in class BufferedConsoleOutput

The current buffer.

GeneratorCommand::buildClass() — Method in class GeneratorCommand

Build the class with the given name.

CommandBuilder::buildCommand() — Method in class CommandBuilder

Build the command for the given event.

CommandBuilder::buildForegroundCommand() — Method in class CommandBuilder

Build the command for running the event in the foreground.

CommandBuilder::buildBackgroundCommand() — Method in class CommandBuilder

Build the command for running the event in the background.

$ Event#beforeCallbacksProperty in class Event

The array of callbacks to be run before the event is started.

Event::buildCommand() — Method in class Event

Build the command string.

Event::before() — Method in class Event

Register a callback to be called before the operation.

ManagesFrequencies::between() — Method in class ManagesFrequencies

Schedule the event to run between start and end time.

BoundMethodClass in namespace Illuminate\Container
$ Container#bindingsProperty in class Container

The container's bindings.

$ Container#buildStackProperty in class Container

The stack of concretions currently being built.

$ Container#beforeResolvingCallbacksProperty in class Container

All of the before resolving callbacks by class type.

Container::bound() — Method in class Container

Determine if the given abstract type has been bound.

Container::bind() — Method in class Container

Register a binding with the container.

Container::bindMethod() — Method in class Container

Bind a callback to resolve with Container::call.

Container::bindIf() — Method in class Container

Register a binding if it hasn't already been registered.

Container::build() — Method in class Container

Instantiate a concrete instance of the given type.

Container::beforeResolving() — Method in class Container

Register a new before resolving callback for all types.

Gate::before() — Method in class Gate

Register a callback to run before all Gate checks.

PasswordBrokerFactory::broker() — Method in class PasswordBrokerFactory

Get a password broker instance by name.

SupportsBasicAuth::basic() — Method in class SupportsBasicAuth

Attempt to authenticate using HTTP Basic Auth.

BroadcasterClass in namespace Illuminate\Contracts\Broadcasting
Broadcaster::broadcast() — Method in class Broadcaster

Broadcast the given event.

HasBroadcastChannel::broadcastChannelRoute() — Method in class HasBroadcastChannel

Get the broadcast channel route definition that is associated with the given entity.

HasBroadcastChannel::broadcastChannel() — Method in class HasBroadcastChannel

Get the broadcast channel name that is associated with the given entity.

ShouldBroadcast::broadcastOn() — Method in class ShouldBroadcast

Get the channels the event should broadcast on.

QueueingDispatcher::batch() — Method in class QueueingDispatcher

Create a new batch of queueable jobs.

Lock::block() — Method in class Lock

Attempt to acquire the lock for the given number of seconds.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for artisan commands.

BindingResolutionExceptionClass in namespace Illuminate\Contracts\Container
Container::bound() — Method in class Container

Determine if the given abstract type has been bound.

Container::bind() — Method in class Container

Register a binding with the container.

Container::bindIf() — Method in class Container

Register a binding if it hasn't already been registered.

Container::beforeResolving() — Method in class Container

Register a new before resolving callback.

BuilderClass in namespace Illuminate\Contracts\Database\Query
Application::basePath() — Method in class Application

Get the base path of the Laravel installation.

Application::bootstrapPath() — Method in class Application

Get the path to the bootstrap directory.

Application::boot() — Method in class Application

Boot the application's service providers.

Application::booting() — Method in class Application

Register a new boot listener.

Application::booted() — Method in class Application

Register a new "booted" listener.

Application::bootstrapWith() — Method in class Application

Run the given array of bootstrap classes.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for HTTP requests.

Mailable::bcc() — Method in class Mailable

Set the recipients of the message.

Mailer::bcc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Queue::bulk() — Method in class Queue

Push an array of jobs onto the queue.

BindingRegistrarClass in namespace Illuminate\Contracts\Routing
BindingRegistrar::bind() — Method in class BindingRegistrar

Add a new route parameter binder.

Manager::bootEloquent() — Method in class Manager

Bootstrap Eloquent so it is ready for usage.

BuildsQueriesClass in namespace Illuminate\Database\Concerns
ManagesTransactions::beginTransaction() — Method in class ManagesTransactions

Start a new database transaction.

$ Connection#beforeExecutingCallbacksProperty in class Connection

All of the callbacks that should be invoked before a query is executed.

Connection::bindValues() — Method in class Connection

Bind values to their parameters in the given statement.

Connection::beforeExecuting() — Method in class Connection

Register a hook to be run just before a database query is executed.

ConnectionInterface::beginTransaction() — Method in class ConnectionInterface

Start a new database transaction.

SqlServerConnector::buildConnectString() — Method in class SqlServerConnector

Build a connection string from the given arguments.

SqlServerConnector::buildHostString() — Method in class SqlServerConnector

Build a host string from the given configuration.

FactoryMakeCommand::buildClass() — Method in class FactoryMakeCommand

Build the class with the given name.

BaseCommandClass in namespace Illuminate\Database\Console\Migrations
DatabaseServiceProvider::boot() — Method in class DatabaseServiceProvider

Bootstrap the application events.

DatabaseTransactionsManager::begin() — Method in class DatabaseTransactionsManager

Start a new database transaction.

BroadcastableModelEventOccurredClass in namespace Illuminate\Database\Eloquent
BroadcastableModelEventOccurred::broadcastOn() — Method in class BroadcastableModelEventOccurred

The channels the event should broadcast on.

BroadcastableModelEventOccurred::broadcastAs() — Method in class BroadcastableModelEventOccurred

The name the event should broadcast as.

BroadcastableModelEventOccurred::broadcastWith() — Method in class BroadcastableModelEventOccurred

Get the data that should be sent with the broadcasted event.

BroadcastsEventsClass in namespace Illuminate\Database\Eloquent
BroadcastsEvents::bootBroadcastsEvents() — Method in class BroadcastsEvents

Boot the event broadcasting trait.

BroadcastsEvents::broadcastCreated() — Method in class BroadcastsEvents

Broadcast that the model was created.

BroadcastsEvents::broadcastUpdated() — Method in class BroadcastsEvents

Broadcast that the model was updated.

BroadcastsEvents::broadcastTrashed() — Method in class BroadcastsEvents

Broadcast that the model was trashed.

BroadcastsEvents::broadcastRestored() — Method in class BroadcastsEvents

Broadcast that the model was restored.

BroadcastsEvents::broadcastDeleted() — Method in class BroadcastsEvents

Broadcast that the model was deleted.

BroadcastsEvents::broadcastIfBroadcastChannelsExistForEvent() — Method in class BroadcastsEvents

Broadcast the given event instance if channels are configured for the model event.

BroadcastsEvents::broadcastOn() — Method in class BroadcastsEvents

Get the channels that model events should broadcast on.

BroadcastsEvents::broadcastConnection() — Method in class BroadcastsEvents

Get the queue connection that should be used to broadcast model events.

BroadcastsEvents::broadcastQueue() — Method in class BroadcastsEvents

Get the queue that should be used to broadcast model events.

BroadcastsEvents::broadcastAfterCommit() — Method in class BroadcastsEvents

Determine if the model event broadcast queued job should be dispatched after all transactions are committed.

BuilderClass in namespace Illuminate\Database\Eloquent
HasRelationships::belongsTo() — Method in class HasRelationships

Define an inverse one-to-one or many relationship.

HasRelationships::belongsToMany() — Method in class HasRelationships

Define a many-to-many relationship.

BelongsToManyRelationshipClass in namespace Illuminate\Database\Eloquent\Factories
BelongsToRelationshipClass in namespace Illuminate\Database\Eloquent\Factories
$ HigherOrderBuilderProxy#builderProperty in class HigherOrderBuilderProxy

The collection being operated on.

$ Model#bootedProperty in class Model

The array of booted models.

Model::bootIfNotBooted() — Method in class Model

Check if the model needs to be booted and if so, do it.

Model::booting() — Method in class Model

Perform any actions required before the model boots.

Model::boot() — Method in class Model

Bootstrap the model and its traits.

Model::bootTraits() — Method in class Model

Boot all of the bootable traits on the model.

Model::booted() — Method in class Model

Perform any actions required after the model boots.

Model::broadcastChannelRoute() — Method in class Model

Get the broadcast channel route definition that is associated with the given entity.

Model::broadcastChannel() — Method in class Model

Get the broadcast channel name that is associated with the given entity.

BelongsToClass in namespace Illuminate\Database\Eloquent\Relations
BelongsToManyClass in namespace Illuminate\Database\Eloquent\Relations
BelongsToMany::buildDictionary() — Method in class BelongsToMany

Build model dictionary keyed by the relation's foreign key.

InteractsWithPivotTable::baseAttachRecord() — Method in class InteractsWithPivotTable

Create a new pivot attachment record.

HasManyThrough::buildDictionary() — Method in class HasManyThrough

Build model dictionary keyed by the relation's foreign key.

HasOneOrMany::buildDictionary() — Method in class HasOneOrMany

Build model dictionary keyed by the relation's foreign key.

MorphTo::buildDictionary() — Method in class MorphTo

Build a dictionary with the models.

MorphToMany::baseAttachRecord() — Method in class MorphToMany

Create a new pivot attachment record.

Relation::buildMorphMapFromModels() — Method in class Relation

Builds a table-keyed array from model class names.

SoftDeletes::bootSoftDeletes() — Method in class SoftDeletes

Boot the soft deleting trait for a model.

$ QueryExecuted#bindingsProperty in class QueryExecuted

The array of query bindings.

Connection::beginTransaction() — Method in class Connection

Begin a new database transaction.

SqlServerConnection::beginTransaction() — Method in class SqlServerConnection

Begin a new database transaction.

PostgresConnection::bindValues() — Method in class PostgresConnection

Bind values to their parameters in the given statement.

$ QueryException#bindingsProperty in class QueryException

The bindings for the query.

BuilderClass in namespace Illuminate\Database\Query
$ Builder#bindingsProperty in class Builder

The current query value bindings.

$ Builder#beforeQueryCallbacksProperty in class Builder

The callbacks that should be invoked before the query is executed.

Builder::beforeQuery() — Method in class Builder

Register a closure to be invoked before the query is executed.

BlueprintClass in namespace Illuminate\Database\Schema
Blueprint::build() — Method in class Blueprint

Execute the blueprint against the database.

Blueprint::bigIncrements() — Method in class Blueprint

Create a new auto-incrementing big integer (8-byte) column on the table.

Blueprint::bigInteger() — Method in class Blueprint

Create a new big integer (8-byte) column on the table.

Blueprint::boolean() — Method in class Blueprint

Create a new boolean column on the table.

Blueprint::binary() — Method in class Blueprint

Create a new binary column on the table.

BuilderClass in namespace Illuminate\Database\Schema
Builder::build() — Method in class Builder

Execute the blueprint to build / modify the table.

Builder::blueprintResolver() — Method in class Builder

Set the Schema Blueprint resolver callback.

$ ForeignIdColumnDefinition#blueprintProperty in class ForeignIdColumnDefinition

The schema builder blueprint instance.

MySqlSchemaState::baseDumpCommand() — Method in class MySqlSchemaState

Get the base dump command arguments for MySQL as a string.

MySqlSchemaState::baseVariables() — Method in class MySqlSchemaState

Get the base variables for a dump / load command.

PostgresSchemaState::baseDumpCommand() — Method in class PostgresSchemaState

Get the base dump command arguments for PostgreSQL as a string.

PostgresSchemaState::baseVariables() — Method in class PostgresSchemaState

Get the base variables for a dump / load command.

SqliteSchemaState::baseCommand() — Method in class SqliteSchemaState

Get the base sqlite command arguments as a string.

SqliteSchemaState::baseVariables() — Method in class SqliteSchemaState

Get the base variables for a dump / load command.

$ CallQueuedListener#backoffProperty in class CallQueuedListener

The number of seconds to wait before retrying a job that encountered an uncaught exception.

Dispatcher::broadcastWhen() — Method in class Dispatcher

Check if the event should be broadcasted by the condition.

Dispatcher::broadcastEvent() — Method in class Dispatcher

Broadcast the given event class.

Filesystem::basename() — Method in class Filesystem

Extract the trailing name component from a file path.

FilesystemManager::build() — Method in class FilesystemManager

Build an on-demand disk.

$ Application#basePathProperty in class Application

The base path for the Laravel installation.

$ Application#bootedProperty in class Application

Indicates if the application has "booted".

$ Application#bootingCallbacksProperty in class Application

The array of booting callbacks.

$ Application#bootedCallbacksProperty in class Application

The array of booted callbacks.

Application::bootstrapWith() — Method in class Application

Run the given array of bootstrap classes.

Application::beforeBootstrapping() — Method in class Application

Register a callback to run before a bootstrapper.

Application::bindPathsInContainer() — Method in class Application

Bind all of the application paths in the container.

Application::basePath() — Method in class Application

Get the base path of the Laravel installation.

Application::bootstrapPath() — Method in class Application

Get the path to the bootstrap directory.

Application::bound() — Method in class Application

Determine if the given abstract type has been bound.

Application::boot() — Method in class Application

Boot the application's service providers.

Application::bootProvider() — Method in class Application

Boot the given service provider.

Application::booting() — Method in class Application

Register a new boot listener.

Application::booted() — Method in class Application

Register a new "booted" listener.

BootProvidersClass in namespace Illuminate\Foundation\Bootstrap
BootProviders::bootstrap() — Method in class BootProviders

Bootstrap the given application.

HandleExceptions::bootstrap() — Method in class HandleExceptions

Bootstrap the given application.

LoadConfiguration::bootstrap() — Method in class LoadConfiguration

Bootstrap the given application.

LoadEnvironmentVariables::bootstrap() — Method in class LoadEnvironmentVariables

Bootstrap the given application.

RegisterFacades::bootstrap() — Method in class RegisterFacades

Bootstrap the given application.

RegisterProviders::bootstrap() — Method in class RegisterProviders

Bootstrap the given application.

SetRequestForConsole::bootstrap() — Method in class SetRequestForConsole

Bootstrap the given application.

PendingDispatch::beforeCommit() — Method in class PendingDispatch

Indicate that the job should not wait until database transactions have been committed before dispatching.

ChannelMakeCommand::buildClass() — Method in class ChannelMakeCommand

Build the class with the given name.

ComponentMakeCommand::buildClass() — Method in class ComponentMakeCommand

Build the class with the given name.

$ Kernel#bootstrappersProperty in class Kernel

The bootstrap classes for the application.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for artisan commands.

Kernel::bootstrappers() — Method in class Kernel

Get the bootstrap classes for the application.

ListenerMakeCommand::buildClass() — Method in class ListenerMakeCommand

Build the class with the given name.

MailMakeCommand::buildClass() — Method in class MailMakeCommand

Build the class with the given name.

NotificationMakeCommand::buildClass() — Method in class NotificationMakeCommand

Build the class with the given name.

ObserverMakeCommand::buildClass() — Method in class ObserverMakeCommand

Build the class with the given name.

PolicyMakeCommand::buildClass() — Method in class PolicyMakeCommand

Build the class with the given name.

RouteCacheCommand::buildRouteCacheFile() — Method in class RouteCacheCommand

Build the route cache file.

RuleMakeCommand::buildClass() — Method in class RuleMakeCommand

Build the class with the given name.

ViewCacheCommand::bladeFilesIn() — Method in class ViewCacheCommand

Get the Blade files in the given path.

Dispatchable::broadcast() — Method in class Dispatchable

Broadcast the event with the given arguments.

$ Kernel#bootstrappersProperty in class Kernel

The bootstrap classes for the application.

Kernel::bootstrap() — Method in class Kernel

Bootstrap the application for HTTP requests.

Kernel::bootstrappers() — Method in class Kernel

Get the bootstrap classes for the application.

PreventRequestsDuringMaintenance::bypassResponse() — Method in class PreventRequestsDuringMaintenance

Redirect the user back to the root of the application with a maintenance mode bypass cookie.

$ PackageManifest#basePathProperty in class PackageManifest

The base path.

PackageManifest::build() — Method in class PackageManifest

Build the manifest and write it to disk.

FormRequestServiceProvider::boot() — Method in class FormRequestServiceProvider

Bootstrap the application services.

FoundationServiceProvider::boot() — Method in class FoundationServiceProvider

Boot the service provider.

EventServiceProvider::boot() — Method in class EventServiceProvider

Boot any application services.

RouteServiceProvider::boot() — Method in class RouteServiceProvider

Bootstrap any application services.

InteractsWithAuthentication::be() — Method in class InteractsWithAuthentication

Set the currently logged in user for the application.

InteractsWithViews::blade() — Method in class InteractsWithViews

Render the contents of the given Blade template string.

DatabaseTransactions::beginDatabaseTransaction() — Method in class DatabaseTransactions

Handle database transactions on the specified connections.

RefreshDatabase::beginDatabaseTransaction() — Method in class RefreshDatabase

Begin a database transaction on the testing database.

$ TestCase#beforeApplicationDestroyedCallbacksProperty in class TestCase

The callbacks that should be run before the application is destroyed.

TestCase::beforeApplicationDestroyed() — Method in class TestCase

Register a callback to be run before the application is destroyed.

Wormhole::back() — Method in class Wormhole

Travel back to the current time.

BcryptHasherClass in namespace Illuminate\Hashing
Factory::baseUrl() — Method in class Factory
Factory::beforeSending() — Method in class Factory
Factory::bodyFormat() — Method in class Factory
$ PendingRequest#baseUrlProperty in class PendingRequest

The base URL for the request.

$ PendingRequest#bodyFormatProperty in class PendingRequest

The request body format.

$ PendingRequest#beforeSendingCallbacksProperty in class PendingRequest

The callbacks that should execute before the request is sent.

PendingRequest::baseUrl() — Method in class PendingRequest

Set the base URL for the pending request.

PendingRequest::bodyFormat() — Method in class PendingRequest

Specify the body format of the request.

PendingRequest::beforeSending() — Method in class PendingRequest

Add a new "before sending" callback to the request.

PendingRequest::buildClient() — Method in class PendingRequest

Build the Guzzle client.

PendingRequest::buildHandlerStack() — Method in class PendingRequest

Build the Guzzle client handler stack.

PendingRequest::buildBeforeSendingHandler() — Method in class PendingRequest

Build the before sending handler.

PendingRequest::buildRecorderHandler() — Method in class PendingRequest

Build the recorder handler.

PendingRequest::buildStubHandler() — Method in class PendingRequest

Build the stub handler.

Request::body() — Method in class Request

Get the body of the request.

Response::body() — Method in class Response

Get the body of the response.

InteractsWithInput::bearerToken() — Method in class InteractsWithInput

Get the bearer token from the request headers.

InteractsWithInput::boolean() — Method in class InteractsWithInput

Retrieve input as a boolean value.

$ Mailable#bccProperty in class Mailable

The "bcc" recipients of the message.

Mailable::buildView() — Method in class Mailable

Build the view for the message.

Mailable::buildMarkdownView() — Method in class Mailable

Build the Markdown view for the message.

Mailable::buildViewData() — Method in class Mailable

Build the view data for the message.

Mailable::buildMarkdownText() — Method in class Mailable

Build the text view for a Markdown message.

Mailable::buildFrom() — Method in class Mailable

Add the sender to the message.

Mailable::buildRecipients() — Method in class Mailable

Add all of the recipients to the message.

Mailable::buildSubject() — Method in class Mailable

Set the subject for the message.

Mailable::buildAttachments() — Method in class Mailable

Add all of the attachments to the message.

Mailable::buildDiskAttachments() — Method in class Mailable

Add all of the disk attachments to the message.

Mailable::bcc() — Method in class Mailable

Set the recipients of the message.

Mailable::buildViewDataUsing() — Method in class Mailable

Register a callback to be called while building the view data.

Mailer::bcc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Message::bcc() — Method in class Message

Add a blind carbon copy to the message.

$ PendingMail#bccProperty in class PendingMail

The "bcc" recipients of the message.

PendingMail::bcc() — Method in class PendingMail

Set the recipients of the message.

SendQueuedMailable::backoff() — Method in class SendQueuedMailable

Get the number of seconds before a released mailable will be available.

BroadcastChannelClass in namespace Illuminate\Notifications\Channels
DatabaseChannel::buildPayload() — Method in class DatabaseChannel

Build an array payload for the DatabaseNotification Model.

MailChannel::buildView() — Method in class MailChannel

Build the notification's view.

MailChannel::buildMessage() — Method in class MailChannel

Build the mail message.

BroadcastNotificationCreatedClass in namespace Illuminate\Notifications\Events
BroadcastNotificationCreated::broadcastOn() — Method in class BroadcastNotificationCreated

Get the channels the event should broadcast on.

BroadcastNotificationCreated::broadcastWith() — Method in class BroadcastNotificationCreated

Get the data that should be sent with the broadcasted event.

BroadcastNotificationCreated::broadcastType() — Method in class BroadcastNotificationCreated

Get the type of the notification being broadcast.

BroadcastMessageClass in namespace Illuminate\Notifications\Messages
$ MailMessage#bccProperty in class MailMessage

The "bcc" information for the message.

MailMessage::bcc() — Method in class MailMessage

Set the bcc address for the mail message.

Notification::broadcastOn() — Method in class Notification

Get the channels the event should broadcast on.

$ NotificationSender#busProperty in class NotificationSender

The Bus dispatcher instance.

NotificationServiceProvider::boot() — Method in class NotificationServiceProvider

Boot the application services.

SendQueuedNotifications::backoff() — Method in class SendQueuedNotifications

Get the number of seconds before a released notification will be available.

AbstractCursorPaginator::buildFragment() — Method in class AbstractCursorPaginator

Build the full fragment portion of a URL.

AbstractPaginator::buildFragment() — Method in class AbstractPaginator

Build the full fragment portion of a URL.

PaginationServiceProvider::boot() — Method in class PaginationServiceProvider

Bootstrap any application services.

BeanstalkdQueueClass in namespace Illuminate\Queue
$ BeanstalkdQueue#blockForProperty in class BeanstalkdQueue

The maximum number of seconds to block for a job.

Manager::bulk() — Method in class Manager

Push a new an array of jobs onto the queue.

BeanstalkdConnectorClass in namespace Illuminate\Queue\Connectors
BatchesTableCommandClass in namespace Illuminate\Queue\Console
DatabaseQueue::bulk() — Method in class DatabaseQueue

Push an array of jobs onto the queue.

DatabaseQueue::buildDatabaseRecord() — Method in class DatabaseQueue

Create an array to insert for the given job.

BeanstalkdJobClass in namespace Illuminate\Queue\Jobs
BeanstalkdJob::bury() — Method in class BeanstalkdJob

Bury the job in the queue.

Job::backoff() — Method in class Job

The number of seconds to wait before retrying a job that encountered an uncaught exception.

$ ThrottlesExceptions#byJobProperty in class ThrottlesExceptions

Indicates whether the throttle key should use the job's UUID.

ThrottlesExceptions::backoff() — Method in class ThrottlesExceptions

Specify the number of minutes a job should be delayed when it is released (before it has reached its max exceptions).

ThrottlesExceptions::by() — Method in class ThrottlesExceptions

Set the value that the rate limiter should be keyed by.

ThrottlesExceptions::byJob() — Method in class ThrottlesExceptions

Indicate that the throttle key should use the job's UUID.

Queue::bulk() — Method in class Queue

Push an array of jobs onto the queue.

QueueManager::before() — Method in class QueueManager

Register an event listener for the before job event.

$ RedisQueue#blockForProperty in class RedisQueue

The maximum number of seconds to block for a job.

RedisQueue::bulk() — Method in class RedisQueue

Push an array of jobs onto the queue.

$ WorkerOptions#backoffProperty in class WorkerOptions

The number of seconds to wait before retrying a job that encountered an uncaught exception.

PhpRedisConnection::blpop() — Method in class PhpRedisConnection

Removes and returns the first element of the list stored at key.

PhpRedisConnection::brpop() — Method in class PhpRedisConnection

Removes and returns the last element of the list stored at key.

PhpRedisConnector::buildClusterConnectionString() — Method in class PhpRedisConnector

Build a single cluster seed string from an array.

ConcurrencyLimiter::block() — Method in class ConcurrencyLimiter

Attempt to acquire the lock for the given number of seconds.

ConcurrencyLimiterBuilder::block() — Method in class ConcurrencyLimiterBuilder

Set the amount of time to block until a lock is available.

DurationLimiter::block() — Method in class DurationLimiter

Attempt to acquire the lock for the given number of seconds.

DurationLimiterBuilder::block() — Method in class DurationLimiterBuilder

Set the amount of time to block until a lock is available.

ControllerMakeCommand::buildClass() — Method in class ControllerMakeCommand

Build the class with the given name.

ControllerMakeCommand::buildParentReplacements() — Method in class ControllerMakeCommand

Build the replacements for a parent controller.

ControllerMakeCommand::buildModelReplacements() — Method in class ControllerMakeCommand

Build the model replacement values.

ThrottleRequests::buildException() — Method in class ThrottleRequests

Create a 'too many attempts' exception.

Redirector::back() — Method in class Redirector

Create a new redirect response to the previous location.

$ Route#bindingFieldsProperty in class Route

The fields that implicit binding should use for a given parameter.

Route::bind() — Method in class Route

Bind the route to a given request for execution.

Route::bindingFieldFor() — Method in class Route

Get the binding field for the given parameter.

Route::bindingFields() — Method in class Route

Get the binding fields for the route.

Route::block() — Method in class Route

Specify that the route should not allow concurrent requests from the same session.

RouteParameterBinder::bindPathParameters() — Method in class RouteParameterBinder

Get the parameter matches for the path portion of the URI.

RouteParameterBinder::bindHostParameters() — Method in class RouteParameterBinder

Extract the parameter list from the host part of the request.

$ RouteUri#bindingFieldsProperty in class RouteUri

The fields that should be used when resolving bindings.

$ Router#bindersProperty in class Router

The registered route value binders.

Router::bind() — Method in class Router

Add a new route parameter binder.

SessionManager::buildSession() — Method in class SessionManager

Build the session instance.

SessionManager::buildEncryptedSession() — Method in class SessionManager

Build the encrypted session instance.

SessionManager::blockDriver() — Method in class SessionManager

Get the name of the cache store / driver that should be used to acquire session locks.

App::basePath() — Method in class App
App::bootstrapPath() — Method in class App
App::boot() — Method in class App
App::booted() — Method in class App
App::booting() — Method in class App
App::bootstrapWith() — Method in class App
BladeClass in namespace Illuminate\Support\Facades
BroadcastClass in namespace Illuminate\Support\Facades
BusClass in namespace Illuminate\Support\Facades
Bus::batch() — Method in class Bus
DB::beginTransaction() — Method in class DB
DB::beforeExecuting() — Method in class DB
File::basename() — Method in class File
Gate::before() — Method in class Gate
Http::baseUrl() — Method in class Http
Http::beforeSending() — Method in class Http
Http::bodyFormat() — Method in class Http
Mail::bcc() — Method in class Mail
Password::broker() — Method in class Password
Queue::bulk() — Method in class Queue
Redirect::back() — Method in class Redirect
Request::bearerToken() — Method in class Request
Route::bind() — Method in class Route
Storage::build() — Method in class Storage
$ ServiceProvider#bootingCallbacksProperty in class ServiceProvider

All of the registered booting callbacks.

$ ServiceProvider#bootedCallbacksProperty in class ServiceProvider

All of the registered booted callbacks.

ServiceProvider::booting() — Method in class ServiceProvider

Register a booting callback to be run before the "boot" method is called.

ServiceProvider::booted() — Method in class ServiceProvider

Register a booted callback to be run after the "boot" method is called.

Str::before() — Method in class Str

Get the portion of a string before the first occurrence of a given value.

Str::beforeLast() — Method in class Str

Get the portion of a string before the last occurrence of a given value.

Str::between() — Method in class Str

Get the portion of a string between two given values.

Stringable::basename() — Method in class Stringable

Get the trailing name component of the path.

Stringable::before() — Method in class Stringable

Get the portion of a string before the first occurrence of a given value.

Stringable::beforeLast() — Method in class Stringable

Get the portion of a string before the last occurrence of a given value.

Stringable::between() — Method in class Stringable

Get the portion of a string between two given values.

BatchRepositoryFakeClass in namespace Illuminate\Support\Testing\Fakes
BusFakeClass in namespace Illuminate\Support\Testing\Fakes
$ BusFake#batchesProperty in class BusFake

The batches that have been dispatched.

BusFake::batched() — Method in class BusFake

Get all of the pending batches matching a truth-test callback.

BusFake::batch() — Method in class BusFake

Create a new batch of queueable jobs.

MailFake::bcc() — Method in class MailFake

Begin the process of mailing a mailable class instance.

$ PendingBatchFake#busProperty in class PendingBatchFake

The fake bus instance.

$ PendingChainFake#busProperty in class PendingChainFake

The fake bus instance.

QueueFake::bulk() — Method in class QueueFake

Push an array of jobs onto the queue.

$ ViewErrorBag#bagsProperty in class ViewErrorBag

The array of the view error bags.

TestDatabases::bootTestDatabase() — Method in class TestDatabases

Boot a test database.

ParallelTestingServiceProvider::boot() — Method in class ParallelTestingServiceProvider

Boot the application's service providers.

$ TestResponse#baseResponseProperty in class TestResponse

The response to delegate to.

BladeCompilerClass in namespace Illuminate\View\Compilers
$ ComponentTagCompiler#bladeProperty in class ComponentTagCompiler

The Blade compiler instance.

$ ComponentTagCompiler#boundAttributesProperty in class ComponentTagCompiler

The "bind:" attributes that have been compiled for the current component.

ManagesEvents::buildClassEventCallback() — Method in class ManagesEvents

Build a class based container callback Closure.

DynamicComponent::bindings() — Method in class DynamicComponent

Get the names of the variables that should be bound to the component.

C

$ Gate#containerProperty in class Gate

The container instance.

Gate::check() — Method in class Gate

Determine if all of the given abilities should be granted for the current user.

Gate::canBeCalledWithUser() — Method in class Gate

Determine whether the callback/method can be called with the given user.

Gate::callbackAllowsGuests() — Method in class Gate

Determine if the callback allows guests.

Gate::callAuthCallback() — Method in class Gate

Resolve and call the appropriate authorization callback.

Gate::callBeforeCallbacks() — Method in class Gate

Call all of the before callbacks and return if a result is given.

Gate::callAfterCallbacks() — Method in class Gate

Call all of the after callbacks with check result.

Gate::callPolicyBefore() — Method in class Gate

Call the "before" method on the given policy, if applicable.

Gate::callPolicyMethod() — Method in class Gate

Call the appropriate method on the given policy.

$ Response#codeProperty in class Response

The response code.

Response::code() — Method in class Response

Get the response code / reason.

$ AuthManager#customCreatorsProperty in class AuthManager

The registered custom driver creators.

AuthManager::callCustomCreator() — Method in class AuthManager

Call a custom driver creator.

AuthManager::createSessionDriver() — Method in class AuthManager

Create a session based authentication guard.

AuthManager::createTokenDriver() — Method in class AuthManager

Create a token based authentication guard.

ClearResetsCommandClass in namespace Illuminate\Auth\Console
CreatesUserProvidersClass in namespace Illuminate\Auth
$ CreatesUserProviders#customProviderCreatorsProperty in class CreatesUserProviders

The registered custom provider creators.

CreatesUserProviders::createUserProvider() — Method in class CreatesUserProviders

Create the user provider implementation for the driver.

CreatesUserProviders::createDatabaseProvider() — Method in class CreatesUserProviders

Create an instance of the database user provider.

CreatesUserProviders::createEloquentProvider() — Method in class CreatesUserProviders

Create an instance of the Eloquent user provider.

$ DatabaseUserProvider#connectionProperty in class DatabaseUserProvider

The active database connection.

EloquentUserProvider::createModel() — Method in class EloquentUserProvider

Create a new instance of the model.

$ Attempting#credentialsProperty in class Attempting

The credentials for the user.

CurrentDeviceLogoutClass in namespace Illuminate\Auth\Events
$ Failed#credentialsProperty in class Failed

The credentials provided by the attempter.

GuardHelpers::check() — Method in class GuardHelpers

Determine if the current user is authenticated.

$ ResetPassword#createUrlCallbackProperty in class ResetPassword

The callback that should be used to create the reset password URL.

ResetPassword::createUrlUsing() — Method in class ResetPassword

Set a callback that should be used when creating the reset password button URL.

$ VerifyEmail#createUrlCallbackProperty in class VerifyEmail

The callback that should be used to create the verify email URL.

VerifyEmail::createUrlUsing() — Method in class VerifyEmail

Set a callback that should be used when creating the email verification URL.

CanResetPasswordClass in namespace Illuminate\Auth\Passwords
$ DatabaseTokenRepository#connectionProperty in class DatabaseTokenRepository

The database connection instance.

DatabaseTokenRepository::create() — Method in class DatabaseTokenRepository

Create a new token record.

DatabaseTokenRepository::createNewToken() — Method in class DatabaseTokenRepository

Create a new token for the user.

PasswordBroker::createToken() — Method in class PasswordBroker

Create a new password reset token for the given user.

PasswordBrokerManager::createTokenRepository() — Method in class PasswordBrokerManager

Create a token repository instance based on the given configuration.

TokenRepositoryInterface::create() — Method in class TokenRepositoryInterface

Create a new token.

$ RequestGuard#callbackProperty in class RequestGuard

The guard callback.

$ SessionGuard#cookieProperty in class SessionGuard

The Illuminate cookie creator service.

SessionGuard::createRecaller() — Method in class SessionGuard

Create a "remember me" cookie for a given ID.

SessionGuard::clearUserDataFromStorage() — Method in class SessionGuard

Remove the user data from the session and cookies.

SessionGuard::cycleRememberToken() — Method in class SessionGuard

Refresh the "remember me" token for the user.

$ BroadcastManager#customCreatorsProperty in class BroadcastManager

The registered custom driver creators.

BroadcastManager::connection() — Method in class BroadcastManager

Get a driver instance.

BroadcastManager::callCustomCreator() — Method in class BroadcastManager

Call a custom driver creator.

BroadcastManager::createPusherDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createAblyDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createRedisDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createLogDriver() — Method in class BroadcastManager

Create an instance of the driver.

BroadcastManager::createNullDriver() — Method in class BroadcastManager

Create an instance of the driver.

$ Broadcaster#channelsProperty in class Broadcaster

The registered channel authenticators.

$ Broadcaster#channelOptionsProperty in class Broadcaster

The registered channel options.

Broadcaster::channel() — Method in class Broadcaster

Register a channel authenticator.

Broadcaster::channelNameMatchesPattern() — Method in class Broadcaster

Check if the channel name from the request matches a pattern from registered channels.

$ RedisBroadcaster#connectionProperty in class RedisBroadcaster

The Redis connection to use for broadcasting.

ChannelClass in namespace Illuminate\Broadcasting
$ Batch#createdAtProperty in class Batch

The date indicating when the batch was created.

$ Batch#cancelledAtProperty in class Batch

The date indicating when the batch was cancelled.

Batch::cancel() — Method in class Batch

Cancel the batch.

Batch::canceled() — Method in class Batch

Determine if the batch has been cancelled.

Batch::cancelled() — Method in class Batch

Determine if the batch has been cancelled.

BatchRepository::cancel() — Method in class BatchRepository

Cancel the batch that has the given ID.

$ DatabaseBatchRepository#connectionProperty in class DatabaseBatchRepository

The database connection instance.

DatabaseBatchRepository::cancel() — Method in class DatabaseBatchRepository

Cancel the batch that has the given ID.

$ Dispatcher#containerProperty in class Dispatcher

The container implementation.

Dispatcher::chain() — Method in class Dispatcher

Create a new chain of queueable jobs.

Dispatcher::commandShouldBeQueued() — Method in class Dispatcher

Determine if the given command should be queued.

$ PendingBatch#containerProperty in class PendingBatch

The IoC container instance.

PendingBatch::catch() — Method in class PendingBatch

Add a callback to be executed after the first failing job in the batch.

PendingBatch::catchCallbacks() — Method in class PendingBatch

Get the "catch" callbacks that have been registered with the pending batch.

PendingBatch::connection() — Method in class PendingBatch

Get the connection used by the pending batch.

$ Queueable#connectionProperty in class Queueable

The name of the connection the job should be sent to.

$ Queueable#chainConnectionProperty in class Queueable

The name of the connection the chain should be sent to.

$ Queueable#chainQueueProperty in class Queueable

The name of the queue the chain should be sent to.

$ Queueable#chainCatchCallbacksProperty in class Queueable

The callbacks to be executed on chain failure.

$ Queueable#chainedProperty in class Queueable

The jobs that should run if this job is successful.

Queueable::chain() — Method in class Queueable

Set the jobs that should run if this job is successful.

ArrayStore::calculateExpiration() — Method in class ArrayStore

Get the expiration time of the key.

CacheLockClass in namespace Illuminate\Cache
CacheManagerClass in namespace Illuminate\Cache
$ CacheManager#customCreatorsProperty in class CacheManager

The registered custom driver creators.

CacheManager::callCustomCreator() — Method in class CacheManager

Call a custom driver creator.

CacheManager::createApcDriver() — Method in class CacheManager

Create an instance of the APC cache driver.

CacheManager::createArrayDriver() — Method in class CacheManager

Create an instance of the array cache driver.

CacheManager::createFileDriver() — Method in class CacheManager

Create an instance of the file cache driver.

CacheManager::createMemcachedDriver() — Method in class CacheManager

Create an instance of the Memcached cache driver.

CacheManager::createNullDriver() — Method in class CacheManager

Create an instance of the Null cache driver.

CacheManager::createRedisDriver() — Method in class CacheManager

Create an instance of the Redis cache driver.

CacheManager::createDatabaseDriver() — Method in class CacheManager

Create an instance of the database cache driver.

CacheManager::createDynamodbDriver() — Method in class CacheManager

Create an instance of the DynamoDB cache driver.

CacheServiceProviderClass in namespace Illuminate\Cache
CacheTableCommandClass in namespace Illuminate\Cache\Console
$ CacheTableCommand#composerProperty in class CacheTableCommand
CacheTableCommand::createBaseMigration() — Method in class CacheTableCommand

Create a base migration file for the table.

ClearCommandClass in namespace Illuminate\Cache\Console
$ ClearCommand#cacheProperty in class ClearCommand

The cache manager instance.

ClearCommand::cache() — Method in class ClearCommand

Get the cache instance for the command.

$ ForgetCommand#cacheProperty in class ForgetCommand

The cache manager instance.

$ DatabaseLock#connectionProperty in class DatabaseLock

The database connection instance.

$ DatabaseStore#connectionProperty in class DatabaseStore

The database connection instance.

CacheEventClass in namespace Illuminate\Cache\Events
CacheHitClass in namespace Illuminate\Cache\Events
CacheMissedClass in namespace Illuminate\Cache\Events
MemcachedConnector::connect() — Method in class MemcachedConnector

Create a new Memcached connection.

MemcachedConnector::createMemcachedInstance() — Method in class MemcachedConnector

Create the Memcached instance.

MemcachedStore::calculateExpiration() — Method in class MemcachedStore

Get the expiration time of the key.

PhpRedisLock::compressed() — Method in class PhpRedisLock

Determine if compression is enabled.

$ RateLimiter#cacheProperty in class RateLimiter

The cache store implementation.

RateLimiter::clear() — Method in class RateLimiter

Clear the hits and lockout timer for the given key.

$ RedisStore#connectionProperty in class RedisStore

The Redis connection instance that should be used to manage locks.

RedisStore::connection() — Method in class RedisStore

Get the Redis connection instance.

Repository::clear() — Method in class Repository

{@inheritdoc}

$ Application#commandMapProperty in class Application

A map of command names to classes.

Application::call() — Method in class Application

Run an Artisan console command by name.

CommandClass in namespace Illuminate\Console
Command::configureUsingFluentDefinition() — Method in class Command

Configure the console command using a fluent definition.

CallsCommandsClass in namespace Illuminate\Console\Concerns
CallsCommands::call() — Method in class CallsCommands

Call another console command.

CallsCommands::callSilent() — Method in class CallsCommands

Call another console command without output.

CallsCommands::callSilently() — Method in class CallsCommands

Call another console command without output.

CallsCommands::createInputFromArguments() — Method in class CallsCommands

Create an input instance from the given arguments.

CallsCommands::context() — Method in class CallsCommands

Get all of the context passed to the command.

InteractsWithIO::confirm() — Method in class InteractsWithIO

Confirm a question with the user.

InteractsWithIO::choice() — Method in class InteractsWithIO

Give the user a single choice from an array of answers.

InteractsWithIO::comment() — Method in class InteractsWithIO

Write a string as comment output.

ConfirmableTraitClass in namespace Illuminate\Console
ConfirmableTrait::confirmToProceed() — Method in class ConfirmableTrait

Confirm before proceeding with the action.

ContainerCommandLoaderClass in namespace Illuminate\Console
$ ContainerCommandLoader#containerProperty in class ContainerCommandLoader

The container instance.

$ ContainerCommandLoader#commandMapProperty in class ContainerCommandLoader

A map of command names to classes.

CommandFinishedClass in namespace Illuminate\Console\Events
$ CommandFinished#commandProperty in class CommandFinished

The command name.

CommandStartingClass in namespace Illuminate\Console\Events
$ CommandStarting#commandProperty in class CommandStarting

The command name.

CacheAwareClass in namespace Illuminate\Console\Scheduling
CacheEventMutexClass in namespace Illuminate\Console\Scheduling
$ CacheEventMutex#cacheProperty in class CacheEventMutex

The cache repository implementation.

CacheEventMutex::create() — Method in class CacheEventMutex

Attempt to obtain an event mutex for the given event.

CacheSchedulingMutexClass in namespace Illuminate\Console\Scheduling
$ CacheSchedulingMutex#cacheProperty in class CacheSchedulingMutex

The cache factory implementation.

CacheSchedulingMutex::create() — Method in class CacheSchedulingMutex

Attempt to obtain a scheduling mutex for the given event.

CallbackEventClass in namespace Illuminate\Console\Scheduling
$ CallbackEvent#callbackProperty in class CallbackEvent

The callback to call.

CommandBuilderClass in namespace Illuminate\Console\Scheduling
$ Event#commandProperty in class Event

The command string.

Event::callBeforeCallbacks() — Method in class Event

Call all of the "before" callbacks for the event.

Event::callAfterCallbacks() — Method in class Event

Call all of the "after" callbacks for the event.

Event::callAfterCallbacksWithExitCode() — Method in class Event

Call all of the "after" callbacks for the event.

EventMutex::create() — Method in class EventMutex

Attempt to obtain an event mutex for the given event.

ManagesFrequencies::cron() — Method in class ManagesFrequencies

The Cron expression representing the event's frequency.

Schedule::call() — Method in class Schedule

Add a new callback event to the schedule.

Schedule::command() — Method in class Schedule

Add a new Artisan command event to the schedule.

Schedule::compileParameters() — Method in class Schedule

Compile parameters for a command.

Schedule::compileArrayInput() — Method in class Schedule

Compile array input for a command.

SchedulingMutex::create() — Method in class SchedulingMutex

Attempt to obtain a scheduling mutex for the given event.

BoundMethod::call() — Method in class BoundMethod

Call the given Closure / [email protected] and inject its dependencies.

BoundMethod::callClass() — Method in class BoundMethod

Call a string reference to a class using [email protected] syntax.

BoundMethod::callBoundMethod() — Method in class BoundMethod

Call a method that has been bound to the container.

ContainerClass in namespace Illuminate\Container
$ Container#contextualProperty in class Container

The contextual binding map.

Container::callMethodBinding() — Method in class Container

Get the method binding for the given method.

Container::call() — Method in class Container

Call the given Closure / [email protected] and inject its dependencies.

ContextualBindingBuilderClass in namespace Illuminate\Container
$ ContextualBindingBuilder#containerProperty in class ContextualBindingBuilder

The underlying container instance.

$ ContextualBindingBuilder#concreteProperty in class ContextualBindingBuilder

The concrete instance.

$ RewindableGenerator#countProperty in class RewindableGenerator

The number of tagged services.

RewindableGenerator::count() — Method in class RewindableGenerator

Get the total number of tagged services.

Authorizable::can() — Method in class Authorizable

Determine if the entity has a given ability.

Gate::check() — Method in class Gate

Determine if all of the given abilities should be granted for the current user.

CanResetPasswordClass in namespace Illuminate\Contracts\Auth
Guard::check() — Method in class Guard

Determine if the current user is authenticated.

Factory::connection() — Method in class Factory

Get a broadcaster implementation by name.

Application::call() — Method in class Application

Run an Artisan console command by name.

Kernel::call() — Method in class Kernel

Run an Artisan console command by name.

CircularDependencyExceptionClass in namespace Illuminate\Contracts\Container
ContainerClass in namespace Illuminate\Contracts\Container
Container::call() — Method in class Container

Call the given Closure / [email protected] and inject its dependencies.

ContextualBindingBuilderClass in namespace Illuminate\Contracts\Container
CastableClass in namespace Illuminate\Contracts\Database\Eloquent
Castable::castUsing() — Method in class Castable

Get the name of the caster class to use when casting from / to this cast target.

CastsAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
CastsInboundAttributesClass in namespace Illuminate\Contracts\Database\Eloquent
$ ModelIdentifier#classProperty in class ModelIdentifier

The class name of the model.

$ ModelIdentifier#connectionProperty in class ModelIdentifier

The connection name of the model.

Builder::crossJoin() — Method in class Builder

Add a "cross join" clause to the query.

Builder::crossJoinSub() — Method in class Builder

Add a subquery cross join to the query.

Builder::cleanBindings() — Method in class Builder

Remove all of the expressions from a list of bindings.

Builder::clone() — Method in class Builder

Clone the query.

Builder::cloneWithout() — Method in class Builder

Clone the query without the given properties.

Builder::cloneWithoutBindings() — Method in class Builder

Clone the query without the given bindings.

CloudClass in namespace Illuminate\Contracts\Filesystem
Filesystem::copy() — Method in class Filesystem

Copy a file to a new location.

Application::configPath() — Method in class Application

Get the path to the application configuration files.

CachesConfigurationClass in namespace Illuminate\Contracts\Foundation
CachesConfiguration::configurationIsCached() — Method in class CachesConfiguration

Determine if the application configuration is cached.

CachesRoutesClass in namespace Illuminate\Contracts\Foundation
Hasher::check() — Method in class Hasher

Check the given plain value against a hash.

Mailable::cc() — Method in class Mailable

Set the recipients of the message.

Factory::channel() — Method in class Factory

Get a channel instance by name.

CursorPaginatorClass in namespace Illuminate\Contracts\Pagination
CursorPaginator::cursor() — Method in class CursorPaginator

Get the current cursor being paginated.

Paginator::currentPage() — Method in class Paginator

Determine the current page being paginated.

ClearableQueueClass in namespace Illuminate\Contracts\Queue
ClearableQueue::clear() — Method in class ClearableQueue

Delete all of the jobs from the queue.

Factory::connection() — Method in class Factory

Resolve a queue connection instance.

ConnectionClass in namespace Illuminate\Contracts\Redis
Connection::command() — Method in class Connection

Run a command against the Redis database.

ConnectorClass in namespace Illuminate\Contracts\Redis
Connector::connect() — Method in class Connector

Create a connection to a Redis cluster.

Connector::connectToCluster() — Method in class Connector

Create a connection to a Redis instance.

Factory::connection() — Method in class Factory

Get a Redis connection by name.

UrlGenerator::current() — Method in class UrlGenerator

Get the current URL for the request.

Translator::choice() — Method in class Translator

Get a translation according to an integer value.

Factory::composer() — Method in class Factory

Register a view composer event.

Factory::creator() — Method in class Factory

Register a view creator event.

CookieJarClass in namespace Illuminate\Cookie
CookieServiceProviderClass in namespace Illuminate\Cookie
CookieValuePrefixClass in namespace Illuminate\Cookie
CookieValuePrefix::create() — Method in class CookieValuePrefix

Create a new cookie value prefix for the given cookie name.

$ AddQueuedCookiesToResponse#cookiesProperty in class AddQueuedCookiesToResponse

The cookie jar instance.

Manager::connection() — Method in class Manager

Get a connection instance from the global manager.

ClassMorphViolationExceptionClass in namespace Illuminate\Database
BuildsQueries::chunk() — Method in class BuildsQueries

Chunk the results of the query.

BuildsQueries::chunkMap() — Method in class BuildsQueries

Run a map over each item while chunking.

BuildsQueries::chunkById() — Method in class BuildsQueries

Chunk the results of a query by comparing IDs.

BuildsQueries::cursorPaginator() — Method in class BuildsQueries

Create a new cursor paginator instance.

ManagesTransactions::createTransaction() — Method in class ManagesTransactions

Create a transaction within the database.

ManagesTransactions::createSavepoint() — Method in class ManagesTransactions

Create a save point within the database.

ManagesTransactions::commit() — Method in class ManagesTransactions

Commit the active database transaction.

ConfigurationUrlParserClass in namespace Illuminate\Database
ConnectionClass in namespace Illuminate\Database
$ Connection#configProperty in class Connection

The database connection configuration options.

Connection::cursor() — Method in class Connection

Run a select statement against the database and returns a generator.

ConnectionInterfaceClass in namespace Illuminate\Database
ConnectionInterface::cursor() — Method in class ConnectionInterface

Run a select statement against the database and returns a generator.

ConnectionInterface::commit() — Method in class ConnectionInterface

Commit the active database transaction.

ConnectionResolverClass in namespace Illuminate\Database
$ ConnectionResolver#connectionsProperty in class ConnectionResolver

All of the registered connections.

ConnectionResolver::connection() — Method in class ConnectionResolver

Get a database connection instance.

ConnectionResolverInterfaceClass in namespace Illuminate\Database
ConnectionResolverInterface::connection() — Method in class ConnectionResolverInterface

Get a database connection instance.

ConnectionFactoryClass in namespace Illuminate\Database\Connectors
$ ConnectionFactory#containerProperty in class ConnectionFactory

The IoC container instance.

ConnectionFactory::createSingleConnection() — Method in class ConnectionFactory

Create a single database connection instance.

ConnectionFactory::createReadWriteConnection() — Method in class ConnectionFactory

Create a read / write database connection instance.

ConnectionFactory::createReadPdo() — Method in class ConnectionFactory

Create a new PDO instance for reading.

ConnectionFactory::createPdoResolver() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance.

ConnectionFactory::createPdoResolverWithHosts() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance with a specific host or an array of hosts.

ConnectionFactory::createPdoResolverWithoutHosts() — Method in class ConnectionFactory

Create a new Closure that resolves to a PDO instance where there is no configured host.

ConnectionFactory::createConnector() — Method in class ConnectionFactory

Create a connector instance based on the configuration.

ConnectionFactory::createConnection() — Method in class ConnectionFactory

Create a new connection instance.

ConnectorClass in namespace Illuminate\Database\Connectors
Connector::createConnection() — Method in class Connector

Create a new PDO connection.

Connector::createPdoConnection() — Method in class Connector

Create a new PDO connection instance.

ConnectorInterfaceClass in namespace Illuminate\Database\Connectors
ConnectorInterface::connect() — Method in class ConnectorInterface

Establish a database connection.

MySqlConnector::connect() — Method in class MySqlConnector

Establish a database connection.

MySqlConnector::configureIsolationLevel() — Method in class MySqlConnector

Set the connection transaction isolation level.

MySqlConnector::configureEncoding() — Method in class MySqlConnector

Set the connection character set and collation.

MySqlConnector::configureTimezone() — Method in class MySqlConnector

Set the timezone on the connection.

PostgresConnector::connect() — Method in class PostgresConnector

Establish a database connection.

PostgresConnector::configureEncoding() — Method in class PostgresConnector

Set the connection character set and collation.

PostgresConnector::configureTimezone() — Method in class PostgresConnector

Set the timezone on the connection.

PostgresConnector::configureSearchPath() — Method in class PostgresConnector

Set the "search_path" on the database connection.

PostgresConnector::configureApplicationName() — Method in class PostgresConnector

Set the application name on the connection.

PostgresConnector::configureSynchronousCommit() — Method in class PostgresConnector

Configure the synchronous_commit setting.

SQLiteConnector::connect() — Method in class SQLiteConnector

Establish a database connection.

SqlServerConnector::connect() — Method in class SqlServerConnector

Establish a database connection.

DbCommand::commandArguments() — Method in class DbCommand

Get the arguments for the database client command.

DbCommand::commandEnvironment() — Method in class DbCommand

Get the environment variables for the database client command.

$ MigrateMakeCommand#creatorProperty in class MigrateMakeCommand

The migration creator instance.

$ MigrateMakeCommand#composerProperty in class MigrateMakeCommand

The Composer instance.

$ DatabaseManager#connectionsProperty in class DatabaseManager

The active connection instances.

DatabaseManager::connection() — Method in class DatabaseManager

Get a database connection instance.

DatabaseManager::configuration() — Method in class DatabaseManager

Get the configuration for a connection.

DatabaseManager::configure() — Method in class DatabaseManager

Prepare the database connection instance.

$ DatabaseTransactionRecord#connectionProperty in class DatabaseTransactionRecord

The name of the database connection.

$ DatabaseTransactionRecord#callbacksProperty in class DatabaseTransactionRecord

The callbacks that should be executed after committing.

DatabaseTransactionsManager::commit() — Method in class DatabaseTransactionsManager

Commit the active database transaction.

DetectsConcurrencyErrors::causedByConcurrencyError() — Method in class DetectsConcurrencyErrors

Determine if the given exception was caused by a concurrency error such as a deadlock or serialization failure.

DetectsLostConnections::causedByLostConnection() — Method in class DetectsLostConnections

Determine if the given exception was caused by a lost connection.

$ BroadcastableModelEventOccurred#channelsProperty in class BroadcastableModelEventOccurred

The channels that the event should be broadcast on.

$ BroadcastableModelEventOccurred#connectionProperty in class BroadcastableModelEventOccurred

The queue connection that should be used to queue the broadcast job.

Builder::cursor() — Method in class Builder

Get a lazy collection for the given query.

Builder::cursorPaginate() — Method in class Builder

Paginate the given query into a cursor paginator.

Builder::create() — Method in class Builder

Save a new model and return the instance.

Builder::callScope() — Method in class Builder

Apply the given scope on the current builder instance.

Builder::callNamedScope() — Method in class Builder

Apply the given named scope on the current builder instance.

Builder::createNestedWhere() — Method in class Builder

Create a where array with nested where conditions.

Builder::createSelectWithConstraint() — Method in class Builder

Create a constraint to select the given columns for the relation.

Builder::clone() — Method in class Builder

Clone the Eloquent query builder.

ArrayObject::collect() — Method in class ArrayObject

Get a collection containing the underlying array.

AsArrayObject::castUsing() — Method in class AsArrayObject

Get the caster class to use when casting from / to this cast target.

AsCollection::castUsing() — Method in class AsCollection

Get the caster class to use when casting from / to this cast target.

AsEncryptedArrayObject::castUsing() — Method in class AsEncryptedArrayObject

Get the caster class to use when casting from / to this cast target.

AsEncryptedCollection::castUsing() — Method in class AsEncryptedCollection

Get the caster class to use when casting from / to this cast target.

CollectionClass in namespace Illuminate\Database\Eloquent
Collection::contains() — Method in class Collection

Determine if a key exists in the collection.

Collection::collapse() — Method in class Collection

Collapse the collection of items into a single array.

DecoratesQueryBuilder::crossJoin() — Method in class DecoratesQueryBuilder

{@inheritdoc}

DecoratesQueryBuilder::crossJoinSub() — Method in class DecoratesQueryBuilder

{@inheritdoc}

DecoratesQueryBuilder::cursor() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::count() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::cleanBindings() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::clone() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::cloneWithout() — Method in class DecoratesQueryBuilder
DecoratesQueryBuilder::cloneWithoutBindings() — Method in class DecoratesQueryBuilder
$ HasAttributes#changesProperty in class HasAttributes

The changed model attributes.

$ HasAttributes#castsProperty in class HasAttributes

The attributes that should be cast.

$ HasAttributes#classCastCacheProperty in class HasAttributes

The attributes that have been cast using custom classes.

HasAttributes::castAttribute() — Method in class HasAttributes

Cast an attribute to a native PHP type.

HasAttributes::castAttributeAsJson() — Method in class HasAttributes

Cast the given attribute to JSON.

HasAttributes::castAttributeAsEncryptedString() — Method in class HasAttributes

Cast the given attribute to an encrypted string.

HasAttributes::cacheMutatedAttributes() — Method in class HasAttributes

Extract and cache all the mutated attributes of a class.

HasEvents::creating() — Method in class HasEvents

Register a creating model event with the dispatcher.

HasEvents::created() — Method in class HasEvents

Register a created model event with the dispatcher.

QueriesRelationships::canUseExistsForExistenceCheck() — Method in class QueriesRelationships

Check if we can run an "exists" query to optimize performance.

BelongsToManyRelationship::createFor() — Method in class BelongsToManyRelationship

Create the attached relationship for the given model.

$ Factory#countProperty in class Factory

The number of models that should be generated.

$ Factory#connectionProperty in class Factory

The name of the database connection that will be used to create the models.

Factory::configure() — Method in class Factory

Configure the factory.

Factory::createOne() — Method in class Factory

Create a single model and persist it to the database.

Factory::createOneQuietly() — Method in class Factory

Create a single model and persist it to the database.

Factory::createMany() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::createManyQuietly() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::create() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::createQuietly() — Method in class Factory

Create a collection of models and persist them to the database.

Factory::createChildren() — Method in class Factory

Create the children for the given model.

Factory::callAfterMaking() — Method in class Factory

Call the "after making" callbacks for the given model instances.

Factory::callAfterCreating() — Method in class Factory

Call the "after creating" callbacks for the given model instances.

Factory::count() — Method in class Factory

Specify how many models should be generated.

Factory::connection() — Method in class Factory

Specify the database connection that should be used to generate models.

Relationship::createFor() — Method in class Relationship

Create the child relationship for the given parent model.

$ Sequence#countProperty in class Sequence

The count of the sequence items.

$ InvalidCastException#columnProperty in class InvalidCastException

The name of the column.

$ InvalidCastException#castTypeProperty in class InvalidCastException

The name of the cast type.

$ Model#connectionProperty in class Model

The connection name for the model.

Model::clearBootedModels() — Method in class Model

Clear the list of booted models so they will be re-booted.

Model::callNamedScope() — Method in class Model

Apply the given named scope if possible.

$ BelongsTo#childProperty in class BelongsTo

The child model instance of the relation.

BelongsToMany::cursorPaginate() — Method in class BelongsToMany

Paginate the given query into a cursor paginator.

BelongsToMany::chunk() — Method in class BelongsToMany

Chunk the results of the query.

BelongsToMany::chunkById() — Method in class BelongsToMany

Chunk the results of a query by comparing numeric IDs.

BelongsToMany::cursor() — Method in class BelongsToMany

Get a lazy collection for the given query.

BelongsToMany::create() — Method in class BelongsToMany

Create a new instance of the related model.

BelongsToMany::createMany() — Method in class BelongsToMany

Create an array of new instances of the related models.

BelongsToMany::createdAt() — Method in class BelongsToMany

Get the name of the "created at" column.

CanBeOneOfManyClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
ComparesRelatedModelsClass in namespace Illuminate\Database\Eloquent\Relations\Concerns
ComparesRelatedModels::compareKeys() — Method in class ComparesRelatedModels

Compare the parent key with the related key.

InteractsWithPivotTable::castKeys() — Method in class InteractsWithPivotTable

Cast the given keys to integers if they are numeric and string otherwise.

InteractsWithPivotTable::castKey() — Method in class InteractsWithPivotTable

Cast the given key to convert to primary key type.

InteractsWithPivotTable::castAttributes() — Method in class InteractsWithPivotTable

Cast the given pivot attributes.

HasManyThrough::chunk() — Method in class HasManyThrough

Chunk the results of the query.

HasManyThrough::chunkById() — Method in class HasManyThrough

Chunk the results of a query by comparing numeric IDs.

HasManyThrough::cursor() — Method in class HasManyThrough

Get a generator for the given query.

HasOneOrMany::create() — Method in class HasOneOrMany

Create a new instance of the related model.

HasOneOrMany::createMany() — Method in class HasOneOrMany

Create a Collection of new instances of the related model.

MorphTo::createModelByType() — Method in class MorphTo

Create a new model instance by type.

MorphTo::constrain() — Method in class MorphTo

Specify constraints on the query for a given morph type.

$ Relation#constraintsProperty in class Relation

Indicates if the relation is adding constraints.

Relation::createdAt() — Method in class Relation

Get the name of the "created at" column.

ConnectionEventClass in namespace Illuminate\Database\Events
$ ConnectionEvent#connectionNameProperty in class ConnectionEvent

The name of the connection.

$ ConnectionEvent#connectionProperty in class ConnectionEvent

The database connection instance.

$ ModelsPruned#countProperty in class ModelsPruned

The number of pruned records.

$ QueryExecuted#connectionProperty in class QueryExecuted

The database connection instance.

$ QueryExecuted#connectionNameProperty in class QueryExecuted

The database connection name.

$ SchemaDumped#connectionProperty in class SchemaDumped

The database connection instance.

$ SchemaDumped#connectionNameProperty in class SchemaDumped

The database connection name.

$ SchemaLoaded#connectionProperty in class SchemaLoaded

The database connection instance.

$ SchemaLoaded#connectionNameProperty in class SchemaLoaded

The database connection name.

$ StatementPrepared#connectionProperty in class StatementPrepared

The database connection instance.

Grammar::columnize() — Method in class Grammar

Convert an array of column names into a delimited string.

$ MigrationServiceProvider#commandsProperty in class MigrationServiceProvider

The commands to be registered.

$ DatabaseMigrationRepository#connectionProperty in class DatabaseMigrationRepository

The name of the database connection to use.

DatabaseMigrationRepository::createRepository() — Method in class DatabaseMigrationRepository

Create the migration repository data store.

$ Migration#connectionProperty in class Migration

The name of the database connection to use.

$ MigrationCreator#customStubPathProperty in class MigrationCreator

The custom app stubs directory.

MigrationCreator::create() — Method in class MigrationCreator

Create a new migration at the given path.

MigrationRepositoryInterface::createRepository() — Method in class MigrationRepositoryInterface

Create the migration repository data store.

$ Migrator#connectionProperty in class Migrator

The name of the default connection.

ConnectsToDatabaseClass in namespace Illuminate\Database\PDO\Concerns
ConnectsToDatabase::connect() — Method in class ConnectsToDatabase

Create a new database connection.

ConnectionClass in namespace Illuminate\Database\PDO
$ Connection#connectionProperty in class Connection

The underlying PDO connection.

Connection::createStatement() — Method in class Connection

Create a new statement instance.

Connection::commit() — Method in class Connection

Commit a database transaction.

$ SqlServerConnection#connectionProperty in class SqlServerConnection

The underlying connection instance.

SqlServerConnection::commit() — Method in class SqlServerConnection

Commit a database transaction.

SqlServerDriver::connect() — Method in class SqlServerDriver

Create a new database connection.

$ Builder#connectionProperty in class Builder

The database connection instance.

$ Builder#columnsProperty in class Builder

The columns that should be returned.

Builder::createSub() — Method in class Builder

Creates a subquery and parse it.

Builder::crossJoin() — Method in class Builder

Add a "cross join" clause to the query.

Builder::crossJoinSub() — Method in class Builder

Add a subquery cross join to the query.

Builder::cursorPaginate() — Method in class Builder

Get a paginator only supporting simple next and previous links.

Builder::cloneForPaginationCount() — Method in class Builder

Clone the existing query instance for usage in a pagination subquery.

Builder::cursor() — Method in class Builder

Get a lazy collection for the given query.

Builder::count() — Method in class Builder

Retrieve the "count" result of the query.

Builder::cleanBindings() — Method in class Builder
Builder::clone() — Method in class Builder
Builder::cloneWithout() — Method in class Builder
Builder::cloneWithoutBindings() — Method in class Builder
Grammar::compileSelect() — Method in class Grammar

Compile a select query into SQL.

Grammar::compileComponents() — Method in class Grammar

Compile the components necessary for a select clause.

Grammar::compileAggregate() — Method in class Grammar

Compile an aggregated select clause.

Grammar::compileColumns() — Method in class Grammar

Compile the "select *" portion of the query.

Grammar::compileFrom() — Method in class Grammar

Compile the "from" portion of the query.

Grammar::compileJoins() — Method in class Grammar

Compile the "join" portions of the query.

Grammar::compileWheres() — Method in class Grammar

Compile the "where" portions of the query.

Grammar::compileWheresToArray() — Method in class Grammar

Get an array of all the where clauses for the query.

Grammar::concatenateWhereClauses() — Method in class Grammar

Format the where clause statements into one string.

Grammar::compileJsonContains() — Method in class Grammar

Compile a "JSON contains" statement into SQL.

Grammar::compileJsonLength() — Method in class Grammar

Compile a "JSON length" statement into SQL.

Grammar::compileGroups() — Method in class Grammar

Compile the "group by" portions of the query.

Grammar::compileHavings() — Method in class Grammar

Compile the "having" portions of the query.

Grammar::compileHaving() — Method in class Grammar

Compile a single having clause.

Grammar::compileBasicHaving() — Method in class Grammar

Compile a basic having clause.

Grammar::compileHavingBetween() — Method in class Grammar

Compile a "between" having clause.

Grammar::compileHavingNull() — Method in class Grammar

Compile a having null clause.

Grammar::compileHavingNotNull() — Method in class Grammar

Compile a having not null clause.

Grammar::compileOrders() — Method in class Grammar

Compile the "order by" portions of the query.

Grammar::compileOrdersToArray() — Method in class Grammar

Compile the query orders to an array.

Grammar::compileRandom() — Method in class Grammar

Compile the random statement into SQL.

Grammar::compileLimit() — Method in class Grammar

Compile the "limit" portions of the query.

Grammar::compileOffset() — Method in class Grammar

Compile the "offset" portions of the query.

Grammar::compileUnions() — Method in class Grammar

Compile the "union" queries attached to the main query.

Grammar::compileUnion() — Method in class Grammar

Compile a single union statement.

Grammar::compileUnionAggregate() — Method in class Grammar

Compile a union aggregate query into SQL.

Grammar::compileExists() — Method in class Grammar

Compile an exists statement into SQL.

Grammar::compileInsert() — Method in class Grammar

Compile an insert statement into SQL.

Grammar::compileInsertOrIgnore() — Method in class Grammar

Compile an insert ignore statement into SQL.

Grammar::compileInsertGetId() — Method in class Grammar

Compile an insert and get ID statement into SQL.

Grammar::compileInsertUsing() — Method in class Grammar

Compile an insert statement using a subquery into SQL.

Grammar::compileUpdate() — Method in class Grammar

Compile an update statement into SQL.

Grammar::compileUpdateColumns() — Method in class Grammar

Compile the columns for an update statement.

Grammar::compileUpdateWithoutJoins() — Method in class Grammar

Compile an update statement without joins into SQL.

Grammar::compileUpdateWithJoins() — Method in class Grammar

Compile an update statement with joins into SQL.

Grammar::compileUpsert() — Method in class Grammar

Compile an "upsert" statement into SQL.

Grammar::compileDelete() — Method in class Grammar

Compile a delete statement into SQL.

Grammar::compileDeleteWithoutJoins() — Method in class Grammar

Compile a delete statement without joins into SQL.

Grammar::compileDeleteWithJoins() — Method in class Grammar

Compile a delete statement with joins into SQL.

Grammar::compileTruncate() — Method in class Grammar

Compile a truncate table statement into SQL.

Grammar::compileLock() — Method in class Grammar

Compile the lock into SQL.

Grammar::compileSavepoint() — Method in class Grammar

Compile the SQL statement to define a savepoint.

Grammar::compileSavepointRollBack() — Method in class Grammar

Compile the SQL statement to execute a savepoint rollback.

Grammar::concatenate() — Method in class Grammar

Concatenate an array of segments, removing empties.

MySqlGrammar::compileInsertOrIgnore() — Method in class MySqlGrammar

Compile an insert ignore statement into SQL.

MySqlGrammar::compileJsonContains() — Method in class MySqlGrammar

Compile a "JSON contains" statement into SQL.

MySqlGrammar::compileJsonLength() — Method in class MySqlGrammar

Compile a "JSON length" statement into SQL.

MySqlGrammar::compileRandom() — Method in class MySqlGrammar

Compile the random statement into SQL.

MySqlGrammar::compileLock() — Method in class MySqlGrammar

Compile the lock into SQL.

MySqlGrammar::compileInsert() — Method in class MySqlGrammar

Compile an insert statement into SQL.

MySqlGrammar::compileUpdateColumns() — Method in class MySqlGrammar

Compile the columns for an update statement.

MySqlGrammar::compileUpsert() — Method in class MySqlGrammar

Compile an "upsert" statement into SQL.

MySqlGrammar::compileJsonUpdateColumn() — Method in class MySqlGrammar

Prepare a JSON column being updated using the JSON_SET function.

MySqlGrammar::compileUpdateWithoutJoins() — Method in class MySqlGrammar

Compile an update statement without joins into SQL.

MySqlGrammar::compileDeleteWithoutJoins() — Method in class MySqlGrammar

Compile a delete query that does not use joins.

PostgresGrammar::compileColumns() — Method in class PostgresGrammar

Compile the "select *" portion of the query.

PostgresGrammar::compileJsonContains() — Method in class PostgresGrammar

Compile a "JSON contains" statement into SQL.

PostgresGrammar::compileJsonLength() — Method in class PostgresGrammar

Compile a "JSON length" statement into SQL.

PostgresGrammar::compileLock() — Method in class PostgresGrammar

Compile the lock into SQL.

PostgresGrammar::compileInsertOrIgnore() — Method in class PostgresGrammar

Compile an insert ignore statement into SQL.

PostgresGrammar::compileInsertGetId() — Method in class PostgresGrammar

Compile an insert and get ID statement into SQL.

PostgresGrammar::compileUpdate() — Method in class PostgresGrammar

Compile an update statement into SQL.

PostgresGrammar::compileUpdateColumns() — Method in class PostgresGrammar

Compile the columns for an update statement.

PostgresGrammar::compileUpsert() — Method in class PostgresGrammar

Compile an "upsert" statement into SQL.

PostgresGrammar::compileJsonUpdateColumn() — Method in class PostgresGrammar

Prepares a JSON column being updated using the JSONB_SET function.

PostgresGrammar::compileUpdateWithJoinsOrLimit() — Method in class PostgresGrammar

Compile an update statement with joins or limit into SQL.

PostgresGrammar::compileDelete() — Method in class PostgresGrammar

Compile a delete statement into SQL.

PostgresGrammar::compileDeleteWithJoinsOrLimit() — Method in class PostgresGrammar

Compile a delete statement with joins or limit into SQL.

PostgresGrammar::compileTruncate() — Method in class PostgresGrammar

Compile a truncate table statement into SQL.

SQLiteGrammar::compileLock() — Method in class SQLiteGrammar

Compile the lock into SQL.

SQLiteGrammar::compileJsonLength() — Method in class SQLiteGrammar

Compile a "JSON length" statement into SQL.

SQLiteGrammar::compileUpdate() — Method in class SQLiteGrammar

Compile an update statement into SQL.

SQLiteGrammar::compileInsertOrIgnore() — Method in class SQLiteGrammar

Compile an insert ignore statement into SQL.

SQLiteGrammar::compileUpdateColumns() — Method in class SQLiteGrammar

Compile the columns for an update statement.

SQLiteGrammar::compileUpsert() — Method in class SQLiteGrammar

Compile an "upsert" statement into SQL.

SQLiteGrammar::compileJsonPatch() — Method in class SQLiteGrammar

Compile a "JSON" patch statement into SQL.

SQLiteGrammar::compileUpdateWithJoinsOrLimit() — Method in class SQLiteGrammar

Compile an update statement with joins or limit into SQL.

SQLiteGrammar::compileDelete() — Method in class SQLiteGrammar

Compile a delete statement into SQL.

SQLiteGrammar::compileDeleteWithJoinsOrLimit() — Method in class SQLiteGrammar

Compile a delete statement with joins or limit into SQL.

SQLiteGrammar::compileTruncate() — Method in class SQLiteGrammar

Compile a truncate table statement into SQL.

SqlServerGrammar::compileSelect() — Method in class SqlServerGrammar

Compile a select query into SQL.

SqlServerGrammar::compileColumns() — Method in class SqlServerGrammar

Compile the "select *" portion of the query.

SqlServerGrammar::compileFrom() — Method in class SqlServerGrammar

Compile the "from" portion of the query.

SqlServerGrammar::compileJsonContains() — Method in class SqlServerGrammar

Compile a "JSON contains" statement into SQL.

SqlServerGrammar::compileJsonLength() — Method in class SqlServerGrammar

Compile a "JSON length" statement into SQL.

SqlServerGrammar::compileAnsiOffset() — Method in class SqlServerGrammar

Create a full ANSI offset clause for the query.

SqlServerGrammar::compileOver() — Method in class SqlServerGrammar

Compile the over statement for a table expression.

SqlServerGrammar::compileTableExpression() — Method in class SqlServerGrammar

Compile a common table expression for a query.

SqlServerGrammar::compileRowConstraint() — Method in class SqlServerGrammar

Compile the limit / offset row constraint for a query.

SqlServerGrammar::compileDeleteWithoutJoins() — Method in class SqlServerGrammar

Compile a delete statement without joins into SQL.

SqlServerGrammar::compileRandom() — Method in class SqlServerGrammar

Compile the random statement into SQL.

SqlServerGrammar::compileLimit() — Method in class SqlServerGrammar

Compile the "limit" portions of the query.

SqlServerGrammar::compileOffset() — Method in class SqlServerGrammar

Compile the "offset" portions of the query.

SqlServerGrammar::compileLock() — Method in class SqlServerGrammar

Compile the lock into SQL.

SqlServerGrammar::compileExists() — Method in class SqlServerGrammar

Compile an exists statement into SQL.

SqlServerGrammar::compileUpdateWithJoins() — Method in class SqlServerGrammar

Compile an update statement with joins into SQL.

SqlServerGrammar::compileUpsert() — Method in class SqlServerGrammar

Compile an "upsert" statement into SQL.

SqlServerGrammar::compileSavepoint() — Method in class SqlServerGrammar

Compile the SQL statement to define a savepoint.

SqlServerGrammar::compileSavepointRollBack() — Method in class SqlServerGrammar

Compile the SQL statement to execute a savepoint rollback.

$ Blueprint#columnsProperty in class Blueprint

The columns that should be added to the table.

$ Blueprint#commandsProperty in class Blueprint

The commands that should be run for the table.

$ Blueprint#charsetProperty in class Blueprint

The default character set that should be used for the table.

$ Blueprint#collationProperty in class Blueprint

The collation that should be used for the table.

Blueprint::commandsNamed() — Method in class Blueprint

Get all of the commands matching the given names.

Blueprint::creating() — Method in class Blueprint

Determine if the blueprint has a create command.

Blueprint::create() — Method in class Blueprint

Indicate that the table needs to be created.

Blueprint::char() — Method in class Blueprint

Create a new char column on the table.

Blueprint::computed() — Method in class Blueprint

Create a new generated, computed column on the table.

Blueprint::createIndexName() — Method in class Blueprint

Create a default index name for the table.

Blueprint::createCommand() — Method in class Blueprint

Create a new Fluent command.

$ Builder#connectionProperty in class Builder

The database connection instance.

Builder::createDatabase() — Method in class Builder

Create a database in the schema.

Builder::create() — Method in class Builder

Create a new table on the schema.

Builder::createBlueprint() — Method in class Builder

Create a new command set with a Closure.

ColumnDefinitionClass in namespace Illuminate\Database\Schema
ColumnDefinition::change() — Method in class ColumnDefinition

Change the column

ColumnDefinition::charset() — Method in class ColumnDefinition
ColumnDefinition::collation() — Method in class ColumnDefinition
ColumnDefinition::comment() — Method in class ColumnDefinition
ForeignIdColumnDefinition::constrained() — Method in class ForeignIdColumnDefinition

Create a foreign key constraint on this column referencing the "id" column of the conventionally related table.

ForeignKeyDefinition::cascadeOnUpdate() — Method in class ForeignKeyDefinition

Indicate that updates should cascade.

ForeignKeyDefinition::cascadeOnDelete() — Method in class ForeignKeyDefinition

Indicate that deletes should cascade.

ChangeColumnClass in namespace Illuminate\Database\Schema\Grammars
ChangeColumn::compile() — Method in class ChangeColumn

Compile a change column command into a series of SQL statements.

ChangeColumn::calculateDoctrineTextLength() — Method in class ChangeColumn

Calculate the proper column length to force the Doctrine text type.

Grammar::compileCreateDatabase() — Method in class Grammar

Compile a create database command.

Grammar::compileDropDatabaseIfExists() — Method in class Grammar

Compile a drop database if exists command.

Grammar::compileRenameColumn() — Method in class Grammar

Compile a rename column command.

Grammar::compileChange() — Method in class Grammar

Compile a change column command into a series of SQL statements.

Grammar::compileForeign() — Method in class Grammar

Compile a foreign key command.

MySqlGrammar::compileCreateDatabase() — Method in class MySqlGrammar

Compile a create database command.

MySqlGrammar::compileDropDatabaseIfExists() — Method in class MySqlGrammar

Compile a drop database if exists command.

MySqlGrammar::compileTableExists() — Method in class MySqlGrammar

Compile the query to determine the list of tables.

MySqlGrammar::compileColumnListing() — Method in class MySqlGrammar

Compile the query to determine the list of columns.

MySqlGrammar::compileCreate() — Method in class MySqlGrammar

Compile a create table command.

MySqlGrammar::compileCreateTable() — Method in class MySqlGrammar

Create the main create table clause.

MySqlGrammar::compileCreateEncoding() — Method in class MySqlGrammar

Append the character set specifications to a command.

MySqlGrammar::compileCreateEngine() — Method in class MySqlGrammar

Append the engine specifications to a command.

MySqlGrammar::compileAdd() — Method in class MySqlGrammar

Compile an add column command.

MySqlGrammar::compileAutoIncrementStartingValues() — Method in class MySqlGrammar

Compile the auto-incrementing column starting values.

MySqlGrammar::compilePrimary() — Method in class MySqlGrammar

Compile a primary key command.

MySqlGrammar::compileUnique() — Method in class MySqlGrammar

Compile a unique key command.

MySqlGrammar::compileIndex() — Method in class MySqlGrammar

Compile a plain index key command.

MySqlGrammar::compileSpatialIndex() — Method in class MySqlGrammar

Compile a spatial index key command.

MySqlGrammar::compileKey() — Method in class MySqlGrammar

Compile an index creation command.

MySqlGrammar::compileDrop() — Method in class MySqlGrammar

Compile a drop table command.

MySqlGrammar::compileDropIfExists() — Method in class MySqlGrammar

Compile a drop table (if exists) command.

MySqlGrammar::compileDropColumn() — Method in class MySqlGrammar

Compile a drop column command.

MySqlGrammar::compileDropPrimary() — Method in class MySqlGrammar

Compile a drop primary key command.

MySqlGrammar::compileDropUnique() — Method in class MySqlGrammar

Compile a drop unique key command.

MySqlGrammar::compileDropIndex() — Method in class MySqlGrammar

Compile a drop index command.

MySqlGrammar::compileDropSpatialIndex() — Method in class MySqlGrammar

Compile a drop spatial index command.

MySqlGrammar::compileDropForeign() — Method in class MySqlGrammar

Compile a drop foreign key command.

MySqlGrammar::compileRename() — Method in class MySqlGrammar

Compile a rename table command.

MySqlGrammar::compileRenameIndex() — Method in class MySqlGrammar

Compile a rename index command.

MySqlGrammar::compileDropAllTables() — Method in class MySqlGrammar

Compile the SQL needed to drop all tables.

MySqlGrammar::compileDropAllViews() — Method in class MySqlGrammar

Compile the SQL needed to drop all views.

MySqlGrammar::compileGetAllTables() — Method in class MySqlGrammar

Compile the SQL needed to retrieve all table names.

MySqlGrammar::compileGetAllViews() — Method in class MySqlGrammar

Compile the SQL needed to retrieve all view names.

MySqlGrammar::compileEnableForeignKeyConstraints() — Method in class MySqlGrammar

Compile the command to enable foreign key constraints.

MySqlGrammar::compileDisableForeignKeyConstraints() — Method in class MySqlGrammar

Compile the command to disable foreign key constraints.

PostgresGrammar::compileCreateDatabase() — Method in class PostgresGrammar

Compile a create database command.

PostgresGrammar::compileDropDatabaseIfExists() — Method in class PostgresGrammar

Compile a drop database if exists command.

PostgresGrammar::compileTableExists() — Method in class PostgresGrammar

Compile the query to determine if a table exists.

PostgresGrammar::compileColumnListing() — Method in class PostgresGrammar

Compile the query to determine the list of columns.

PostgresGrammar::compileCreate() — Method in class PostgresGrammar

Compile a create table command.

PostgresGrammar::compileAdd() — Method in class PostgresGrammar

Compile a column addition command.

PostgresGrammar::compileAutoIncrementStartingValues() — Method in class PostgresGrammar

Compile the auto-incrementing column starting values.

PostgresGrammar::compilePrimary() — Method in class PostgresGrammar

Compile a primary key command.

PostgresGrammar::compileUnique() — Method in class PostgresGrammar

Compile a unique key command.

PostgresGrammar::compileIndex() — Method in class PostgresGrammar

Compile a plain index key command.

PostgresGrammar::compileSpatialIndex() — Method in class PostgresGrammar

Compile a spatial index key command.

PostgresGrammar::compileForeign() — Method in class PostgresGrammar

Compile a foreign key command.

PostgresGrammar::compileDrop() — Method in class PostgresGrammar

Compile a drop table command.

PostgresGrammar::compileDropIfExists() — Method in class PostgresGrammar

Compile a drop table (if exists) command.

PostgresGrammar::compileDropAllTables() — Method in class PostgresGrammar

Compile the SQL needed to drop all tables.

PostgresGrammar::compileDropAllViews() — Method in class PostgresGrammar

Compile the SQL needed to drop all views.

PostgresGrammar::compileDropAllTypes() — Method in class PostgresGrammar

Compile the SQL needed to drop all types.

PostgresGrammar::compileGetAllTables() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all table names.

PostgresGrammar::compileGetAllViews() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all view names.

PostgresGrammar::compileGetAllTypes() — Method in class PostgresGrammar

Compile the SQL needed to retrieve all type names.

PostgresGrammar::compileDropColumn() — Method in class PostgresGrammar

Compile a drop column command.

PostgresGrammar::compileDropPrimary() — Method in class PostgresGrammar

Compile a drop primary key command.

PostgresGrammar::compileDropUnique() — Method in class PostgresGrammar

Compile a drop unique key command.

PostgresGrammar::compileDropIndex() — Method in class PostgresGrammar

Compile a drop index command.

PostgresGrammar::compileDropSpatialIndex() — Method in class PostgresGrammar

Compile a drop spatial index command.

PostgresGrammar::compileDropForeign() — Method in class PostgresGrammar

Compile a drop foreign key command.

PostgresGrammar::compileRename() — Method in class PostgresGrammar

Compile a rename table command.

PostgresGrammar::compileRenameIndex() — Method in class PostgresGrammar

Compile a rename index command.

PostgresGrammar::compileEnableForeignKeyConstraints() — Method in class PostgresGrammar

Compile the command to enable foreign key constraints.

PostgresGrammar::compileDisableForeignKeyConstraints() — Method in class PostgresGrammar

Compile the command to disable foreign key constraints.

PostgresGrammar::compileComment() — Method in class PostgresGrammar

Compile a comment command.

RenameColumn::compile() — Method in class RenameColumn

Compile a rename column command.

SQLiteGrammar::compileTableExists() — Method in class SQLiteGrammar

Compile the query to determine if a table exists.

SQLiteGrammar::compileColumnListing() — Method in class SQLiteGrammar

Compile the query to determine the list of columns.

SQLiteGrammar::compileCreate() — Method in class SQLiteGrammar

Compile a create table command.

SQLiteGrammar::compileAdd() — Method in class SQLiteGrammar

Compile alter table commands for adding columns.

SQLiteGrammar::compileUnique() — Method in class SQLiteGrammar

Compile a unique key command.

SQLiteGrammar::compileIndex() — Method in class SQLiteGrammar

Compile a plain index key command.

SQLiteGrammar::compileSpatialIndex() — Method in class SQLiteGrammar

Compile a spatial index key command.

SQLiteGrammar::compileForeign() — Method in class SQLiteGrammar

Compile a foreign key command.

SQLiteGrammar::compileDrop() — Method in class SQLiteGrammar

Compile a drop table command.

SQLiteGrammar::compileDropIfExists() — Method in class SQLiteGrammar

Compile a drop table (if exists) command.

SQLiteGrammar::compileDropAllTables() — Method in class SQLiteGrammar

Compile the SQL needed to drop all tables.

SQLiteGrammar::compileDropAllViews() — Method in class SQLiteGrammar

Compile the SQL needed to drop all views.

SQLiteGrammar::compileRebuild() — Method in class SQLiteGrammar

Compile the SQL needed to rebuild the database.

SQLiteGrammar::compileDropColumn() — Method in class SQLiteGrammar

Compile a drop column command.

SQLiteGrammar::compileDropUnique() — Method in class SQLiteGrammar

Compile a drop unique key command.

SQLiteGrammar::compileDropIndex() — Method in class SQLiteGrammar

Compile a drop index command.

SQLiteGrammar::compileDropSpatialIndex() — Method in class SQLiteGrammar

Compile a drop spatial index command.

SQLiteGrammar::compileRename() — Method in class SQLiteGrammar

Compile a rename table command.

SQLiteGrammar::compileRenameIndex() — Method in class SQLiteGrammar

Compile a rename index command.

SQLiteGrammar::compileEnableForeignKeyConstraints() — Method in class SQLiteGrammar

Compile the command to enable foreign key constraints.

SQLiteGrammar::compileDisableForeignKeyConstraints() — Method in class SQLiteGrammar

Compile the command to disable foreign key constraints.

SQLiteGrammar::compileEnableWriteableSchema() — Method in class SQLiteGrammar

Compile the SQL needed to enable a writable schema.

SQLiteGrammar::compileDisableWriteableSchema() — Method in class SQLiteGrammar

Compile the SQL needed to disable a writable schema.

SqlServerGrammar::compileCreateDatabase() — Method in class SqlServerGrammar

Compile a create database command.

SqlServerGrammar::compileDropDatabaseIfExists() — Method in class SqlServerGrammar

Compile a drop database if exists command.

SqlServerGrammar::compileTableExists() — Method in class SqlServerGrammar

Compile the query to determine if a table exists.

SqlServerGrammar::compileColumnListing() — Method in class SqlServerGrammar

Compile the query to determine the list of columns.

SqlServerGrammar::compileCreate() — Method in class SqlServerGrammar

Compile a create table command.

SqlServerGrammar::compileAdd() — Method in class SqlServerGrammar

Compile a column addition table command.

SqlServerGrammar::compilePrimary() — Method in class SqlServerGrammar

Compile a primary key command.

SqlServerGrammar::compileUnique() — Method in class SqlServerGrammar

Compile a unique key command.

SqlServerGrammar::compileIndex() — Method in class SqlServerGrammar

Compile a plain index key command.

SqlServerGrammar::compileSpatialIndex() — Method in class SqlServerGrammar

Compile a spatial index key command.

SqlServerGrammar::compileDrop() — Method in class SqlServerGrammar

Compile a drop table command.

SqlServerGrammar::compileDropIfExists() — Method in class SqlServerGrammar

Compile a drop table (if exists) command.

SqlServerGrammar::compileDropAllTables() — Method in class SqlServerGrammar

Compile the SQL needed to drop all tables.

SqlServerGrammar::compileDropColumn() — Method in class SqlServerGrammar

Compile a drop column command.

SqlServerGrammar::compileDropDefaultConstraint() — Method in class SqlServerGrammar

Compile a drop default constraint command.

SqlServerGrammar::compileDropPrimary() — Method in class SqlServerGrammar

Compile a drop primary key command.

SqlServerGrammar::compileDropUnique() — Method in class SqlServerGrammar

Compile a drop unique key command.

SqlServerGrammar::compileDropIndex() — Method in class SqlServerGrammar

Compile a drop index command.

SqlServerGrammar::compileDropSpatialIndex() — Method in class SqlServerGrammar

Compile a drop spatial index command.

SqlServerGrammar::compileDropForeign() — Method in class SqlServerGrammar

Compile a drop foreign key command.

SqlServerGrammar::compileRename() — Method in class SqlServerGrammar

Compile a rename table command.

SqlServerGrammar::compileRenameIndex() — Method in class SqlServerGrammar

Compile a rename index command.

SqlServerGrammar::compileEnableForeignKeyConstraints() — Method in class SqlServerGrammar

Compile the command to enable foreign key constraints.

SqlServerGrammar::compileDisableForeignKeyConstraints() — Method in class SqlServerGrammar

Compile the command to disable foreign key constraints.

SqlServerGrammar::compileDropAllForeignKeys() — Method in class SqlServerGrammar

Compile the command to drop all foreign keys.

SqlServerGrammar::compileDropAllViews() — Method in class SqlServerGrammar

Compile the command to drop all views.

MySqlBuilder::createDatabase() — Method in class MySqlBuilder

Create a database in the schema.

MySqlSchemaState::connectionString() — Method in class MySqlSchemaState

Generate a basic connection string (--socket, --host, --port, --user, --password) for the database.

PostgresBuilder::createDatabase() — Method in class PostgresBuilder

Create a database in the schema.

SQLiteBuilder::createDatabase() — Method in class SQLiteBuilder

Create a database in the schema.

$ SchemaState#connectionProperty in class SchemaState

The connection instance.

SqlServerBuilder::createDatabase() — Method in class SqlServerBuilder

Create a database in the schema.

$ Seeder#containerProperty in class Seeder

The container instance.

$ Seeder#commandProperty in class Seeder

The console command instance.

Seeder::call() — Method in class Seeder

Run the given seeder class.

Seeder::callWith() — Method in class Seeder

Run the given seeder class.

Seeder::callSilent() — Method in class Seeder

Silently run the given seeder class.

$ Encrypter#cipherProperty in class Encrypter

The algorithm used for encryption.

CallQueuedListenerClass in namespace Illuminate\Events
$ CallQueuedListener#classProperty in class CallQueuedListener

The listener class name.

$ Dispatcher#containerProperty in class Dispatcher

The IoC container instance.

Dispatcher::createClassListener() — Method in class Dispatcher

Create a class based listener using the IoC container.

Dispatcher::createClassCallable() — Method in class Dispatcher

Create the class based event callable.

Dispatcher::createQueuedHandlerCallable() — Method in class Dispatcher

Create a callable for putting an event handler on the queue.

Dispatcher::createCallbackForListenerRunningAfterCommits() — Method in class Dispatcher

Create a callable for dispatching a listener after database transactions.

Dispatcher::createListenerAndJob() — Method in class Dispatcher

Create the listener and job for a queued listener.

$ QueuedClosure#closureProperty in class QueuedClosure

The underlying Closure.

$ QueuedClosure#connectionProperty in class QueuedClosure

The name of the connection the job should be sent to.

$ QueuedClosure#catchCallbacksProperty in class QueuedClosure

All of the "catch" callbacks for the queued closure.

QueuedClosure::catch() — Method in class QueuedClosure

Specify a callback that should be invoked if the queued listener job fails.

$ AwsS3V3Adapter#clientProperty in class AwsS3V3Adapter

The AWS S3 client.

Filesystem::chmod() — Method in class Filesystem

Get or set UNIX mode of a file or directory.

Filesystem::copy() — Method in class Filesystem

Copy a file to a new location.

Filesystem::copyDirectory() — Method in class Filesystem

Copy a directory from one location to another.

Filesystem::cleanDirectory() — Method in class Filesystem

Empty the specified directory of all files and folders.

$ FilesystemAdapter#configProperty in class FilesystemAdapter

The filesystem configuration.

FilesystemAdapter::copy() — Method in class FilesystemAdapter

Copy a file to a new location.

FilesystemAdapter::concatPathToUrl() — Method in class FilesystemAdapter

Concatenate a path to a URL.

$ FilesystemManager#customCreatorsProperty in class FilesystemManager

The registered custom driver creators.

FilesystemManager::cloud() — Method in class FilesystemManager

Get a default cloud filesystem instance.

FilesystemManager::callCustomCreator() — Method in class FilesystemManager

Call a custom driver creator.

FilesystemManager::createLocalDriver() — Method in class FilesystemManager

Create an instance of the local driver.

FilesystemManager::createFtpDriver() — Method in class FilesystemManager

Create an instance of the ftp driver.

FilesystemManager::createSftpDriver() — Method in class FilesystemManager

Create an instance of the sftp driver.

FilesystemManager::createS3Driver() — Method in class FilesystemManager

Create an instance of the Amazon S3 driver.

FilesystemManager::createFlysystem() — Method in class FilesystemManager

Create a Flysystem instance with the given adapter.

LockableFile::createResource() — Method in class LockableFile

Create the file resource.

LockableFile::close() — Method in class LockableFile

Close the file.

Application::configPath() — Method in class Application

Get the path to the application configuration files.

Application::configurationIsCached() — Method in class Application

Determine if the application configuration is cached.

Application::currentLocale() — Method in class Application

Get the current application locale.

Authorizable::can() — Method in class Authorizable

Determine if the entity has the given abilities.

Authorizable::canAny() — Method in class Authorizable

Determine if the entity has any of the given abilities.

Authorizable::cant() — Method in class Authorizable

Determine if the entity does not have the given abilities.

Authorizable::cannot() — Method in class Authorizable

Determine if the entity does not have the given abilities.

LoadEnvironmentVariables::checkForSpecificEnvironmentFile() — Method in class LoadEnvironmentVariables

Detect if a custom environment file matching the APP_ENV exists.

LoadEnvironmentVariables::createDotenv() — Method in class LoadEnvironmentVariables

Create a Dotenv instance.

$ PendingChain#chainProperty in class PendingChain

The jobs to be chained.

$ PendingChain#connectionProperty in class PendingChain

The name of the connection the chain should be sent to.

$ PendingChain#catchCallbacksProperty in class PendingChain

The callbacks to be executed on failure.

PendingChain::catch() — Method in class PendingChain

Add a callback to be executed on job failure.

PendingChain::catchCallbacks() — Method in class PendingChain

Get the "catch" callbacks that have been registered.

PendingClosureDispatch::catch() — Method in class PendingClosureDispatch

Add a callback to be executed if the job fails.

PendingDispatch::chain() — Method in class PendingDispatch

Set the jobs that should run if this job is successful.

ComposerScriptsClass in namespace Illuminate\Foundation
ComposerScripts::clearCompiled() — Method in class ComposerScripts

Clear the cached Laravel bootstrapping files.

CastMakeCommandClass in namespace Illuminate\Foundation\Console
ChannelMakeCommandClass in namespace Illuminate\Foundation\Console
ClearCompiledCommandClass in namespace Illuminate\Foundation\Console
ClosureCommandClass in namespace Illuminate\Foundation\Console
$ ClosureCommand#callbackProperty in class ClosureCommand

The command callback.

ComponentMakeCommandClass in namespace Illuminate\Foundation\Console
ConfigCacheCommandClass in namespace Illuminate\Foundation\Console
ConfigClearCommandClass in namespace Illuminate\Foundation\Console
ConsoleMakeCommandClass in namespace Illuminate\Foundation\Console
$ Kernel#commandsProperty in class Kernel

The Artisan commands provided by the application.

$ Kernel#commandsLoadedProperty in class Kernel

Indicates if the Closure commands have been loaded.

Kernel::commands() — Method in class Kernel

Register the Closure based commands for the application.

Kernel::command() — Method in class Kernel

Register a Closure based command with the application.

Kernel::call() — Method in class Kernel

Run an Artisan console command by name.

ModelMakeCommand::createFactory() — Method in class ModelMakeCommand

Create a model factory for the model.

ModelMakeCommand::createMigration() — Method in class ModelMakeCommand

Create a migration file for the model.

ModelMakeCommand::createSeeder() — Method in class ModelMakeCommand

Create a seeder file for the model.

ModelMakeCommand::createController() — Method in class ModelMakeCommand

Create a controller for the model.

ModelMakeCommand::createPolicy() — Method in class ModelMakeCommand

Create a policy file for the model.

ResourceMakeCommand::collection() — Method in class ResourceMakeCommand

Determine if the command is generating a resource collection.

$ RouteListCommand#compactColumnsProperty in class RouteListCommand

The columns to display when using the "compact" flag.

ServeCommand::canTryAnotherPort() — Method in class ServeCommand

Check if the command has reached its max amount of port tries.

VendorPublishCommand::createParentDirectory() — Method in class VendorPublishCommand

Create the directory to house the published files if needed.

ViewCacheCommand::compileViews() — Method in class ViewCacheCommand

Compile the given view files.

DiscoverEvents::classFromFile() — Method in class DiscoverEvents

Extract the class name from the given file path.

$ Handler#containerProperty in class Handler

The container implementation.

Handler::context() — Method in class Handler

Get the default context variables for logging.

Handler::convertValidationExceptionToResponse() — Method in class Handler

Create a response object from the given validation exception.

Handler::convertExceptionToResponse() — Method in class Handler

Create a Symfony response for the given exception.

Handler::convertExceptionToArray() — Method in class Handler

Convert the given exception to an array.

$ ReportableHandler#callbackProperty in class ReportableHandler

The underlying callback.

$ FormRequest#containerProperty in class FormRequest

The container instance.

FormRequest::createDefaultValidator() — Method in class FormRequest

Create the default validator instance.

MaintenanceModeBypassCookie::create() — Method in class MaintenanceModeBypassCookie

Create a new maintenance mode bypass cookie.

CheckForMaintenanceModeClass in namespace Illuminate\Foundation\Http\Middleware
ConvertEmptyStringsToNullClass in namespace Illuminate\Foundation\Http\Middleware
TransformsRequest::clean() — Method in class TransformsRequest

Clean the request's data.

TransformsRequest::cleanParameterBag() — Method in class TransformsRequest

Clean the data in the parameter bag.

TransformsRequest::cleanArray() — Method in class TransformsRequest

Clean the data in the given array.

TransformsRequest::cleanValue() — Method in class TransformsRequest

Clean the given value.

PackageManifest::config() — Method in class PackageManifest

Get all of the values for all packages for the given configuration name.

ProviderRepository::compileManifest() — Method in class ProviderRepository

Compile the application service manifest file.

ProviderRepository::createProvider() — Method in class ProviderRepository

Create a new provider instance.

$ ArtisanServiceProvider#commandsProperty in class ArtisanServiceProvider

The commands to be registered.

ComposerServiceProviderClass in namespace Illuminate\Foundation\Providers
ConsoleSupportServiceProviderClass in namespace Illuminate\Foundation\Providers
InteractsWithDatabase::castAsJson() — Method in class InteractsWithDatabase

Cast a JSON string to a database compatible type.

InteractsWithViews::component() — Method in class InteractsWithViews

Render the given view component.

DatabaseTransactions::connectionsToTransact() — Method in class DatabaseTransactions

The database connections that should have transactions.

RefreshDatabase::connectionsToTransact() — Method in class RefreshDatabase

The database connections that should have transactions.

$ TestCase#callbackExceptionProperty in class TestCase

The exception thrown while running an application destruction callback.

TestCase::createApplication() — Method in class TestCase

Creates the application.

TestCase::callBeforeApplicationDestroyedCallbacks() — Method in class TestCase

Execute the application's pre-destruction callbacks.

AbstractHasher::check() — Method in class AbstractHasher

Check the given plain value against a hash.

Argon2IdHasher::check() — Method in class Argon2IdHasher

Check the given plain value against a hash.

ArgonHasher::check() — Method in class ArgonHasher

Check the given plain value against a hash.

BcryptHasher::check() — Method in class BcryptHasher

Check the given plain value against a hash.

BcryptHasher::cost() — Method in class BcryptHasher

Extract the cost value from the options array.

HashManager::createBcryptDriver() — Method in class HashManager

Create an instance of the Bcrypt hash Driver.

HashManager::createArgonDriver() — Method in class HashManager

Create an instance of the Argon2i hash Driver.

HashManager::createArgon2idDriver() — Method in class HashManager

Create an instance of the Argon2id hash Driver.

HashManager::check() — Method in class HashManager

Check the given plain value against a hash.

ConnectionExceptionClass in namespace Illuminate\Http\Client
ConnectionFailedClass in namespace Illuminate\Http\Client\Events
Factory::contentType() — Method in class Factory
$ PendingRequest#clientProperty in class PendingRequest

The Guzzle client instance.

$ PendingRequest#cookiesProperty in class PendingRequest

The request cookies.

PendingRequest::contentType() — Method in class PendingRequest

Specify the request's content type.

PendingRequest::createClient() — Method in class PendingRequest

Create new Guzzle client.

Response::collect() — Method in class Response

Get the JSON decoded body of the response as a collection.

Response::clientError() — Method in class Response

Determine if the response indicates a client error occurred.

Response::cookies() — Method in class Response

Get the response cookies.

Response::close() — Method in class Response

Close the stream and any underlying resources.

InteractsWithInput::collect() — Method in class InteractsWithInput

Retrieve input from the request as a collection.

InteractsWithInput::cookie() — Method in class InteractsWithInput

Retrieve a cookie from the request.

InteractsWithInput::convertUploadedFiles() — Method in class InteractsWithInput

Convert the given array of Symfony UploadedFiles to custom Laravel UploadedFiles.

CheckResponseForModificationsClass in namespace Illuminate\Http\Middleware
$ Request#convertedFilesProperty in class Request

All of the converted files for the request.

Request::capture() — Method in class Request

Create a new Illuminate HTTP request from server variables.

Request::createFrom() — Method in class Request

Create a new request instance from the given Laravel request.

Request::createFromBase() — Method in class Request

Create an Illuminate request from a Symfony instance.

CollectsResourcesClass in namespace Illuminate\Http\Resources
CollectsResources::collectResource() — Method in class CollectsResources

Map the given collection resource into its individual resources.

CollectsResources::collects() — Method in class CollectsResources

Get the resource that this resource collects.

ConditionallyLoadsAttributesClass in namespace Illuminate\Http\Resources
$ AnonymousResourceCollection#collectsProperty in class AnonymousResourceCollection

The name of the resource being collected.

JsonResource::collection() — Method in class JsonResource

Create a new anonymous resource collection.

$ ResourceCollection#collectsProperty in class ResourceCollection

The resource that this resource collects.

$ ResourceCollection#collectionProperty in class ResourceCollection

The mapped collection instance.

ResourceCollection::count() — Method in class ResourceCollection

Return the count of items in the resource collection.

ResourceResponse::calculateStatus() — Method in class ResourceResponse

Calculate the appropriate status code for the response.

ResponseTrait::content() — Method in class ResponseTrait

Get the content of the response.

ResponseTrait::cookie() — Method in class ResponseTrait

Add a cookie to the response.

File::create() — Method in class File

Create a new fake file.

File::createWithContent() — Method in class File

Create a new fake file with content.

FileFactory::create() — Method in class FileFactory

Create a new fake file.

FileFactory::createWithContent() — Method in class FileFactory

Create a new fake file with content.

UploadedFile::clientExtension() — Method in class UploadedFile

Get the file's extension supplied by the client.

UploadedFile::createFromBase() — Method in class UploadedFile

Create a new file instance from a base instance.

$ MessageLogged#contextProperty in class MessageLogged

The log context.

$ LogManager#channelsProperty in class LogManager

The array of resolved channels.

$ LogManager#customCreatorsProperty in class LogManager

The registered custom driver creators.

LogManager::channel() — Method in class LogManager

Get a log channel instance.

LogManager::createEmergencyLogger() — Method in class LogManager

Create an emergency log handler to avoid white screens of death.

LogManager::callCustomCreator() — Method in class LogManager

Call a custom driver creator.

LogManager::createCustomDriver() — Method in class LogManager

Create a custom log driver instance.

LogManager::createStackDriver() — Method in class LogManager

Create an aggregate log driver instance.

LogManager::createSingleDriver() — Method in class LogManager

Create an instance of the single file log driver.

LogManager::createDailyDriver() — Method in class LogManager

Create an instance of the daily file log driver.

LogManager::createSlackDriver() — Method in class LogManager

Create an instance of the Slack log driver.

LogManager::createSyslogDriver() — Method in class LogManager

Create an instance of the syslog log driver.

LogManager::createErrorlogDriver() — Method in class LogManager

Create an instance of the "error log" log driver.

LogManager::createMonologDriver() — Method in class LogManager

Create an instance of any handler available in Monolog.

LogManager::configurationFor() — Method in class LogManager

Get the log connection configuration.

LogManager::critical() — Method in class LogManager

Critical conditions.

$ Logger#contextProperty in class Logger

Any context to be added to logs.

Logger::critical() — Method in class Logger

Log a critical message to the logs.

$ MailManager#customCreatorsProperty in class MailManager

The registered custom driver creators.

MailManager::createSymfonyTransport() — Method in class MailManager

Create a new transport instance.

MailManager::createSmtpTransport() — Method in class MailManager

Create an instance of the Symfony SMTP Transport driver.

MailManager::configureSmtpTransport() — Method in class MailManager

Configure the additional SMTP driver options.

MailManager::createSendmailTransport() — Method in class MailManager

Create an instance of the Symfony Sendmail Transport driver.

MailManager::createSesTransport() — Method in class MailManager

Create an instance of the Symfony Amazon SES Transport driver.

MailManager::createMailTransport() — Method in class MailManager

Create an instance of the Symfony Mail Transport driver.

MailManager::createMailgunTransport() — Method in class MailManager

Create an instance of the Symfony Mailgun Transport driver.

MailManager::createPostmarkTransport() — Method in class MailManager

Create an instance of the Symfony Postmark Transport driver.

MailManager::createFailoverTransport() — Method in class MailManager

Create an instance of the Symfony Failover Transport driver.

MailManager::createLogTransport() — Method in class MailManager

Create an instance of the Log Transport driver.

MailManager::createArrayTransport() — Method in class MailManager

Create an instance of the Array Transport Driver.

$ Mailable#ccProperty in class Mailable

The "cc" recipients of the message.

$ Mailable#callbacksProperty in class Mailable

The callbacks for the message.

Mailable::cc() — Method in class Mailable

Set the recipients of the message.

Mailer::cc() — Method in class Mailer

Begin the process of mailing a mailable class instance.

Mailer::createMessage() — Method in class Mailer

Create a new message instance.

$ Markdown#componentPathsProperty in class Markdown

The registered component paths.

Markdown::componentPaths() — Method in class Markdown

Get the component paths.

Message::cc() — Method in class Message

Add a carbon copy to the message.

$ PendingMail#ccProperty in class PendingMail

The "cc" recipients of the message.

PendingMail::cc() — Method in class PendingMail

Set the recipients of the message.

ChannelManagerClass in namespace Illuminate\Notifications
ChannelManager::channel() — Method in class ChannelManager

Get a channel instance.

ChannelManager::createDatabaseDriver() — Method in class ChannelManager

Create an instance of the database driver.

ChannelManager::createBroadcastDriver() — Method in class ChannelManager

Create an instance of the broadcast driver.

ChannelManager::createMailDriver() — Method in class ChannelManager

Create an instance of the mail driver.

ChannelManager::createDriver() — Method in class ChannelManager

Create a new driver instance.

$ NotificationTableCommand#composerProperty in class NotificationTableCommand
NotificationTableCommand::createBaseMigration() — Method in class NotificationTableCommand

Create a base migration file for the notifications.

$ DatabaseNotification#castsProperty in class DatabaseNotification

The attributes that should be cast to native types.

BroadcastNotificationCreated::channelName() — Method in class BroadcastNotificationCreated

Get the broadcast channel name for the event.

$ NotificationFailed#channelProperty in class NotificationFailed

The channel name.

$ NotificationSending#channelProperty in class NotificationSending

The channel name.

$ NotificationSent#channelProperty in class NotificationSent

The channel name.

$ MailMessage#ccProperty in class MailMessage

The "cc" information for the message.

$ MailMessage#callbacksProperty in class MailMessage

The callbacks for the message.

MailMessage::cc() — Method in class MailMessage

Set the cc address for the mail message.

$ SendQueuedNotifications#channelsProperty in class SendQueuedNotifications

All of the channels to send the notification to.

$ AbstractCursorPaginator#cursorNameProperty in class AbstractCursorPaginator

The cursor string variable used to store the page.

$ AbstractCursorPaginator#cursorProperty in class AbstractCursorPaginator

The current cursor.

$ AbstractCursorPaginator#currentCursorResolverProperty in class AbstractCursorPaginator

The current cursor resolver callback.

AbstractCursorPaginator::cursor() — Method in class AbstractCursorPaginator

Get the current cursor being paginated.

AbstractCursorPaginator::currentCursorResolver() — Method in class AbstractCursorPaginator

Set the current cursor resolver callback.

AbstractCursorPaginator::count() — Method in class AbstractCursorPaginator

Get the number of items for the current page.

$ AbstractPaginator#currentPageProperty in class AbstractPaginator

The current page being "viewed".

$ AbstractPaginator#currentPathResolverProperty in class AbstractPaginator

The current path resolver callback.

$ AbstractPaginator#currentPageResolverProperty in class AbstractPaginator

The current page resolver callback.

AbstractPaginator::currentPage() — Method in class AbstractPaginator

Get the current page.

AbstractPaginator::currentPathResolver() — Method in class AbstractPaginator

Set the current request path resolver callback.

AbstractPaginator::currentPageResolver() — Method in class AbstractPaginator

Set the current page resolver callback.

AbstractPaginator::count() — Method in class AbstractPaginator

Get the number of items for the current page.

CursorClass in namespace Illuminate\Pagination
CursorPaginatorClass in namespace Illuminate\Pagination
UrlWindow::currentPage() — Method in class UrlWindow

Get the current page from the paginator.

$ Hub#containerProperty in class Hub

The container implementation.

$ Pipeline#containerProperty in class Pipeline

The container implementation.

Pipeline::carry() — Method in class Pipeline

Get a Closure that represents a slice of the application onion.

CallQueuedClosureClass in namespace Illuminate\Queue
$ CallQueuedClosure#closureProperty in class CallQueuedClosure

The serializable Closure instance.

CallQueuedClosure::create() — Method in class CallQueuedClosure

Create a new job instance.

CallQueuedHandlerClass in namespace Illuminate\Queue
$ CallQueuedHandler#containerProperty in class CallQueuedHandler

The container instance.

CallQueuedHandler::call() — Method in class CallQueuedHandler

Handle the queued job.

Manager::connection() — Method in class Manager

Get a connection instance from the global manager.

BeanstalkdConnector::connect() — Method in class BeanstalkdConnector

Establish a queue connection.

ConnectorInterfaceClass in namespace Illuminate\Queue\Connectors
ConnectorInterface::connect() — Method in class ConnectorInterface

Establish a queue connection.

$ DatabaseConnector#connectionsProperty in class DatabaseConnector

Database connections.

DatabaseConnector::connect() — Method in class DatabaseConnector

Establish a queue connection.

NullConnector::connect() — Method in class NullConnector

Establish a queue connection.

$ RedisConnector#connectionProperty in class RedisConnector

The connection name.

RedisConnector::connect() — Method in class RedisConnector

Establish a queue connection.

SqsConnector::connect() — Method in class SqsConnector

Establish a queue connection.

SyncConnector::connect() — Method in class SyncConnector

Establish a queue connection.

$ BatchesTableCommand#composerProperty in class BatchesTableCommand
BatchesTableCommand::createBaseMigration() — Method in class BatchesTableCommand

Create a base migration file for the table.

ClearCommandClass in namespace Illuminate\Queue\Console
$ FailedTableCommand#composerProperty in class FailedTableCommand
FailedTableCommand::createBaseMigration() — Method in class FailedTableCommand

Create a base migration file for the table.

$ RestartCommand#cacheProperty in class RestartCommand

The cache store implementation.

$ TableCommand#composerProperty in class TableCommand
TableCommand::createBaseMigration() — Method in class TableCommand

Create a base migration file for the table.

$ WorkCommand#cacheProperty in class WorkCommand

The cache store implementation.

DatabaseQueue::clear() — Method in class DatabaseQueue

Delete all of the jobs from the queue.

$ JobExceptionOccurred#connectionNameProperty in class JobExceptionOccurred

The connection name.

$ JobFailed#connectionNameProperty in class JobFailed

The connection name.

$ JobProcessed#connectionNameProperty in class JobProcessed

The connection name.

$ JobProcessing#connectionNameProperty in class JobProcessing

The connection name.

$ JobQueued#connectionNameProperty in class JobQueued

The connection name.

$ Looping#connectionNameProperty in class Looping

The connection name.

$ QueueBusy#connectionProperty in class QueueBusy

The connection name.

$ Job#containerProperty in class Job

The IoC container instance.

$ Job#connectionNameProperty in class Job

The name of the connection the job belongs to.

$ Listener#commandPathProperty in class Listener

The command working path.

Listener::createCommand() — Method in class Listener

Create the command with the listener options.

LuaScripts::clear() — Method in class LuaScripts

Get the Lua script for removing all jobs from the queue.

$ Queue#containerProperty in class Queue

The IoC container instance.

$ Queue#connectionNameProperty in class Queue

The connection name for the queue.

$ Queue#createPayloadCallbacksProperty in class Queue

The create payload callbacks.

Queue::createPayload() — Method in class Queue

Create a payload string from the given job and data.

Queue::createPayloadArray() — Method in class Queue

Create a payload array from the given job and data.

Queue::createObjectPayload() — Method in class Queue

Create a payload for an object-based queue handler.

Queue::createStringPayload() — Method in class Queue

Create a typical, string based queue payload array.

Queue::createPayloadUsing() — Method in class Queue

Register a callback to be executed when creating job payloads.

$ QueueManager#connectionsProperty in class QueueManager

The array of resolved queue connections.

$ QueueManager#connectorsProperty in class QueueManager

The array of resolved queue connectors.

QueueManager::connected() — Method in class QueueManager

Determine if the driver is connected.

QueueManager::connection() — Method in class QueueManager

Resolve a queue connection instance.

QueueServiceProvider::configureSerializableClosureUses() — Method in class QueueServiceProvider

Configure serializable closures uses.

$ RedisQueue#connectionProperty in class RedisQueue

The connection name.

RedisQueue::createPayloadArray() — Method in class RedisQueue

Create a payload string from the given job and data.

RedisQueue::clear() — Method in class RedisQueue

Delete all of the jobs from the queue.

SqsQueue::clear() — Method in class SqsQueue

Delete all of the jobs from the queue.

$ Worker#cacheProperty in class Worker

The cache repository implementation.

Worker::calculateBackoff() — Method in class Worker

Calculate the backoff for the given job.

ConnectionClass in namespace Illuminate\Redis\Connections
$ Connection#clientProperty in class Connection

The Redis client.

Connection::createSubscription() — Method in class Connection

Subscribe to a set of given channels for messages.

Connection::client() — Method in class Connection

Get the underlying Redis client.

Connection::command() — Method in class Connection

Run a command against the Redis database.

$ PhpRedisConnection#connectorProperty in class PhpRedisConnection

The connection creation callback.

$ PhpRedisConnection#configProperty in class PhpRedisConnection

The connection configuration array.

PhpRedisConnection::createSubscription() — Method in class PhpRedisConnection

Subscribe to a set of given channels for messages.

PhpRedisConnection::command() — Method in class PhpRedisConnection

Run a command against the Redis database.

$ PredisConnection#clientProperty in class PredisConnection

The Predis client.

PredisConnection::createSubscription() — Method in class PredisConnection

Subscribe to a set of given channels for messages.

PhpRedisConnector::connect() — Method in class PhpRedisConnector

Create a new clustered PhpRedis connection.

PhpRedisConnector::connectToCluster() — Method in class PhpRedisConnector

Create a new clustered PhpRedis connection.

PhpRedisConnector::createClient() — Method in class PhpRedisConnector

Create the Redis client instance.

PhpRedisConnector::createRedisClusterInstance() — Method in class PhpRedisConnector

Create a new redis cluster instance.

PredisConnector::connect() — Method in class PredisConnector

Create a new clustered Predis connection.

PredisConnector::connectToCluster() — Method in class PredisConnector

Create a new clustered Predis connection.

CommandExecutedClass in namespace Illuminate\Redis\Events
$ CommandExecuted#commandProperty in class CommandExecuted

The Redis command that was executed.

$ CommandExecuted#connectionProperty in class CommandExecuted

The Redis connection instance.

$ CommandExecuted#connectionNameProperty in class CommandExecuted

The Redis connection name.

ConcurrencyLimiterClass in namespace Illuminate\Redis\Limiters
ConcurrencyLimiterBuilderClass in namespace Illuminate\Redis\Limiters
$ ConcurrencyLimiterBuilder#connectionProperty in class ConcurrencyLimiterBuilder

The Redis connection.

DurationLimiter::clear() — Method in class DurationLimiter

Clear the limiter.

$ DurationLimiterBuilder#connectionProperty in class DurationLimiterBuilder

The Redis connection.

$ RedisManager#customCreatorsProperty in class RedisManager

The registered custom driver creators.

$ RedisManager#configProperty in class RedisManager

The Redis server configurations.

$ RedisManager#connectionsProperty in class RedisManager

The Redis connections.

RedisManager::connection() — Method in class RedisManager

Get a Redis connection by name.

RedisManager::configure() — Method in class RedisManager

Configure the given connection to prepare it for commands.

RedisManager::connector() — Method in class RedisManager

Get the connector instance for the current driver.

RedisManager::connections() — Method in class RedisManager

Return all of the created connections.

AbstractRouteCollection::checkForAlternateVerbs() — Method in class AbstractRouteCollection

Determine if any routes match on another HTTP verb.

AbstractRouteCollection::compile() — Method in class AbstractRouteCollection

Compile the routes for caching.

AbstractRouteCollection::count() — Method in class AbstractRouteCollection

Count the number of items in the collection.

CompiledRouteCollectionClass in namespace Illuminate\Routing
$ CompiledRouteCollection#compiledProperty in class CompiledRouteCollection

The compiled routes collection.

$ CompiledRouteCollection#containerProperty in class CompiledRouteCollection

The container instance used by the route.

ControllerMakeCommandClass in namespace Illuminate\Routing\Console
ControllerDispatcherClass in namespace Illuminate\Routing\Contracts
ControllerClass in namespace Illuminate\Routing
Controller::callAction() — Method in class Controller

Execute an action on the controller.

ControllerDispatcherClass in namespace Illuminate\Routing
$ ControllerDispatcher#containerProperty in class ControllerDispatcher

The container instance.

ControllerMiddlewareOptionsClass in namespace Illuminate\Routing
CreatesRegularExpressionRouteConstraintsClass in namespace Illuminate\Routing
ThrottleRequests::calculateRemainingAttempts() — Method in class ThrottleRequests

Calculate the number of remaining attempts.

ThrottleRequestsWithRedis::calculateRemainingAttempts() — Method in class ThrottleRequestsWithRedis

Calculate the number of remaining attempts.

$ PendingResourceRegistration#controllerProperty in class PendingResourceRegistration

The resource controller.

Redirector::createRedirect() — Method in class Redirector

Create a new redirect response.

$ Route#controllerProperty in class Route

The controller instance.

$ Route#computedMiddlewareProperty in class Route

The computed gathered middleware.

$ Route#compiledProperty in class Route

The compiled version of the route.

$ Route#containerProperty in class Route

The container instance used by the route.

Route::compileRoute() — Method in class Route

Compile the route into a Symfony CompiledRoute instance.

Route::compileParameterNames() — Method in class Route

Get the parameter names for the route.

Route::controllerMiddleware() — Method in class Route

Get the middleware for the route's controller.

Route::controllerDispatcher() — Method in class Route

Get the dispatcher for the route's controller.

RouteAction::containsSerializedClosure() — Method in class RouteAction

Determine if the given array actions contain a serialized Closure.

RouteBinding::createClassBinding() — Method in class RouteBinding

Create a class based binding using the IoC container.

RouteRegistrar::compileAction() — Method in class RouteRegistrar

Compile the action into an array including the attributes.

$ Router#containerProperty in class Router

The IoC container instance.

$ Router#currentProperty in class Router

The currently dispatched route instance.

$ Router#currentRequestProperty in class Router

The request currently being dispatched.

Router::createRoute() — Method in class Router

Create a new route instance.

Router::convertToControllerAction() — Method in class Router

Add a controller based route action to the action array.

Router::current() — Method in class Router

Get the currently dispatched route instance.

Router::currentRouteName() — Method in class Router

Get the current route name.

Router::currentRouteNamed() — Method in class Router

Determine if the current route matches a pattern.

Router::currentRouteAction() — Method in class Router

Get the current route action.

Router::currentRouteUses() — Method in class Router

Determine if the current route action matches a given action.

$ UrlGenerator#cachedRootProperty in class UrlGenerator

A cached copy of the URL root for the current request.

$ UrlGenerator#cachedSchemeProperty in class UrlGenerator

A cached copy of the URL scheme for the current request.

UrlGenerator::current() — Method in class UrlGenerator

Get the current URL for the request.

ArraySessionHandler::close() — Method in class ArraySessionHandler

{@inheritdoc}

ArraySessionHandler::calculateExpiration() — Method in class ArraySessionHandler

Get the expiration time of the session.

CacheBasedSessionHandlerClass in namespace Illuminate\Session
$ CacheBasedSessionHandler#cacheProperty in class CacheBasedSessionHandler

The cache repository instance.

CacheBasedSessionHandler::close() — Method in class CacheBasedSessionHandler

{@inheritdoc}

$ SessionTableCommand#composerProperty in class SessionTableCommand
SessionTableCommand::createBaseMigration() — Method in class SessionTableCommand

Create a base migration file for the session.

CookieSessionHandlerClass in namespace Illuminate\Session
$ CookieSessionHandler#cookieProperty in class CookieSessionHandler

The cookie jar instance.

CookieSessionHandler::close() — Method in class CookieSessionHandler

{@inheritdoc}

$ DatabaseSessionHandler#connectionProperty in class DatabaseSessionHandler

The database connection instance.

$ DatabaseSessionHandler#containerProperty in class DatabaseSessionHandler

The container instance.

DatabaseSessionHandler::close() — Method in class DatabaseSessionHandler

{@inheritdoc}

FileSessionHandler::close() — Method in class FileSessionHandler

{@inheritdoc}

$ StartSession#cacheFactoryResolverProperty in class StartSession

The callback that can resolve an instance of the cache factory.

StartSession::collectGarbage() — Method in class StartSession

Remove the garbage from the session if necessary.

StartSession::configHitsLottery() — Method in class StartSession

Determine if the configuration odds hit the lottery.

StartSession::cache() — Method in class StartSession

Resolve the given cache driver.

NullSessionHandler::close() — Method in class NullSessionHandler

{@inheritdoc}

SessionManager::callCustomCreator() — Method in class SessionManager

Call a custom driver creator.

SessionManager::createNullDriver() — Method in class SessionManager

Create an instance of the "null" session driver.

SessionManager::createArrayDriver() — Method in class SessionManager

Create an instance of the "array" session driver.

SessionManager::createCookieDriver() — Method in class SessionManager

Create an instance of the "cookie" session driver.

SessionManager::createFileDriver() — Method in class SessionManager

Create an instance of the file session driver.

SessionManager::createNativeDriver() — Method in class SessionManager

Create an instance of the file session driver.

SessionManager::createDatabaseDriver() — Method in class SessionManager

Create an instance of the database session driver.

SessionManager::createApcDriver() — Method in class SessionManager

Create an instance of the APC session driver.

SessionManager::createMemcachedDriver() — Method in class SessionManager

Create an instance of the Memcached session driver.

SessionManager::createRedisDriver() — Method in class SessionManager

Create an instance of the Redis session driver.

SessionManager::createDynamodbDriver() — Method in class SessionManager

Create an instance of the DynamoDB session driver.

SessionManager::createCacheBased() — Method in class SessionManager

Create an instance of a cache driven driver.

SessionManager::createCacheHandler() — Method in class SessionManager

Create the cache based session handler instance.

Arr::collapse() — Method in class Arr

Collapse an array of arrays into a single array.

Arr::crossJoin() — Method in class Arr

Cross join the given arrays, returning all possible permutations.

CarbonClass in namespace Illuminate\Support
CollectionClass in namespace Illuminate\Support
Collection::collapse() — Method in class Collection
Collection::contains() — Method in class Collection

Determine if an item exists in the collection.

Collection::crossJoin() — Method in class Collection
Collection::containsOneItem() — Method in class Collection

Determine if the collection contains a single item.

Collection::combine() — Method in class Collection
Collection::concat() — Method in class Collection
Collection::chunk() — Method in class Collection
Collection::chunkWhile() — Method in class Collection
Collection::count() — Method in class Collection

Count the number of items in the collection.

Collection::countBy() — Method in class Collection
ComposerClass in namespace Illuminate\Support
ConfigurationUrlParserClass in namespace Illuminate\Support
$ DateFactory#callableProperty in class DateFactory

This callable may be used to intercept date creation.

DateFactory::create() — Method in class DateFactory
DateFactory::createFromDate() — Method in class DateFactory
DateFactory::createFromFormat() — Method in class DateFactory
DateFactory::createFromTime() — Method in class DateFactory
DateFactory::createFromTimeString() — Method in class DateFactory
DateFactory::createFromTimestamp() — Method in class DateFactory
DateFactory::createFromTimestampMs() — Method in class DateFactory
DateFactory::createFromTimestampUTC() — Method in class DateFactory
DateFactory::createMidnightDate() — Method in class DateFactory
DateFactory::createSafe() — Method in class DateFactory
Enumerable::collapse() — Method in class Enumerable
Enumerable::containsStrict() — Method in class Enumerable

Determine if an item exists, using strict comparison.

Enumerable::contains() — Method in class Enumerable

Determine if an item exists in the enumerable.

Enumerable::crossJoin() — Method in class Enumerable
Enumerable::combine() — Method in class Enumerable
Enumerable::concat() — Method in class Enumerable
Enumerable::chunk() — Method in class Enumerable
Enumerable::chunkWhile() — Method in class Enumerable
Enumerable::countBy() — Method in class Enumerable
Enumerable::collect() — Method in class Enumerable

Collect the values into a collection.

App::configurationIsCached() — Method in class App
App::configPath() — Method in class App
App::currentLocale() — Method in class App
Artisan::command() — Method in class Artisan
Artisan::call() — Method in class Artisan
Auth::createUserProvider() — Method in class Auth
Auth::check() — Method in class Auth
Blade::check() — Method in class Blade
Blade::compileString() — Method in class Blade
Blade::compile() — Method in class Blade
Blade::component() — Method in class Blade
Blade::components() — Method in class Blade
Blade::componentNamespace() — Method in class Blade
Broadcast::channel() — Method in class Broadcast
Broadcast::connection() — Method in class Broadcast

;

Bus::chain() — Method in class Bus
CacheClass in namespace Illuminate\Support\Facades
ConfigClass in namespace Illuminate\Support\Facades
CookieClass in namespace Illuminate\Support\Facades
CryptClass in namespace Illuminate\Support\Facades
DB::connection() — Method in class DB
DB::commit() — Method in class DB
Date::create() — Method in class Date
Date::createFromDate() — Method in class Date
Date::createFromTime() — Method in class Date
Date::createFromTimeString() — Method in class Date
Date::createFromTimestamp() — Method in class Date
Date::createFromTimestampMs() — Method in class Date
Date::createFromTimestampUTC() — Method in class Date
Date::createMidnightDate() — Method in class Date
Date::createFromFormat() — Method in class Date
Date::createSafe() — Method in class Date
Event::createClassListener() — Method in class Event
$ Facade#cachedProperty in class Facade

Indicates if the resolved instance should be cached.

Facade::createFreshMockInstance() — Method in class Facade

Create a fresh mock instance for the given class.

Facade::createMock() — Method in class Facade

Create a fresh mock instance for the given class.

Facade::clearResolvedInstance() — Method in class Facade

Clear a resolved facade instance.

Facade::clearResolvedInstances() — Method in class Facade

Clear all of the resolved instances.

File::cleanDirectory() — Method in class File
File::copy() — Method in class File
File::copyDirectory() — Method in class File
File::chmod() — Method in class File
Gate::check() — Method in class Gate
Hash::check() — Method in class Hash
Http::contentType() — Method in class Http
Lang::choice() — Method in class Lang
Log::channel() — Method in class Log
Log::critical() — Method in class Log
Notification::channel() — Method in class Notification
Password::createToken() — Method in class Password
RateLimiter::clear() — Method in class RateLimiter
Redis::connection() — Method in class Redis
Request::capture() — Method in class Request
Request::createFrom() — Method in class Request
Request::createFromBase() — Method in class Request
Request::cookie() — Method in class Request
Route::current() — Method in class Route
Route::currentRouteAction() — Method in class Route
Route::currentRouteName() — Method in class Route
$ Schema#cachedProperty in class Schema

Indicates if the resolved facade should be cached.

Schema::connection() — Method in class Schema

Get a schema builder instance for a connection.

Schema::create() — Method in class Schema
Schema::createDatabase() — Method in class Schema
Storage::cloud() — Method in class Storage
Storage::copy() — Method in class Storage
URL::current() — Method in class URL
View::composer() — Method in class View
View::creator() — Method in class View
$ HigherOrderCollectionProxy#collectionProperty in class HigherOrderCollectionProxy

The collection being operated on.

$ HigherOrderWhenProxy#conditionProperty in class HigherOrderWhenProxy

The condition for proxying.

InteractsWithTime::currentTime() — Method in class InteractsWithTime

Get the current system time as a UNIX timestamp.

LazyCollection::collapse() — Method in class LazyCollection

Collapse the collection of items into a single array.

LazyCollection::contains() — Method in class LazyCollection

Determine if an item exists in the enumerable.

LazyCollection::crossJoin() — Method in class LazyCollection

Cross join the given iterables, returning all possible permutations.

LazyCollection::countBy() — Method in class LazyCollection

Count the number of items in the collection by a field or using a callback.

LazyCollection::containsOneItem() — Method in class LazyCollection

Determine if the collection contains a single item.

LazyCollection::combine() — Method in class LazyCollection

Create a collection by using this collection for keys and another for its values.

LazyCollection::concat() — Method in class LazyCollection

Push all of the given items onto the collection.

LazyCollection::chunk() — Method in class LazyCollection

Chunk the collection into chunks of the given size.

LazyCollection::chunkWhile() — Method in class LazyCollection

Chunk the collection into chunks with a callback.

LazyCollection::count() — Method in class LazyCollection

Count the number of items in the collection.

$ Manager#containerProperty in class Manager

The container instance.

$ Manager#configProperty in class Manager

The configuration repository instance.

$ Manager#customCreatorsProperty in class Manager

The registered custom driver creators.

Manager::createDriver() — Method in class Manager

Create a new driver instance.

Manager::callCustomCreator() — Method in class Manager

Call a custom driver creator.

MessageBag::checkFormat() — Method in class MessageBag

Get the appropriate format based on the given format.

MessageBag::count() — Method in class MessageBag

Get the number of messages in the message bag.

ServiceProvider::callBootingCallbacks() — Method in class ServiceProvider

Call the registered booting callbacks.

ServiceProvider::callBootedCallbacks() — Method in class ServiceProvider

Call the registered booted callbacks.

ServiceProvider::callAfterResolving() — Method in class ServiceProvider

Setup an after resolving listener, or fire immediately if already resolved.

ServiceProvider::commands() — Method in class ServiceProvider

Register the package's custom Artisan commands.

$ Str#camelCacheProperty in class Str

The cache of camel-cased words.

Str::camel() — Method in class Str

Convert a value to camel case.

Str::contains() — Method in class Str

Determine if a given string contains a given substring.

Str::containsAll() — Method in class Str

Determine if a given string contains all array values.

Str::createUuidsUsing() — Method in class Str

Set the callable that will be used to generate UUIDs.

Str::createUuidsNormally() — Method in class Str

Indicate that UUIDs should be created normally and not using a custom factory.

Stringable::classBasename() — Method in class Stringable

Get the basename of the class path.

Stringable::camel() — Method in class Stringable

Convert a value to camel case.

Stringable::contains() — Method in class Stringable

Determine if a given string contains a given substring.

Stringable::containsAll() — Method in class Stringable

Determine if a given string contains all array values.

BatchRepositoryFake::cancel() — Method in class BatchRepositoryFake

Cancel the batch that has the given ID.

$ BusFake#commandsProperty in class BusFake

The commands that have been dispatched.

$ BusFake#commandsSyncProperty in class BusFake

The commands that have been dispatched synchronously.

$ BusFake#commandsAfterResponseProperty in class BusFake

The commands that have been dispatched after the response has been sent.

BusFake::chain() — Method in class BusFake

Create a new chain of queueable jobs.

$ MailFake#currentMailerProperty in class MailFake

The mailer currently being used to send a message.

NotificationFake::channel() — Method in class NotificationFake

Get a channel instance by name.

QueueFake::connection() — Method in class QueueFake

Resolve a queue connection instance.

CapsuleManagerTraitClass in namespace Illuminate\Support\Traits
$ CapsuleManagerTrait#containerProperty in class CapsuleManagerTrait

The container instance.

ConditionableClass in namespace Illuminate\Support\Traits
$ EnumeratesValues#containsProperty in class EnumeratesValues
EnumeratesValues::containsStrict() — Method in class EnumeratesValues

Determine if an item exists, using strict comparison.

EnumeratesValues::collect() — Method in class EnumeratesValues

Collect the values into a collection.

ReflectsClosures::closureParameterTypes() — Method in class ReflectsClosures

Get the class names / types of the parameters of the given Closure.

ValidatedInput::collect() — Method in class ValidatedInput

Get the input as a collection.

ViewErrorBag::count() — Method in class ViewErrorBag

Get the number of messages in the default bag.

AssertableJsonString::count() — Method in class AssertableJsonString

Get the total number of items in the underlying JSON array.

CountInDatabaseClass in namespace Illuminate\Testing\Constraints
$ SeeInOrder#contentProperty in class SeeInOrder

The string under validation.

Has::count() — Method in class Has

Assert that the prop is of the expected size.

ParallelRunner::createApplication() — Method in class ParallelRunner

Creates the application.

$ ParallelTesting#containerProperty in class ParallelTesting

The container instance.

ParallelTesting::callSetUpProcessCallbacks() — Method in class ParallelTesting

Call all of the "setUp" process callbacks.

ParallelTesting::callSetUpTestCaseCallbacks() — Method in class ParallelTesting

Call all of the "setUp" test case callbacks.

ParallelTesting::callSetUpTestDatabaseCallbacks() — Method in class ParallelTesting

Call all of the "setUp" test database callbacks.

ParallelTesting::callTearDownProcessCallbacks() — Method in class ParallelTesting

Call all of the "tearDown" process callbacks.

ParallelTesting::callTearDownTestCaseCallbacks() — Method in class ParallelTesting

Call all of the "tearDown" test case callbacks.

$ PendingCommand#commandProperty in class PendingCommand

The command to run.

$ TestComponent#componentProperty in class TestComponent

The original component.

MessageSelector::choose() — Method in class MessageSelector

Select a proper translation string based on the given number.

Translator::choice() — Method in class Translator

Get a translation according to an integer value.

ClosureValidationRuleClass in namespace Illuminate\Validation
$ ClosureValidationRule#callbackProperty in class ClosureValidationRule

The callback that validates the attribute.

FormatsMessages::callReplacer() — Method in class FormatsMessages

Call a custom validator message replacer.

FormatsMessages::callClassBasedReplacer() — Method in class FormatsMessages

Call a class based validator message replacer.

ValidatesAttributes::compareDates() — Method in class ValidatesAttributes

Compare a given date against another using an operator.

ValidatesAttributes::checkDateTimeOrder() — Method in class ValidatesAttributes

Given two date/time strings, check that one is after the other.

ValidatesAttributes::convertValuesToBoolean() — Method in class ValidatesAttributes

Convert the given values to boolean if they are string "true" / "false".

ValidatesAttributes::convertValuesToNull() — Method in class ValidatesAttributes

Convert the given values to null if they are string "null".

ValidatesAttributes::compare() — Method in class ValidatesAttributes

Determine if a comparison passes between the given values.

ConditionalRulesClass in namespace Illuminate\Validation
$ ConditionalRules#conditionProperty in class ConditionalRules

The boolean condition indicating if the rules should be added to the attribute.

$ DatabasePresenceVerifier#connectionProperty in class DatabasePresenceVerifier

The database connection to use.

$ Factory#containerProperty in class Factory

The IoC container instance.

$ DatabaseRule#columnProperty in class DatabaseRule

The column to check on.

$ Dimensions#constraintsProperty in class Dimensions

The constraints for the dimensions rule.

$ Password#compromisedThresholdProperty in class Password

The number of times a password can appear in data leaks before being consider compromised.

$ RequiredIf#conditionProperty in class RequiredIf

The condition that validates the attribute.

$ Validator#containerProperty in class Validator

The container instance.

$ Validator#currentRuleProperty in class Validator

The current rule that is validating.

$ Validator#customMessagesProperty in class Validator

The array of custom error messages.

$ Validator#customAttributesProperty in class Validator

The array of custom attribute names.

$ Validator#customValuesProperty in class Validator

The array of custom displayable values.

Validator::callExtension() — Method in class Validator

Call a custom validator extension.

Validator::callClassBasedExtension() — Method in class Validator

Call a class based validator extension.

$ BladeCompiler#customDirectivesProperty in class BladeCompiler

All custom "directive" handlers.

$ BladeCompiler#conditionsProperty in class BladeCompiler

All custom "condition" handlers.

$ BladeCompiler#compilersProperty in class BladeCompiler

All of the available compiler functions.

$ BladeCompiler#contentTagsProperty in class BladeCompiler

Array of opening and closing tags for regular echos.

$ BladeCompiler#classComponentAliasesProperty in class BladeCompiler

The array of class component aliases and their class names.

$ BladeCompiler#classComponentNamespacesProperty in class BladeCompiler

The array of class component namespaces to autoload from.

$ BladeCompiler#compilesComponentTagsProperty in class BladeCompiler

Indicates if component tags should be compiled.

BladeCompiler::compile() — Method in class BladeCompiler

Compile the view at the given path.

BladeCompiler::compileString() — Method in class BladeCompiler

Compile the given Blade template contents.

BladeCompiler::compileComponentTags() — Method in class BladeCompiler

Compile the component tags.

BladeCompiler::compileExtensions() — Method in class BladeCompiler

Execute the user defined extensions.

BladeCompiler::compileStatements() — Method in class BladeCompiler

Compile Blade statements that start with "@".

BladeCompiler::compileStatement() — Method in class BladeCompiler

Compile a single Blade @ statement.

BladeCompiler::callCustomDirective() — Method in class BladeCompiler

Call the given directive with the given value.

BladeCompiler::check() — Method in class BladeCompiler

Check the result of a condition.

BladeCompiler::component() — Method in class BladeCompiler

Register a class-based component alias directive.

BladeCompiler::components() — Method in class BladeCompiler

Register an array of class-based components.

BladeCompiler::componentNamespace() — Method in class BladeCompiler

Register a class-based component namespace.

CompilerClass in namespace Illuminate\View\Compilers
$ Compiler#cachePathProperty in class Compiler

Get the cache path for the compiled views.

CompilerInterfaceClass in namespace Illuminate\View\Compilers
CompilerInterface::compile() — Method in class CompilerInterface

Compile the view at the given path.

ComponentTagCompilerClass in namespace Illuminate\View\Compilers
ComponentTagCompiler::compile() — Method in class ComponentTagCompiler

Compile the component and slot tags within the given string.

ComponentTagCompiler::compileTags() — Method in class ComponentTagCompiler

Compile the tags within the given string.

ComponentTagCompiler::compileOpeningTags() — Method in class ComponentTagCompiler

Compile the opening tags within the given string.

ComponentTagCompiler::compileSelfClosingTags() — Method in class ComponentTagCompiler

Compile the self-closing tags within the given string.

ComponentTagCompiler::componentString() — Method in class ComponentTagCompiler

Compile the Blade component string for the given component and attributes.

ComponentTagCompiler::componentClass() — Method in class ComponentTagCompiler

Get the component class for a given component alias.

ComponentTagCompiler::compileClosingTags() — Method in class ComponentTagCompiler

Compile the closing tags within the given string.

ComponentTagCompiler::compileSlots() — Method in class ComponentTagCompiler

Compile the slot tags within the given string.

ComponentTagCompiler::compileAttributeEchos() — Method in class ComponentTagCompiler

Compile any Blade echo statements that are present in the attribute string.

CompilesAuthorizationsClass in namespace Illuminate\View\Compilers\Concerns
CompilesAuthorizations::compileCan() — Method in class CompilesAuthorizations

Compile the can statements into valid PHP.

CompilesAuthorizations::compileCannot() — Method in class CompilesAuthorizations

Compile the cannot statements into valid PHP.

CompilesAuthorizations::compileCanany() — Method in class CompilesAuthorizations

Compile the canany statements into valid PHP.

CompilesAuthorizations::compileElsecan() — Method in class CompilesAuthorizations

Compile the else-can statements into valid PHP.

CompilesAuthorizations::compileElsecannot() — Method in class CompilesAuthorizations

Compile the else-cannot statements into valid PHP.

CompilesAuthorizations::compileElsecanany() — Method in class CompilesAuthorizations

Compile the else-canany statements into valid PHP.

CompilesAuthorizations::compileEndcan() — Method in class CompilesAuthorizations

Compile the end-can statements into valid PHP.

CompilesAuthorizations::compileEndcannot() — Method in class CompilesAuthorizations

Compile the end-cannot statements into valid PHP.

CompilesAuthorizations::compileEndcanany() — Method in class CompilesAuthorizations

Compile the end-canany statements into valid PHP.

CompilesClassesClass in namespace Illuminate\View\Compilers\Concerns
CompilesClasses::compileClass() — Method in class CompilesClasses

Compile the conditional class statement into valid PHP.

CompilesCommentsClass in namespace Illuminate\View\Compilers\Concerns
CompilesComments::compileComments() — Method in class CompilesComments

Compile Blade comments into an empty string.

CompilesComponentsClass in namespace Illuminate\View\Compilers\Concerns
$ CompilesComponents#componentHashStackProperty in class CompilesComponents

The component name hash stack.

CompilesComponents::compileComponent() — Method in class CompilesComponents

Compile the component statements into valid PHP.

CompilesComponents::compileClassComponentOpening() — Method in class CompilesComponents

Compile a class component opening.

CompilesComponents::compileEndComponent() — Method in class CompilesComponents

Compile the end-component statements into valid PHP.

CompilesComponents::compileEndComponentClass() — Method in class CompilesComponents

Compile the end-component statements into valid PHP.

CompilesComponents::compileSlot() — Method in class CompilesComponents

Compile the slot statements into valid PHP.

CompilesComponents::compileEndSlot() — Method in class CompilesComponents

Compile the end-slot statements into valid PHP.

CompilesComponents::compileComponentFirst() — Method in class CompilesComponents

Compile the component-first statements into valid PHP.

CompilesComponents::compileEndComponentFirst() — Method in class CompilesComponents

Compile the end-component-first statements into valid PHP.

CompilesComponents::compileProps() — Method in class CompilesComponents

Compile the prop statement into valid PHP.

CompilesConditionalsClass in namespace Illuminate\View\Compilers\Concerns
CompilesConditionals::compileAuth() — Method in class CompilesConditionals

Compile the if-auth statements into valid PHP.

CompilesConditionals::compileElseAuth() — Method in class CompilesConditionals

Compile the else-auth statements into valid PHP.

CompilesConditionals::compileEndAuth() — Method in class CompilesConditionals

Compile the end-auth statements into valid PHP.

CompilesConditionals::compileEnv() — Method in class CompilesConditionals

Compile the env statements into valid PHP.

CompilesConditionals::compileEndEnv() — Method in class CompilesConditionals

Compile the end-env statements into valid PHP.

CompilesConditionals::compileProduction() — Method in class CompilesConditionals

Compile the production statements into valid PHP.

CompilesConditionals::compileEndProduction() — Method in class CompilesConditionals

Compile the end-production statements into valid PHP.

CompilesConditionals::compileGuest() — Method in class CompilesConditionals

Compile the if-guest statements into valid PHP.

CompilesConditionals::compileElseGuest() — Method in class CompilesConditionals

Compile the else-guest statements into valid PHP.

CompilesConditionals::compileEndGuest() — Method in class CompilesConditionals

Compile the end-guest statements into valid PHP.

CompilesConditionals::compileHasSection() — Method in class CompilesConditionals

Compile the has-section statements into valid PHP.

CompilesConditionals::compileSectionMissing() — Method in class CompilesConditionals

Compile the section-missing statements into valid PHP.

CompilesConditionals::compileIf() — Method in class CompilesConditionals

Compile the if statements into valid PHP.

CompilesConditionals::compileUnless() — Method in class CompilesConditionals

Compile the unless statements into valid PHP.

CompilesConditionals::compileElseif() — Method in class CompilesConditionals

Compile the else-if statements into valid PHP.

CompilesConditionals::compileElse() — Method in class CompilesConditionals

Compile the else statements into valid PHP.

CompilesConditionals::compileEndif() — Method in class CompilesConditionals

Compile the end-if statements into valid PHP.

CompilesConditionals::compileEndunless() — Method in class CompilesConditionals

Compile the end-unless statements into valid PHP.

CompilesConditionals::compileIsset() — Method in class CompilesConditionals

Compile the if-isset statements into valid PHP.

CompilesConditionals::compileEndIsset() — Method in class CompilesConditionals

Compile the end-isset statements into valid PHP.

CompilesConditionals::compileSwitch() — Method in class CompilesConditionals

Compile the switch statements into valid PHP.

CompilesConditionals::compileCase() — Method in class CompilesConditionals

Compile the case statements into valid PHP.

CompilesConditionals::compileDefault() — Method in class CompilesConditionals

Compile the default statements in switch case into valid PHP.

CompilesConditionals::compileEndSwitch() — Method in class CompilesConditionals

Compile the end switch statements into valid PHP.

CompilesConditionals::compileOnce() — Method in class CompilesConditionals

Compile a once block into valid PHP.

CompilesConditionals::compileEndOnce() — Method in class CompilesConditionals

Compile an end-once block into valid PHP.

CompilesEchosClass in namespace Illuminate\View\Compilers\Concerns
CompilesEchos::compileEchos() — Method in class CompilesEchos

Compile Blade echos into valid PHP.

CompilesEchos::compileRawEchos() — Method in class CompilesEchos

Compile the "raw" echo statements.

CompilesEchos::compileRegularEchos() — Method in class CompilesEchos

Compile the "regular" echo statements.

CompilesEchos::compileEscapedEchos() — Method in class CompilesEchos

Compile the escaped echo statements.

CompilesErrorsClass in namespace Illuminate\View\Compilers\Concerns
CompilesErrors::compileError() — Method in class CompilesErrors

Compile the error statements into valid PHP.

CompilesErrors::compileEnderror() — Method in class CompilesErrors

Compile the enderror statements into valid PHP.

CompilesHelpersClass in namespace Illuminate\View\Compilers\Concerns
CompilesHelpers::compileCsrf() — Method in class CompilesHelpers

Compile the CSRF statements into valid PHP.

CompilesHelpers::compileDd() — Method in class CompilesHelpers

Compile the "dd" statements into valid PHP.

CompilesHelpers::compileDump() — Method in class CompilesHelpers

Compile the "dump" statements into valid PHP.

CompilesHelpers::compileMethod() — Method in class CompilesHelpers

Compile the method statements into valid PHP.

CompilesIncludesClass in namespace Illuminate\View\Compilers\Concerns
CompilesIncludes::compileEach() — Method in class CompilesIncludes

Compile the each statements into valid PHP.

CompilesIncludes::compileInclude() — Method in class CompilesIncludes

Compile the include statements into valid PHP.

CompilesIncludes::compileIncludeIf() — Method in class CompilesIncludes

Compile the include-if statements into valid PHP.

CompilesIncludes::compileIncludeWhen() — Method in class CompilesIncludes

Compile the include-when statements into valid PHP.

CompilesIncludes::compileIncludeUnless() — Method in class CompilesIncludes

Compile the include-unless statements into valid PHP.

CompilesIncludes::compileIncludeFirst() — Method in class CompilesIncludes

Compile the include-first statements into valid PHP.

CompilesInjectionsClass in namespace Illuminate\View\Compilers\Concerns
CompilesInjections::compileInject() — Method in class CompilesInjections

Compile the inject statements into valid PHP.

CompilesJsonClass in namespace Illuminate\View\Compilers\Concerns
CompilesJson::compileJson() — Method in class CompilesJson

Compile the JSON statement into valid PHP.

CompilesLayoutsClass in namespace