Event
class Event (View source)
Traits
Properties
| static protected array | $macros | The registered string macros. |
from Macroable |
| string | $expression | The cron expression representing the event's frequency. |
from ManagesAttributes |
| int|null | $repeatSeconds | How often to repeat the event during a minute. |
from ManagesAttributes |
| DateTimeZone|string | $timezone | The timezone the date should be evaluated on. |
from ManagesAttributes |
| string|null | $user | The user the command should run as. |
from ManagesAttributes |
| array | $environments | The list of environments the command should run under. |
from ManagesAttributes |
| bool | $evenInMaintenanceMode | Indicates if the command should run in maintenance mode. |
from ManagesAttributes |
| bool | $withoutOverlapping | Indicates if the command should not overlap itself. |
from ManagesAttributes |
| bool | $onOneServer | Indicates if the command should only be allowed to run on one server for each cron expression. |
from ManagesAttributes |
| int | $expiresAt | The number of minutes the mutex should be valid. |
from ManagesAttributes |
| bool | $runInBackground | Indicates if the command should run in the background. |
from ManagesAttributes |
| protected array | $filters | The array of filter callbacks. |
from ManagesAttributes |
| protected array | $rejects | The array of reject callbacks. |
from ManagesAttributes |
| string|null | $description | The human readable description of the event. |
from ManagesAttributes |
| string|null | $command | The command string. |
|
| string | $output | The location that output should be sent to. |
|
| bool | $shouldAppendOutput | Indicates whether output should be appended. |
|
| protected array | $beforeCallbacks | The array of callbacks to be run before the event is started. |
|
| protected array | $afterCallbacks | The array of callbacks to be run after the event is finished. |
|
| EventMutex | $mutex | The event mutex implementation. |
|
| Closure|null | $mutexNameResolver | The mutex name resolver callback. |
|
| protected Carbon|null | $lastChecked | The last time the event was checked for eligibility to run. |
|
| int|null | $exitCode | The exit status code of the command. |
Methods
Mix another object into the class.
Dynamically handle calls to the class.
Dynamically handle calls to the class.
Limit the environments the command should run in.
State that the command should run even in maintenance mode.
Do not allow the event to overlap each other.
Allow the event to only run on one server for each cron expression.
Set the human-friendly description of the event.
Set the human-friendly description of the event.
The Cron expression representing the event's frequency.
Schedule the event to run between start and end time.
Schedule the event to not run between start and end time.
Schedule the event to run every fifteen seconds.
Schedule the event to run multiple times per minute.
Schedule the event to run every fifteen minutes.
Schedule the event to run hourly at a given offset in the hour.
Schedule the event to run every odd hour.
Schedule the event to run every two hours.
Schedule the event to run every three hours.
Schedule the event to run every four hours.
Schedule the event to run every six hours.
Schedule the event to run daily at a given time (10:00, 19:30, etc).
Schedule the event to run twice daily.
Schedule the event to run twice daily at a given offset.
Schedule the event to run at the given minutes and hours.
Schedule the event to run weekly on a given day and time.
Schedule the event to run monthly on a given day and time.
Schedule the event to run twice monthly at a given time.
Schedule the event to run on the last day of the month.
Schedule the event to run quarterly on a given day and time.
Schedule the event to run yearly on a given month, day, and time.
Set the days of the week the command should run on.
Splice the given value into the given position of the expression.
Get the class name of the first parameter of the given Closure.
Get the class names of the first parameter of the given Closure, including union types.
Get the class names / types of the parameters of the given Closure.
Call the given Closure with this instance then return the instance.
Create a new event instance.
Get the default output depending on the OS.
Determine if the event should skip because another process is overlapping.
Determine if the event has been configured to repeat multiple times per minute.
Determine if the event is ready to repeat.
Build the command string.
Determine if the event runs in maintenance mode.
Determine if the Cron expression passes.
Determine if the event runs in the given environment.
Ensure that the output is stored on disk in a log file.
Send the output of the command to a given location.
Append the output of the command to a given location.
E-mail the results of the scheduled operation.
E-mail the results of the scheduled operation if it produces output.
E-mail the results of the scheduled operation if it fails.
Ensure that the command output is being captured.
E-mail the output of the event to the recipients.
Get the e-mail subject line for output results.
Register a callback to ping a given URL before the job runs.
Register a callback to ping a given URL before the job runs if the given condition is true.
Register a callback to ping a given URL after the job runs.
Register a callback to ping a given URL after the job runs if the given condition is true.
Register a callback to ping a given URL if the operation succeeds.
Register a callback to ping a given URL if the operation succeeds and if the given condition is true.
Register a callback to ping a given URL if the operation fails.
Register a callback to ping a given URL if the operation fails and if the given condition is true.
Get the callback that pings the given URL.
Register a callback that uses the output after the job runs.
Register a callback that uses the output if the operation succeeds.
Register a callback that uses the output if the operation fails.
Get a callback that provides output.
Get the summary of the event for display.
Determine the next due date for an event.
Get the Cron expression for the event.
Get the mutex name for the scheduled command.
Set the mutex name or name resolver callback.
Delete the mutex for the event.
Format the given command string with a normalized PHP binary path.
Details
static void
macro(string $name, object|callable $macro)
Register a custom macro.
static void
mixin(object $mixin, bool $replace = true)
Mix another object into the class.
static bool
hasMacro(string $name)
Checks if macro is registered.
static void
flushMacros()
Flush the existing macros.
static mixed
__callStatic(string $method, array $parameters)
Dynamically handle calls to the class.
mixed
__call(string $method, array $parameters)
Dynamically handle calls to the class.
$this
user(string $user)
Set which user the command should run as.
$this
environments(array|mixed $environments)
Limit the environments the command should run in.
$this
evenInMaintenanceMode()
State that the command should run even in maintenance mode.
$this
withoutOverlapping(int $expiresAt = 1440)
Do not allow the event to overlap each other.
The expiration time of the underlying cache lock may be specified in minutes.
$this
onOneServer()
Allow the event to only run on one server for each cron expression.
$this
runInBackground()
State that the command should run in the background.
$this
when(Closure|bool $callback)
Register a callback to further filter the schedule.
$this
skip(Closure|bool $callback)
Register a callback to further filter the schedule.
$this
name(string $description)
Set the human-friendly description of the event.
$this
description(string $description)
Set the human-friendly description of the event.
$this
cron(string $expression)
The Cron expression representing the event's frequency.
$this
between(string $startTime, string $endTime)
Schedule the event to run between start and end time.
$this
unlessBetween(string $startTime, string $endTime)
Schedule the event to not run between start and end time.
$this
everySecond()
Schedule the event to run every second.
$this
everyTwoSeconds()
Schedule the event to run every two seconds.
$this
everyFiveSeconds()
Schedule the event to run every five seconds.
$this
everyTenSeconds()
Schedule the event to run every ten seconds.
$this
everyFifteenSeconds()
Schedule the event to run every fifteen seconds.
$this
everyTwentySeconds()
Schedule the event to run every twenty seconds.
$this
everyThirtySeconds()
Schedule the event to run every thirty seconds.
protected $this
repeatEvery(int $seconds)
Schedule the event to run multiple times per minute.
$this
everyMinute()
Schedule the event to run every minute.
$this
everyTwoMinutes()
Schedule the event to run every two minutes.
$this
everyThreeMinutes()
Schedule the event to run every three minutes.
$this
everyFourMinutes()
Schedule the event to run every four minutes.
$this
everyFiveMinutes()
Schedule the event to run every five minutes.
$this
everyTenMinutes()
Schedule the event to run every ten minutes.
$this
everyFifteenMinutes()
Schedule the event to run every fifteen minutes.
$this
everyThirtyMinutes()
Schedule the event to run every thirty minutes.
$this
hourly()
Schedule the event to run hourly.
$this
hourlyAt(array|string|int $offset)
Schedule the event to run hourly at a given offset in the hour.
$this
everyOddHour(array|string|int $offset = 0)
Schedule the event to run every odd hour.
$this
everyTwoHours(array|string|int $offset = 0)
Schedule the event to run every two hours.
$this
everyThreeHours(array|string|int $offset = 0)
Schedule the event to run every three hours.
$this
everyFourHours(array|string|int $offset = 0)
Schedule the event to run every four hours.
$this
everySixHours(array|string|int $offset = 0)
Schedule the event to run every six hours.
$this
daily()
Schedule the event to run daily.
$this
at(string $time)
Schedule the command at a given time.
$this
dailyAt(string $time)
Schedule the event to run daily at a given time (10:00, 19:30, etc).
$this
twiceDaily(int $first = 1, int $second = 13)
Schedule the event to run twice daily.
$this
twiceDailyAt(int $first = 1, int $second = 13, int $offset = 0)
Schedule the event to run twice daily at a given offset.
protected $this
hourBasedSchedule(array|string|int $minutes, array|string|int $hours)
Schedule the event to run at the given minutes and hours.
$this
weekdays()
Schedule the event to run only on weekdays.
$this
weekends()
Schedule the event to run only on weekends.
$this
mondays()
Schedule the event to run only on Mondays.
$this
tuesdays()
Schedule the event to run only on Tuesdays.
$this
wednesdays()
Schedule the event to run only on Wednesdays.
$this
thursdays()
Schedule the event to run only on Thursdays.
$this
fridays()
Schedule the event to run only on Fridays.
$this
saturdays()
Schedule the event to run only on Saturdays.
$this
sundays()
Schedule the event to run only on Sundays.
$this
weekly()
Schedule the event to run weekly.
$this
weeklyOn(array|mixed $dayOfWeek, string $time = '0:0')
Schedule the event to run weekly on a given day and time.
$this
monthly()
Schedule the event to run monthly.
$this
monthlyOn(int $dayOfMonth = 1, string $time = '0:0')
Schedule the event to run monthly on a given day and time.
$this
twiceMonthly(int $first = 1, int $second = 16, string $time = '0:0')
Schedule the event to run twice monthly at a given time.
$this
lastDayOfMonth(string $time = '0:0')
Schedule the event to run on the last day of the month.
$this
quarterly()
Schedule the event to run quarterly.
$this
quarterlyOn(int $dayOfQuarter = 1, string $time = '0:0')
Schedule the event to run quarterly on a given day and time.
$this
yearly()
Schedule the event to run yearly.
$this
yearlyOn(int $month = 1, int|string $dayOfMonth = 1, string $time = '0:0')
Schedule the event to run yearly on a given month, day, and time.
$this
days(array|mixed $days)
Set the days of the week the command should run on.
$this
timezone(DateTimeZone|string $timezone)
Set the timezone the date should be evaluated on.
protected $this
spliceIntoPosition(int $position, string $value)
Splice the given value into the given position of the expression.
protected string
firstClosureParameterType(Closure $closure)
Get the class name of the first parameter of the given Closure.
protected array
firstClosureParameterTypes(Closure $closure)
Get the class names of the first parameter of the given Closure, including union types.
protected array
closureParameterTypes(Closure $closure)
Get the class names / types of the parameters of the given Closure.
tap($callback = null)
Call the given Closure with this instance then return the instance.
void
__construct(EventMutex $mutex, string $command, DateTimeZone|string|null $timezone = null)
Create a new event instance.
string
getDefaultOutput()
Get the default output depending on the OS.
void
run(Container $container)
Run the given event.
bool
shouldSkipDueToOverlapping()
Determine if the event should skip because another process is overlapping.
bool
isRepeatable()
Determine if the event has been configured to repeat multiple times per minute.
bool
shouldRepeatNow()
Determine if the event is ready to repeat.
protected int
start(Container $container)
Run the command process.
protected int
execute(Container $container)
Run the command process.
void
finish(Container $container, int $exitCode)
Mark the command process as finished and run callbacks/cleanup.
void
callBeforeCallbacks(Container $container)
Call all of the "before" callbacks for the event.
void
callAfterCallbacks(Container $container)
Call all of the "after" callbacks for the event.
string
buildCommand()
Build the command string.
bool
isDue(Application $app)
Determine if the given event should run based on the Cron expression.
bool
runsInMaintenanceMode()
Determine if the event runs in maintenance mode.
protected bool
expressionPasses()
Determine if the Cron expression passes.
bool
runsInEnvironment(string $environment)
Determine if the event runs in the given environment.
bool
filtersPass(Application $app)
Determine if the filters pass for the event.
$this
storeOutput()
Ensure that the output is stored on disk in a log file.
$this
sendOutputTo(string $location, bool $append = false)
Send the output of the command to a given location.
$this
appendOutputTo(string $location)
Append the output of the command to a given location.
$this
emailOutputTo(array|mixed $addresses, bool $onlyIfOutputExists = true)
E-mail the results of the scheduled operation.
$this
emailWrittenOutputTo(array|mixed $addresses)
E-mail the results of the scheduled operation if it produces output.
$this
emailOutputOnFailure(array|mixed $addresses)
E-mail the results of the scheduled operation if it fails.
protected void
ensureOutputIsBeingCaptured()
Ensure that the command output is being captured.
protected void
emailOutput(Mailer $mailer, array $addresses, bool $onlyIfOutputExists = true)
E-mail the output of the event to the recipients.
protected string
getEmailSubject()
Get the e-mail subject line for output results.
$this
pingBefore(string $url)
Register a callback to ping a given URL before the job runs.
$this
pingBeforeIf(bool $value, string $url)
Register a callback to ping a given URL before the job runs if the given condition is true.
$this
thenPing(string $url)
Register a callback to ping a given URL after the job runs.
$this
thenPingIf(bool $value, string $url)
Register a callback to ping a given URL after the job runs if the given condition is true.
$this
pingOnSuccess(string $url)
Register a callback to ping a given URL if the operation succeeds.
$this
pingOnSuccessIf(bool $value, string $url)
Register a callback to ping a given URL if the operation succeeds and if the given condition is true.
$this
pingOnFailure(string $url)
Register a callback to ping a given URL if the operation fails.
$this
pingOnFailureIf(bool $value, string $url)
Register a callback to ping a given URL if the operation fails and if the given condition is true.
protected Closure
pingCallback(string $url)
Get the callback that pings the given URL.
protected ClientInterface
getHttpClient(Container $container)
Get the Guzzle HTTP client to use to send pings.
$this
before(Closure $callback)
Register a callback to be called before the operation.
$this
after(Closure $callback)
Register a callback to be called after the operation.
$this
then(Closure $callback)
Register a callback to be called after the operation.
$this
thenWithOutput(Closure $callback, bool $onlyIfOutputExists = false)
Register a callback that uses the output after the job runs.
$this
onSuccess(Closure $callback)
Register a callback to be called if the operation succeeds.
$this
onSuccessWithOutput(Closure $callback, bool $onlyIfOutputExists = false)
Register a callback that uses the output if the operation succeeds.
$this
onFailure(Closure $callback)
Register a callback to be called if the operation fails.
$this
onFailureWithOutput(Closure $callback, bool $onlyIfOutputExists = false)
Register a callback that uses the output if the operation fails.
protected Closure
withOutputCallback(Closure $callback, bool $onlyIfOutputExists = false)
Get a callback that provides output.
string
getSummaryForDisplay()
Get the summary of the event for display.
Carbon
nextRunDate(DateTimeInterface|string $currentTime = 'now', int $nth = 0, bool $allowCurrentDate = false)
Determine the next due date for an event.
string
getExpression()
Get the Cron expression for the event.
$this
preventOverlapsUsing(EventMutex $mutex)
Set the event mutex implementation to be used.
string
mutexName()
Get the mutex name for the scheduled command.
$this
createMutexNameUsing(Closure|string $mutexName)
Set the mutex name or name resolver callback.
protected void
removeMutex()
Delete the mutex for the event.
static string
normalizeCommand(string $command)
Format the given command string with a normalized PHP binary path.